FML
mon contenu
Tous les messages
Commentaires
Commentaires
réponses
Questions

Tous les messages

FML 20/03/2021
I bought two MT-8 kits with the CNC upgrades. One to drive and another a few months later as a spare part dispenser. When disassembling the second MT-8, I noticed very negatively that way too much loctite was used. I didn't get some screws loosened and damaged my tool in the process. I had to drill out the screws. The lower suspension brackets (8045 + 8046) were then destroyed. Too much loctite was also used on the c-mounts (8134) and in the hex wheel hub mounts (8086). The screws can only be loosened with very massive screwdrivers. The seal (8265) for the receiver box was missing in both kits. I have installed a 1950 Kv Surpass Taurus 4274 bruhless motor with the standard 13T gear (8195) and standard 48T spur gear (8473) on my MT-8. I recommend installing the stronger motor base (8487). From a 3S Lipo the MT-8 is already quite fast. With a 4S Lipo, wheelies are no problem and the MT-8 becomes a projectile that hardly brings the engine power to the road. The MT-8 then flies over the area and is difficult to control. The construction then reaches its limit. Because of the large wheels, I recommend a powerful 35 kg servo. I also recommend installing the front bumper (8481) and the rear wheel (8482). The front bumper can be upgraded with LEDs. I have a lot of fun with the car, but I would like a little more care when assembling it in the factory. And please don't use so much loctite anymore.
Camion électrique ZD Racing 9116 1/8 4WD sans balais avec cadre en métal, voiture RC à 100 km/h sans pièces électriques
193,73€ 257,39€
22
Recommandations
Commentaires (10)
FML 27/02/2021
Powerful servo at a low price. I use the servo in a 1/8 off-road RC car. I can recommend the servo.
Servo Digital 35KG à engrenages métalliques étanches à fort couple SPT5435LV-180W pour robot RC et voiture RC
23,43€ 24,90€
1
Recommandations
Commentaires (0)

FML Thank you for your help. Next time i will heat the screws.

FML 20/03/2021
I bought two MT-8 kits with the CNC upgrades. One to drive and another a few months later as a spare part dispenser. When disassembling the second MT-8, I noticed very negatively that way too much loctite was used. I didn't get some screws loosened and damaged my tool in the process. I had to drill out the screws. The lower suspension brackets (8045 + 8046) were then destroyed. Too much loctite was also used on the c-mounts (8134) and in the hex wheel hub mounts (8086). The screws can only be loosened with very massive screwdrivers. The seal (8265) for the receiver box was missing in both kits. I have installed a 1950 Kv Surpass Taurus 4274 bruhless motor with the standard 13T gear (8195) and standard 48T spur gear (8473) on my MT-8. I recommend installing the stronger motor base (8487). From a 3S Lipo the MT-8 is already quite fast. With a 4S Lipo, wheelies are no problem and the MT-8 becomes a projectile that hardly brings the engine power to the road. The MT-8 then flies over the area and is difficult to control. The construction then reaches its limit. Because of the large wheels, I recommend a powerful 35 kg servo. I also recommend installing the front bumper (8481) and the rear wheel (8482). The front bumper can be upgraded with LEDs. I have a lot of fun with the car, but I would like a little more care when assembling it in the factory. And please don't use so much loctite anymore.
Camion électrique ZD Racing 9116 1/8 4WD sans balais avec cadre en métal, voiture RC à 100 km/h sans pièces électriques
193,73€ 257,39€
22
Commentaires (10)
Bras inférieur avant ZD Racing 8041 pour pièces de voiture RC 1/8 9116
9,58€ 10,14€

Q: is this for the front and the rear?

demandé par BG815152383 sur 2021-08-09 01:33:03

FML for the front

2021-08-11 02:47:15 Utile (0)
Soumettre
réponses (4)
Camion électrique ZD Racing 9116 1/8 4WD sans balais avec cadre en métal, voiture RC à 100 km/h sans pièces électriques
193,73€ 257,39€

Q: Can this use a 4274 motor? So a 42mm diameter?

demandé par BG471115169 sur 2021-06-09 04:53:56

FML YES, a 4274 Motor fits perfectly. There is enough space.

2021-06-14 03:24:54 Utile (0)
Soumettre
réponses (4)
FML 20/03/2021
Attention there are two versions of part 8134! The version installed in my Pirates 3/9116 (KIT) has a ball head installed at the lower end, the version supplied has upper and lower bushings (8037) that hold the steering cups in the c-cup. Unfortunately, the 8037 bushings are not available as spare parts. In the instruction manual both the version with bushing (Page 12) and the version with the ball head (Page 23) are shown. So if you have the version with the ball head and have ordered the steering cups with bushing, you have a problem.
Supports en C ZD Racing 8134 pour le modèle de véhicule 9116 à l'échelle 1/8 Pièces de voiture RC
8,52€ 9,22€
0
Recommandations
Commentaires (1)
FML 20/03/2021
The new version is a bit stronger.
Arbre d'entraînement horizontal ZD Racing 8015 pour voiture RC 9116 1/8
15,97€ 16,60€
0
Recommandations
Commentaires (0)
FML 20/03/2021
ATTENTION the M4x10 grub screw is not included and must be removed from the old part.
Bras inférieur avant ZD Racing 8041 pour pièces de voiture RC 1/8 9116
9,58€ 10,14€
0
Recommandations
Commentaires (0)
FML 27/02/2021
The loader works fine. Direct 220V connection built in. It's easy to use. The charger cannot discharge LiPo batteries. I can recommend the loader.
ToolkitRC M4Q 4x50W 5A AC 100W 4 ports DC chargeur intelligent XT60 / XT30 en option pour 1-4S Lipo Batterie
91,23€ 93,17€
0
Recommandations
Commentaires (0)
FML 27/02/2021
The camera works reliably. The autofocus works fine. Viewing angle is very wide. The picture has very warm colors. Clamping function and tripod thread allow many mounting options. Very good for the price.
Mise à niveau de la caméra IP Xiaovv 3MP USB Webcam 150 ° Optimisation de l'image ultra grand angle Traitement de la beauté Foucus automatique pour la diffusion en direct de la réunion d'enseignement en ligne Caméra Web de conférence
16,60€ 24,91€
0
Recommandations
Commentaires (0)
FML 27/02/2021
You should always have these spare parts on hand.
ZD 9116 RC Car Racing 8054 Broches pour Bras de Suspension Inférieurs Pièces de Modèle de Véhicule
11,71€ 12,91€
0
Recommandations
Commentaires (0)
FML 27/02/2021
Temperature sensor reacts quickly to temperature changes. All good.
Accessoires de charge à courant constant 65W avec sonde de température NTC DC5525, clip crocodile, adaptateurs de déclenchement PD3.0 QC2.0/QC3.0 pour testeur USB UD18
10,65€ 11,06€
0
Recommandations
Commentaires (0)
FML 27/02/2021
You should always have these spare parts on hand.
Bras inférieur avant ZD Racing 8041 pour pièces de voiture RC 1/8 9116
9,58€ 10,14€
0
Recommandations
Commentaires (0)
FML 27/02/2021
Comprehensive set of the smallest screws on the ZD Racing 9116 (MT-8)
Ensemble de vis en métal 42PCS 8084 pour ZD Racing 9116 08427 1/8 Pièces de rechange de voiture Rc
10,65€ 11,06€
0
Recommandations
Commentaires (0)
FML 27/02/2021
Warms very well. Level 1 of 3 can already be clearly felt. The vest is cut very tight. I wear an L (176cm, 70 kg) under a business shirt. I can recommend the vest.
Gilet chauffant électrique à alimentation USB, veste de chauffage intelligent pour les courses, meilleur pour l'hiver
59,40€ 62,73€
0
Recommandations
Commentaires (0)
FML 27/02/2021
Simple quality at an affordable price. Not a precision instrument, but perfectly adequate for simple measurements.
Vernier de règle de jauge numérique électronique de 6 pouces (150 mm) en fibre de carbone composite
8,94€ 11,06€
0
Recommandations
Commentaires (0)
Camion électrique ZD Racing 9116 1/8 4WD sans balais avec cadre en métal, voiture RC à 100 km/h sans pièces électriques
193,73€ 257,39€

Q: what's largest size motor that can be fitted?

demandé par Amin1987 sur 2020-12-29 04:20:25

FML A 4292 Brushless Motor. In use a 4274 and there is free space at the Car.

2021-01-01 04:14:11 Utile (0)
Soumettre
réponses (2)
FML 22/07/2020
Sehr schnelle Lieferung in 7 Werktagen. Lieferung mit DHL. Lieferstatus perfekt abgebildet. Artikel wie beschrieben. Alles bestens.
Ensemble de tournevis de précision polyvalent XIAOMI Mijia 24 en 1 en aluminium avec embouts en acier S2 pour la réparation
32,88€ 39,66€
0
Recommandations
Commentaires (0)

Vous êtes l'expert, pouvez-vous aider?

Nous vous invitons sincèrement à vous abonner à l'e-mail d'invitation à répondre!

Si vous vous abonnez, nous vous inviterons par e-mail à répondre aux questions des gens sur les produits. En vous abonnant, vous gagnerez également le «Badge utile»! Vous pouvez vous désinscrire à tout moment sur la page des paramètres de confidentialité.

Aidez les autres et soyez plus heureux!

  • S'abonner

À propos des badges

Les badges sont liés à la communauté et les utilisateurs le font en créant un contenu de qualité, en complétant des missions ou en participant à des activités spéciales. Les personnes spécifiques auront également leur propre badge exclusif.
Badge du PDG

L’insigne du PDG appartient uniquement au patron de Banggood.

Les badges que vous pouvez gagner arrivent bientôt
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe