Meilleures offres pour Éclairage intérieur de la voiture,Alimentation CC,Contrôleur de température

Mikebeeny 02/12/2021

Will run at full brightness from 11 volts. Appling more volts does not use more power or get brighter. Claims it will work at up to 80 volts. I'm not brave enough to try this. I have tried 24 volts, all is fine, no current increase or brightness. Very good even bright light. uses 9.8 watts at 12volts DC. Quite close to the 10 watt rated.

Barre lumineuse LED de 28CM pour l'intérieur de voiture de 12V-80V avec interrupteur ON/OFF pour fourgonnettes, autobus, caravanes et camions

20,62€ 14,06€

3

Commentaires (0)

Topshak NPS605W 110V/220V Alimentation électrique numérique réglable CC 0-60V 0-5A 300W régulée par commutation pour laboratoire

93,15€ 111,60€

Q: can I connect either Power supply DC connection to Ground?

demandé par BG400541812 sur 2022-11-20 01:58:35

Mikebeeny Yes, the outputs are floating, I use 2 power supplies in series to get a positive & negative output. I have removed the power supply earth to mains on the power in however to remove ground loops when testing amplifiers.

2022-11-20 02:07:00 Utile

Soumettre

réponses (1)

Topshak NPS605W 110V/220V Alimentation électrique numérique réglable CC 0-60V 0-5A 300W régulée par commutation pour laboratoire

93,15€ 111,60€

Q: qual país ela foi fabricada ?

demandé par BG554152511 sur 2022-06-29 12:45:36

Mikebeeny China of course.

2022-06-29 12:54:26 Utile (1)

Soumettre

réponses (5)

Mikebeeny 02/12/2021

I purchased this for use with a fan. It does work in so far as it does change the speed of the fan but it makes the fan motor buzz quite loudly. Making it's use out of the question. Will work fine with heaters or lamps but NOT induction motors.

Contrôleur de gradation de température de vitesse de tension réglable AC 0-220V 4000W pour thermostat Light Fan Motor Dimmer.

18,00€ 27,19€

2

Commentaires (1)

Mikebeeny 11/11/2021

You will not get more than about 20 watts in bright sun. Calling this 100 watts, well, it's got to be a joke. For charging a small battery it's fine. I use the 5 volt output to charge, my power bank, phone, fan etc Will not charge a flat car battery. I have reviewed this in full on my YouTube channel. Look for my name. MICHAEL BEENY

Kit de panneau solaire 100W avec chargeur de batterie 12V et contrôleur LCD 10-100A pour caravane, van, bateau

33,75€ 56,26€

3

Commentaires (0)

Mikebeeny 04/05/2022

Previously I had 2 of the 0-30 volt versions. Perfect. I have now replaced them with 2 of the 60 volt version. I have tested both for a number of hours on full 5 amp loads. They barely get warm. My load box however had to be fan cooling. I use two in series to get both a plus and minus voltage for amplifier testing. See these in use on my YouTube channel here https://youtu.be/s9CDY9rXNos

Topshak NPS605W 110V/220V Alimentation électrique numérique réglable CC 0-60V 0-5A 300W régulée par commutation pour laboratoire

93,15€ 111,60€

0

Commentaires (0)

Meanwell LRS-350 Alimentation à découpage 24V 36V 48V 350W30mm Épaisseur Smps Meilleur convertisseur de tension

57,40€ 60,02€

Q: Often these arrive damaged due to NO packing, just loose in a cardboard box WARNING.

demandé par Mikebeeny sur 2022-03-28 10:46:37

Soumettre

réponses (0)

Mikebeeny 21/03/2022

Sadly the power supply arrived quite badly bent and damaged, due to completely inadequate packing. The box it's self was not damaged but inside not even the smallest piece of bubble rap. I opened the unit, luckily I did to find the PCB squashed against the case. After careful re bending the metal work and close inspection I powered it up via a dim bulb. To my amazement it worked. Voltage is show on the LED is accurate. At the time of writing this, I have not done any current tests. Banggood, you need to take better control of the packing, I cam so close to getting a refund. The case still looks a mess. Because of this I cannot recommend this item. I will be doing a full review on my YouTube channel soon. I have tied loading pictures but it does not like my camera for some reason. Very sad!

Réglable AC 110 / 220V à 0-48V 10A 480W Commutateur d'Alimentation Pilote LCD Affichage pour Sangle de Lumière LED

49,82€ 52,51€

0

Commentaires (1)

Mikebeeny Sadly only worked for 6 months! More land fill.

Mikebeeny 25/07/2016

Looks good, well made and it works.

Distributeur automatique de savon liquide avec capteur infrarouge en acier inoxydable pour salle de bain et cuisine

23,82€ 25,31€

0

Commentaires (1)

Mikebeeny 09/12/2021

Quick postage. Look OK but not tested anything yet. Time will tell.

200 pièces Kit assorti de diodes Schottky à commutation rapide 1N4001 1N4004 1N4007 1N5408 UF4007 FR207 1N5817 1N5819 1N5822 1N4148 RL207

9,70€ 10,31€

0

Commentaires (1)

Mikebeeny 02/12/2021

Well made, good display package. All 3 work as expected.

[Lot de 3] BlitzWolf® BW-TC15 3A QC3.0 Câble USB Type-C de charge rapide pour la synchronisation de données et le transfert de cordon de ligne de 6 pi / 1,8 m pour Samsung Galaxy Note 20 Huawei P40 Mi10 OnePlus 8

11,71€ 15,00€

0

Commentaires (1)

Mikebeeny I am waiting for a credit on this. Very unsafe, No cable clamp, case not earthed. Mains cable drapes across the heatsink. etc. A good product to make you dead.!!

Mikebeeny 02/12/2021

I purchased this for use with a fan. It does work in so far as it does change the speed of the fan but it makes the fan motor buzz quite loudly. Making it's use out of the question. Will work fine with heaters or lamps but NOT induction motors.

Contrôleur de gradation de température de vitesse de tension réglable AC 0-220V 4000W pour thermostat Light Fan Motor Dimmer.

18,00€ 27,19€

2

Commentaires (1)

Pinces Ampèremétriques Digitales AC/DC HT206A/HT206B/HT206D pour Mesurer la Tension AC/DC, le Courant AC/DC, Multimètre à Pince NCV

29,23€ 30,94€

Q: My 206D which i just got it few days back showing default A is 0.9 once i turned it On without being near to any current at all, even if it in the case.Is it Malfunctioning or i have to do some sort of calibrations and how ? TIA

demandé par amerkhafagi sur 2021-11-21 12:27:26

Mikebeeny You will need to zero the meter, probably on most clamp measurements. This is quite common. After you turn it on , it will have a random number on the display. Simply press the red button marked Z stoke F a couple of seconds till it bleeps and reads zero.

2021-11-21 04:28:43 Utile (1)

Soumettre

réponses (1)

Mikebeeny 11/11/2021

All well made and work well. My only criticism is the crock clip leads. They are just crimped, really needs to be soldered for a much better connection. Note the wire is very thin, not really suitable for more than about 100mA as the voltage drop is high due to high resistance.