hvorfordetda
mon contenu
Tous les messages
Commentaires
Commentaires
réponses
Questions

Tous les messages

hvorfordetda 01/06/2021
Appears to be OK. DC resistance close to 50 ohm.
5 pièces Y1078 50Ω Connecteur mâle BNC vers femelle prise de test haute fréquence pour sonde d'oscilloscope
18,10€ 19,36€
0
Recommandations
Commentaires (0)
MUSTOOL MT336 Pince ampèremétrique numérique 600 V True RMS avec affichage de forme d'onde AC V/A Multimètre Oscilloscope 2 en 1 Mesure de forme d'onde de courant sans contact Résistance de fréquence Test de diode de capacité
62,73€

Q: One of the pictures shows it can display the wave form of the current measured with the clamp, but the review posted by "msobejano" indicates it can only display the waveform of voltages. What is correct?

demandé par hvorfordetda sur 2020-02-28 09:07:12

ingdump It can display Amps and Volts in AC only, in DC, volts only

2021-03-26 12:25:06 Utile (1)
Soumettre
réponses (2)
hvorfordetda 24/06/2019
First impression is that this is a good product made without cutting all corners possible. Seems like the manufacturer has tried (and meant) to make something that is meant to last. Price is not cheap, but seems quite realistic for what I got. I have only started the motor, and I can confirm that it seems to be very well balanced. The attached collet is 1/8". Don't think it is mentioned in the description. Shipping protection was very good.
Contrôleur de vitesse du moteur de broche sans balais ER11 500W 48V CC pour machine CNC
128,92€ 134,69€
1
Recommandations
Commentaires (0)
hvorfordetda 16/10/2020
Happy with these. Price with rebate was very good.
Kit d'outils de changement rapide de type GIB Cuniform de Machifit 250-000 Porte-outils 250 001-010 pour les tours
17,04€ 17,52€
0
Recommandations
Commentaires (0)
hvorfordetda 16/10/2020
Seems to be good for the price.
MT2 ER16/20 M10 porte-mandrin à pince conique Morse porte-mandrin à pince de fraisage CNC arbre de coupe
13,21€ 16,60€
0
Recommandations
Commentaires (0)
hvorfordetda 16/10/2020
Seems to be good for the price.
Machifit 10 pièces ER16 1-10mm pince à ressort CNC Machine de sculpture fraisage mandrin pince outil de tour
21,30€ 22,13€
0
Recommandations
Commentaires (0)
hvorfordetda 16/10/2020
These are good. Had three of them, and bought three more.
3pcs Elfeland XPE 600LM AAA Mini Camping LED Lampe de Poche Lumière AAA
11,29€ 14,72€
0
Recommandations
Commentaires (0)
MT2 ER16/20 M10 porte-mandrin à pince conique Morse porte-mandrin à pince de fraisage CNC arbre de coupe
13,21€ 16,60€

Q: I can answer myself. The threads on the nut holding the collett is M22x1,5 on the ER16 MT2 holder. The draw bar is M10x1,5 as stated by Z.

demandé par hvorfordetda sur 2020-07-28 10:38:38
Soumettre
réponses (1)
MT2 ER16/20 M10 porte-mandrin à pince conique Morse porte-mandrin à pince de fraisage CNC arbre de coupe
13,21€ 16,60€

Q: What size is the threads for the nut on the MT2 ER16 collett? M19 x 1 or M22 x 1.5 ? Both sizes exist, so this should be stated in the description.

demandé par hvorfordetda sur 2020-06-07 11:43:04

Zosterops M10*1.5

2020-07-06 04:01:52 Utile (0)
Soumettre
réponses (1)

hvorfordetda Search eevblog dot com, and you will find some useful information about adjustment and improvements to the power supply.

BG231153916 01/02/2020
Great product for hobby work and educational purposes. It seems to work properly although seems to show ~5% higher values on both ranges than my other equipment, so could be a bit out of spec in my case. Probably can be calibrated if needed. Signal noise could be lower, but I usually take average measurements anyway, so it doesn't matter that much to me. For one shot applications, I presume it could be a bit problematic if you need to be sure what are you looking at. Haven't yet tested it at higher frequency though, but will do so, expect it to work as specified. Zeroing works great, albeit a bit fiddly. Simply the button sometimes get stuck. This is the only reason I gave it 4 stars for quality, as it could easily be solved by re-thinking the design of the physical button. Surprisingly, after proper zeroing it doesn't float that much afterwards. All in all, extremely good value. If there would be 10 for value, this product would easily get it. P.S. It can also work with UNI-T UT139C AC and DC range through a BNC to banana adapter (sold separately), just make sure to use the 1mV/100mA range on the Hantek clamp to match 10mV/A on the UT139C in case you want to use it for simple measurements.
Hantek CC65 Oscilloscope multimètre à pince ampèremétrique numérique AC/DC avec connecteur BNC
91,63€ 95,94€
0
Commentaires (2)
5.0MP USB Cmos caméra électronique microscope oculaire numérique pilote gratuit / logiciel de mesure haute résolution pour WIN10 / 7/8
63,92€ 66,42€

Q: Can I attach a C-mounth lens to this camera?

demandé par hvorfordetda sur 2020-01-23 11:59:34

wuchuangbin yes

2020-02-05 09:17:22 Utile (2)
Soumettre
réponses (1)
hvorfordetda 01/02/2020
Works OK, but could benefit from more care during manufacturing. Too many sharp edges that should have been removed before assembly given the price. It is possible to remove them by means of a 1200 grit abrasive paper. The best result will be achieved if you dismantle it. Four screws are hiding underneath the sticker with the table on the back. You can feel the holes with your finger. Both sides of the knurled screw ontop of the display, you find two small buried screws. They can benefit from some minor adjustment to thighten the sliding mechanism. If you remove them, take notice of their placement because they are slightly different. One of them is meant to fit into a small hole in the bronze leaf spring that takes up the slack. When sharp edges are removed and some minor adjustemts are taken care of, it is a quite nice caliper. Seems to be accurate and the zeroing is also OK. Nice to find extra batteries and the plastic case gives protection.
Pied à coulisse numérique en acier inoxydable de 150 mm avec écran LCD de 6 pouces fraction / mm / pouce Pied à coulisse Vernier en acier inoxydable haute précision avec écran LCD
16,60€ 27,67€
0
Recommandations
Commentaires (0)
hvorfordetda 12/01/2018
These ar not good. They lack spring tension for the shield and will give very poor connection for radio frequencies.
Excellway® 10 jeux d'adaptateurs de connecteurs à sertir BNC pour câble d'antenne mâle coaxial RG58 RG-58
18,10€ 19,36€
1
Recommandations
Commentaires (2)
hvorfordetda 17/09/2019
Product is OK, but I would like to se a larger version of it. Lenght is OK, but width could have been about 30 - 40 cm more. Some of us are not thin, you know, and sometimes this will be used together with other thick clothes as well. This kind of apron can be useful for many kinds of work in addition to welding.
Cuir de vache 60x90cm de tablier de protection d'isolation thermique de soudeur d'équipement de soudure
18,82€ 22,58€
0
Recommandations
Commentaires (0)
hvorfordetda 11/07/2019
10ml pipette is ok. 5ml pipette is ok for the glass, but the red ballon is just a joke. Does not fit the glass and is to small to suck up 5ml. Buy some of the blue ballons in addition. Loose one star because of un-necessary extra cost. Survived shipping only by pure luck. Why does the Chinese think it is smart to wrap long, thin tubes of glass in thin layer foam only?
Gouttelettes de tube de transfert de pipette en verre avec bouchon en caoutchouc à l'échelle pour laboratoire
3,64€ 5,47€
0
Recommandations
Commentaires (0)
Connecteurs pneumatiques TEVO® 5PCS avec alésage de 4,3 mm PC4-M6 pour raccord de tuyau PTFE de 4 mm. Couplage d'entrée d'alimentation
6,06€ 8,29€

Q: Do it have metal teeth on the inside to provent a good grip on the ptfe tube ?

demandé par ckiki sur 2018-11-13 04:06:20

hvorfordetda Yes, it has metal teeths inside.

2019-10-10 06:29:29 Utile (0)
Soumettre
réponses (4)
hvorfordetda 11/07/2019
Probably ok
WXD3-13-2W 10K Ohm Rotatif Multiturn Bobiné Potentiomètre
7,45€ 8,29€
0
Recommandations
Commentaires (0)
hvorfordetda 11/07/2019
These are ok
5 pièces/ensemble bleu Pipette Pipette compte-gouttes ampoule en caoutchouc poire en forme de laboratoires boule d'aspiration outils de laboratoire
12,78€ 13,83€
0
Recommandations
Commentaires (0)
hvorfordetda 26/06/2019
These are good. Small (as I need) and qite sturdy. Have been using them over long time.
50 pièces de clip pour tente de camping extérieure, pince coupe-vent de survie, outil de serrage pour auvent, pince pour bâche
8,48€ 10,24€
0
Recommandations
Commentaires (0)
hvorfordetda 23/10/2018
I can't prove they are fake, but they don't behave like any of the 14 other DS18B20 I have, two different batches of 7 each.. When I test them, it is impossible to have more than three of them connected to the same bus. I can have all of the other 14 I have one the same bus, and I can have 3 of the ones I got from Banggodd in addition. Regardless of how I connect them, I can not have more than 3 of them connected at the same time. Only 3 (no other DS18B20's) is OK, 4 or more does not work. None of the DS18B20's on the bus is recognized if I have more than 3 of this batch. I bought 10 items. Five are well within the tolerances, five are outside. All items respond as expected to 9, 10, 11 and 12 bit resoulution settings, and they remember the setting when powered off. If you need less than four items on a bus, they will probably be OK, but expect some errors i the temperature readings. I add a picture showing the face of the case and it's batch number.
10 capteurs de température DS18B20 18B20 en encapsulation TO-92
10,65€ 11,06€
0
Recommandations
Commentaires (1)

Vous êtes l'expert, pouvez-vous aider?

Nous vous invitons sincèrement à vous abonner à l'e-mail d'invitation à répondre!

Si vous vous abonnez, nous vous inviterons par e-mail à répondre aux questions des gens sur les produits. En vous abonnant, vous gagnerez également le «Badge utile»! Vous pouvez vous désinscrire à tout moment sur la page des paramètres de confidentialité.

Aidez les autres et soyez plus heureux!

  • S'abonner

À propos des badges

Les badges sont liés à la communauté et les utilisateurs le font en créant un contenu de qualité, en complétant des missions ou en participant à des activités spéciales. Les personnes spécifiques auront également leur propre badge exclusif.
Badge du PDG

L’insigne du PDG appartient uniquement au patron de Banggood.

Les badges que vous pouvez gagner arrivent bientôt
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe