Meilleures offres pour Papier de transfert thermique pour PCB,Carte de protection de batterie - Banggood France Achats en ligne

MartinC

mon contenu: Tous les messages; Commentaires; Commentaires; réponses; Questions

Tous les messages

MartinC 10/04/2019

Used this for the first time today, worked far better than I expected, laser printed a small circuit, taped it to pcb material that had been cleaned with alcohol following cleaning with fine steel wool and then ironed it in place. The backing paper peeled clean off and left an accurate pcb mask on the copper. I etched with ferrous chloride and was left with a perfect pcb. Only criticism was that the paper was poorly protected in the post and `i had to leave it under a heavy weight for a few days to flatten it to an acceptable level to be used in my HP laser printer. I found that my printer will take these A4 sheets cut into quarters, i.e. A6. this makes it a lot more economical to use. My next experiment is to see if it can be re used for another copy of the circuit. I will definitely be buying more of this in the future.

10 feuilles A4 de papier thermique pour transfert thermique de PCB Toner pour prototype électronique DIY. Carte de circuit imprimé PCB

7,45€ 4,14€

1

Commentaires (0)

MartinC 12/02/2019

I use these with salvaged Li-ion/ Li-Po cells along with a small boost converters to power LED’s in 3D printed light fittings and displays.

Module de charge de batterie au lithium TP4056 Micro USB 5V 1A 10Pcs Conseil de protection TE585 Chargeur de batterie Lipo

10,65€ 11,06€

0

Commentaires (0)

MartinC 25/03/2019

These are a direct replacement for Gilllette blades and seem just as good only a fraction of the price.

GFLV® 16pcs 5 Couches Lames de rasoir Tête de Rasage Remplacement pour Gillette

18,44€ 27,67€

0

Commentaires (0)

MartinC 29/05/2019

excellent little lights, quite bright on full brightness but even on a lower setting to conserve battery life the are bright enough to achieve a good effect. remote control works well and at a reasonable range. haven’t tried submerging them yet but have been left outside for a week in heavy rain with no ill effects.

10X Télécommande Imperméable À L'eau RGB LED Submersible Bougie Thé Lumière Lampe De Table Décoration

11,38€ 12,61€

0

Commentaires (0)

MartinC 01/08/2019

neat little module, easy to set up and use.

3Pcs DS3231 AT24C32 IIC Real Module d'horloge Geekcreit pour Arduino - produits qui fonctionnent avec les cartes Arduino officielles

0

Commentaires (0)

MartinC 01/08/2019

neat little unit. does what I need it to.

Testeur de transistor graphique LCD Geekcreit® LCR-T4 12864 Résistance, Capacité, ESR, Compteur SCR

13,78€ 16,60€

0

Commentaires (0)

MartinC 01/08/2019

As described. fit breadboards well.

120pcs Câble jumper de 20cm mâle à mâle pour breadboard, câble Dupont

6,77€ 6,45€

0

Commentaires (0)

Module abaisseur de convertisseur abaisseur d'alimentation réglable DC-DC

8,52€ 9,22€

Q: What is the EN pin on the input for?

demandé par MartinC sur 2019-04-18 01:57:42

APteH EN is chip enable. A high is Enable, low is disable

2019-05-20 06:42:31 Utile (2)

Soumettre

réponses (3)

MartinC 10/04/2019

Perfect for cleaning up holes in models that have been 3D printed. I now deliberately make the holes a fraction smaller than needed so that I can use this tool to achieve perfect holes.

Raitool ™ DT01 0-14mm Noir Professionnel Couteau d'Alésoir Forage Outil d'Alésoir du Bord

7,37€ 9,22€

0

Commentaires (0)

MartinC 25/03/2019

excellent for micro controller projects suck as arduino controlled lighting.

Module de relais à optocoupleur à déclenchement de niveau 1 canal 5V

3,68€ 8,29€

0

Commentaires (0)

MartinC 25/03/2019

excellent. use them for running esp8266 based projects from mains supply. such as Alexa controlled sockets and lights.

Module d'alimentation à découpage isolé AC-DC Step Down 5V 700mA 3.5W 3Pcs

10,65€ 11,06€

0

Commentaires (0)

MartinC 25/03/2019

exactly what they claim to be, good selection of cheap resistors. you just need to find an appropriate method of storage as they are just strips of resistors.

1000pcs 5% 1 / 2w 0.5w résistance de film métallique 50 valeurs de kit assorti 0.1 ohm ~ condensateur ohm 4.7m

14,91€ 15,67€

0

Commentaires (0)

MartinC 12/02/2019

I used one of these to repair a faulty touch sensitive lamp and it fitted as a direct replacement. This has 3 light levels as opposed to just the on/off unit that it replaced. Be aware that it is not suitable for led or cfl lamps, just filament or halogen bulbs. I think that is how the original one was destroyed.

AC 220V 3 voies interrupteur de capteur de commande tactile variateur lampe pièces de lumière de bureau

3,68€ 10,14€

0

Commentaires (0)

MartinC 09/02/2019

Used this to power an LED display light, measured capacity appears to be 1750 mAh when measured using a TP4056 as charge controller and discharging at a current of 40 mA.

Eachine EV800 lunettes FPV pièce détachée batterie 3.7v 2000mah lipo

10,53€ 12,63€

0

Commentaires (0)

MartinC 16/10/2018

I have bought several of these and so far they have all been reliable. I use them with usb led light bars for under cupboard lighting. they get quite warm after prolonged use at 5w output but remain reliable up to now. (about a month of every day use) will definitely order more.

UK Home Mural 3 Broches Chargeur Adaptateur Fiche à USB pour iPhone 6S ainsi que la Tablette de Smarthone

0

Commentaires (0)

MartinC 16/10/2018

this is my second batch of glue, use it for insulating electrical repairs and projects as well as general purpose hobby use. with a variable temperature gun this can be used either hot and very fluid or cooler and bulky, either way it sticks extremely well. can be rather stringy at lower temperatures but not difficult to deal with with practice.

10pcs 11mm x 247mm EVA Clear Hot Melt Glue Adhesive Sticks For Glue Gun

6,88€ 14,75€

0

Commentaires (0)

MartinC 28/06/2018

accurate and bright display. use this wiring diagram but ignore the shunt.

Double LED Rouge Bleu Ampèremètre Voltmètre Numérique Mètres de Jauge Panneau de Tension

6,92€ 8,30€

4

Commentaires (0)

MartinC 20/03/2018

Especially as these come with the appropriate spare mandrels these make a cheap way of topping up your sanding drums, far cheaper than buying locally and of comparable quality. I use these in a Dremel but I believe they will fit any similar rotary tool. My wife also uses them in her electric nail tool for when she is dealing with acrylic nails. I have bought her her own set so I don't have to keep searching for mine!

Kit de tambours de ponçage avec 102 pièces et mandrins de ponçage de 1/2, 3/8 et 1/4 de pouce pour outils rotatifs Dremel, grain 120

10,60€ 11,06€

0

Commentaires (0)

MartinC 20/03/2018

These are not very sturdy but more than adequate for small components.

5pcs Geekcreit® 24 Value Composants électroniques Boîte de rangement

21,30€ 22,13€

0

Commentaires (0)

MartinC 20/03/2018

I use these when I need to use AA or AAA batteries in 3D printed projects. More than adequate for this purpose, easy enough to include 1s,2s,3s or more cell holders in designs. I have even used them for 18650 cells in low current applications as I don't think they would be up to carrying any more current than a typical AA cell can deliver due to the thin material they are made of.

10 paires ton argent batterie métal plaque de ressort fixé pour piles aaa aa

2,76€ 3,68€

0

Commentaires (0)