Tous les messages

DGee5187 24/01/2020
6
Recommandations
Commentaires (0)

Q: what is the name of the app to control the rgb lights

demandé par linuztt sur 2021-02-25 03:33:20

DGee5187 The app is called LED DMX. It works very well.

2021-02-25 11:41:07 Utile (0)
Soumettre
réponses (2)

Q: Can you connect 2 strips together?

demandé par BG115733465 sur 2021-01-20 03:37:40

DGee5187 According to the specs, each strip is rated at 4.8 watts per meter or 400 mA. A 5M strip requires 2 amps. Using two strips would require a supply of at least 4 amps and I would use 5 amps as a minimum. Don't connect anymore than 10 meters or you risk overheating of the copper traces and dimming of the LEDs. Note that this strip uses separate red, green and blue LEDS. This means that if you want just want red, there will be two LEDS that are turned off in each section, along the length of the strip. I prefer the SMD5050 strips as each LED can be red, green or blue at the same time. In this case, each LED along the length of the strip will be red. The SMD2835 strip has separate red, green and blue LEDS spaced equally along the length. The SMD5050 strip has RGB LEDS spaced equally along the length of the strip, just to recap.

2021-01-20 02:20:24 Utile (0)
Soumettre
réponses (2)

Q: Will this fit to astrolux s43?

demandé par BG141155721 sur 2020-12-07 10:10:35

DGee5187 The difference in diameter between the two lights is only 3 mm so yes it should fit.

2020-12-08 07:48:07 Utile (0)
Soumettre
réponses (1)

Q: How does the adjustable speed work? I see no controller or gears.

demandé par henrivdr sur 2019-05-05 01:59:46

DGee5187 The speed is adjusted from the power supply input between 12 and 24 volts DC. If you watch the video clip, you will notice the speed change as he adjusts the voltage up on the adjustable power supply.

2019-08-21 03:07:23 Utile (1)
Soumettre
réponses (2)