Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (2567)
  • Image (487)
  • Vidéo (46)
  • Toutes les Étoiles
    • Toutes les Étoiles(2567)
    • 5 Étoile(2464)
    • 4 Étoile(80)
    • 3 Étoile(9)
    • 2 Étoile(5)
    • 1 Étoile(9)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (France)
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 06/07/2016

    http://www.megafileupload.com/bi0p/CRESFW.BIN This Firmware allows HD and PAL

    Commentaires (4)
    Afficher l'original
  • 24/12/2016

    DVR constantly black screens.Virtually useless. Disappointed.

    Afficher l'original
  • 30/11/2016

    I added a tiny 5V linear step-down regulator from FlyTron inside the case so that I can power it from 2S. There are enough gaps around the connectors to pass wires through. It step-down fits nicely once you've cut/sanded off the unnecessary servo signal part of its PCB. With the regular inside, I glued 2 servo plugs for the AV in and out to the top as well as a connector for 2S power from the balance lead of the goggle battery. The DVR is stuck to the front of the goggles using velcro. Now I can record and view footage in the goggles simply by switching the servo connector. See the photos for details.

    Afficher l'original
  • 31/03/2017

    I was looking for an effordable way to record the video input of my Fatshark goggle (Attitude V2). There are numerous DVRs on the market, but most of them are priced way too high. This one was a perfect match! Easy to install to my goggle (see pictures), easy to use - and the recorded quality is nice. I use to record in 720p (also with VGA video sources) because the DVR does a good job in upscaling, so videos do not appear too pixelated then. I soldered the DRV directly to the receiver board of my Fatshark Attitude V2, which is an easy task once you figured out what pins to use. You only have to solder 3 wires.

    Afficher l'original
  • 01/07/2016

    This is a clone of HMDVR, BUG which does not store the video mode will be resolved in firmware update HMDVR, PAL is the bottom of the screen is cut ...

    Commentaires (1)
    Afficher l'original
  • 26/11/2017

    10$! Цена супер. Пишет отлично.Русское меню! Подключил через переключатель (тумблер). Можно выбрать: через DVR или сразу от видеоприёмника на монитор. Но пишет в обеих положениях! 2Gb памяти на 20 минут в формате D1. Очень удобно, что записанное видео можно перемотать в обе стороны (ускоренное воспроизведение).

    Afficher l'original
  • 11/11/2016

    It's really cheap for such a product. You can setup video recording in a few minutes, and it's really easy to use I followed a youtube video to integrate it in my Eachine VR-007, it's really easy even if you are not good at soldering and it works perfectly A 8GB card can record more than 4 hours of VGA quality, and about 2h30 of hd quality

    Commentaires (2)
    Afficher l'original
  • 24/08/2016

    Пришла с проблемой как и у всех. Прошил, выбор разрешения при записи заработал, но картинку в ПАЛе (снизу) всё так же обрезает. Будем ждать новой версии прошивки. А в остальном - всё нормально. Качество хорошее, меню удобное, работает от аккума 1S. ФПВ-шникам рекомендую!

    Afficher l'original
  • 15/02/2017

    I was pretty impressed when I received the DVR, it is really tiny. You get all the wiring you need, even an extra cable if you want to wire your own buttons. Even comes with a cable with cinch plugs for Audio and Video, so you can hook it up directly to your telly. The case is held together by 3 screws and you can easily strip the case to save some space. You start and stop recording by pressing one button, could not be easier than that. The live feed is lagging when recording, but playback works flawlessly, you can even fast forward the recording. You can also format the SD card and delete single files from within the DVR menu.

    Afficher l'original
  • 17/06/2017

    mod my fatshark atittude v1 to work with this dvr, i try to make a very clean installation

    Afficher l'original

    Total 0 pages

    Aller à la page

    Vous pourriez être intéressé par

    recommendation for you
    • 32,74€
    • 24,69€
    • 11,12€
    • 52,38€
    • 673,61€
    • 52,38€
    • 25,07€
    • 17,77€
    • 233,89€
    • 8,41€
    • 71,01€
    • 10,56€
    • 14,02€
    • 17,77€
    • 54,53€
    • 16,98€
    • 46,77€
    • 25,25€