Dr_JatinTalwar
mon contenu
Tous les messages
Commentaires
Commentaires
réponses
Questions

Tous les messages

Dr_JatinTalwar 12/09/2021
Got the product well in time , only 14 days to India . I bought the UK pin version so that I can put a Three pin converter which maintains the Earth . If you buy the Euro pin in India, it would not show earth after putting the converter and will constantly give Earth Error !!! Beware while ordering . The product is great , well designed, great finish and is high quality . First you have to install 2 AAA batteries after opening the 4 screws. This is super-easy. I installed 2 alkaline batteries for longevity. It powers on with long press of the power button. Upon checking the wall sockets , it correctly showed the voltage , also neural Earth parameters. This thing has already pointed out mistakes in couple of my wall sockets which I rectified as their Neutral and Live were reversed. The Non Contact Voltage (NCV) function works great too. I have still not used the RCD function so can't comment. I found it very helpful . Highly recommended product.
ANENG AC11 Testeur de prise à écran LED Testeur de phase multifonction Testeur de polarité de phase Mesure de tension CA 0,1V ~ 250V Identification des fils Zéro/Feu
13,37€ 21,21€
2
Recommandations
Commentaires (0)

Dr_JatinTalwar Whatare the details of incoming resistors ??

seydioglu 20/04/2021
class 978 havya koluna uygun, gelen resistansı taktım, denedim, çalıştı. Tavsiye ederim.
5pcs 24V 50W A1322 Élément chauffant en céramique de remplacement pour station de soudage
10,65€ 11,06€
1
Commentaires (1)
10m 18650 Li-ion Batterie Feuille de nickel Plaque Ceinture en acier nickelé connecteur de courroie machine à souder par points pour batteries
11,95€ 12,92€

Q: The description of A B C D dimension differs in product selection and description . Please clarify . As per product selection C is 0.12 mm whereas as per the description its 0.15. Seller to plz reply , want to buy it soon.

demandé par Dr_JatinTalwar sur 2021-09-15 12:08:39

ethss Just choose type, it will show you different sizes

2021-09-27 03:57:14 Utile (0)
Soumettre
réponses (1)
Objectif à zoom industriel HAYEAR 5X-120X pour objectif à monture C de caméra de microscope numérique avec distance de travail élevée
35,15€ 36,89€

Q: Does it have a manual Focus ring for focusing after you adjust zoom ? Also does it have the zoom ring to zoom it between 5x-120X ?

demandé par Dr_JatinTalwar sur 2021-09-25 10:55:56

The seller Hello friends, the manual focus of this product can be changed between 5X-120X

2021-09-28 05:27:25 Utile (0)
Soumettre
réponses (1)
Objectif de montage C HAYEAR Zoom 0.7X à 4.5X grossissement 25mm pour caméras de microscope vidéo industriel CCD CMOS
68,19€ 71,03€

Q: Hello , Can someone Please tell me , what is the working length of the "120X Lens" jQuery111309500352317475302_1631989450901 The 180X which i have isn't giving me enough working distance for soldering. Thanks in advance.

demandé par Dr_JatinTalwar sur 2021-09-18 01:26:03

The seller Working distance:220mm

2021-09-23 01:15:47 Utile (1)
Soumettre
réponses (1)
Contrôleur de soudeuse par points NY-D08 100A Machine de soudage pneumatique avec affichage LCD couleur Personnalisation multipoint avec capteur de température
52,20€ 54,42€

Q: What do we do by "12V solenoid valve" control here ? Is the fan automatically controlled by setting trigger temperature ?

demandé par Dr_JatinTalwar sur 2021-09-14 08:58:18

The seller The fan is not controlled by a temperature sensor.

2021-09-15 03:07:13 Utile (0)
Soumettre
réponses (1)
Contrôleur de soudeuse par points NY-D08 100A Machine de soudage pneumatique avec affichage LCD couleur Personnalisation multipoint avec capteur de température
52,20€ 54,42€

Q: Does anyone have the user manual for this ?

demandé par Dr_JatinTalwar sur 2021-09-14 08:46:51

The seller Sorry,no manual for this module.

2021-09-15 03:10:42 Utile (0)
Soumettre
réponses (1)
HAYEAR Industry Lens 8X-100X Agrandissement Réglable Objectif C-mount Zoom 25mm en Verre pour Caméra de Microscope Industriel
29,83€ 31,36€

Q: What is the working distance for this lens ? i.e the distance between PCB and the lens margin , Thanks

demandé par Dr_JatinTalwar sur 2021-08-30 10:12:29

The seller 25CM

2021-09-02 10:09:34 Utile (0)
Soumettre
réponses (1)
Objectif de montage C HAYEAR Zoom 0.7X à 4.5X grossissement 25mm pour caméras de microscope vidéo industriel CCD CMOS
68,19€ 71,03€

Q: Is the 120X version not available now ?

demandé par BG101163880 sur 2021-08-30 09:45:37

The seller Hello friends, there is currently no inventory of 120X, we will replenish the inventory as soon as possible

2021-09-02 10:01:22 Utile (0)
Soumettre
réponses (1)
Objectif à zoom industriel HAYEAR 5X-120X pour objectif à monture C de caméra de microscope numérique avec distance de travail élevée
35,15€ 36,89€

Q: what is the diameter of the c-mount?

demandé par BG403850255 sur 2021-07-06 05:59:08

BG101163880 Its written "25mm" in the description images.

2021-08-30 09:41:21 Utile (1)
Soumettre
réponses (1)
Objectif de montage C HAYEAR Zoom 0.7X à 4.5X grossissement 25mm pour caméras de microscope vidéo industriel CCD CMOS
68,19€ 71,03€

Q: Is the 300X the widest angle lens

demandé par BG225017531 sur 2021-06-22 03:22:55

BG101163880 300X is not the widest, Widest angle means the zoom range or magnigication is less. Out of these 120 X is the widest. For example out of zoom values of lenses ,a 50 mm lens is wider than 100 mm. Hope it helps

2021-08-10 10:44:09 Utile (1)
Soumettre
réponses (1)
BG101163880 21/07/2021
Good quality , Its just i have still not understood what type of dye to be used for different types of ferrules/ pins. There is a small printed paper which shows this but it will take some time to get used to it . All in all , good quality stuff, came in time , box quality is quite acceptable . Also has a screw driver with hexagonal tip on one side and star tip on other side for assembly and disassembly. Nice buy , can comfortably go for it .
Paron® JX-D5 Pince à Sertir à Cliquet Multifonctions à Dénuder Kit de Pinces à Bornes
39,41€ 41,51€
0
Recommandations
Commentaires (0)
BG101163880 21/07/2021
Have installed it in my Weber Grill after drilling the required sized hole. Quality wise its acceptable to me . Though i feel that it should have rounded tapering ends like the original weber gauge. That would seat well with the metal body of the grill ,. here it protrudes above the level distinctly . Had to add an extra washer on the underside for it to tighten well. Overall well priced and fulfills its purpose adequately. A good addition to you existing grill to upgrade it . Can comfortably go for it .
Thermomètre de température de 100 à 550℉ pour barbecue, grill, fumoir
9,58€ 10,14€
0
Recommandations
Commentaires (0)
BG101163880 29/03/2021
WoW Stick is actually a wow.... The driver is a very high quality and engineered machine . The torque is good enough to open and tighten screws from electronic gadgets like laptop on which i have already tried it . For final tightening the driver can be simply used as a manual driver with its motor off. Small LED's around the tip of the driver helps to illuminate the site of working. The drill bits are very good in quality and precision. I am sure , they would suffice for most of the application in electronics. The containers are very carefully designed and helps to store them. I have still not tested its battery life , so cannot comment. The case, magnetic strip, screw holder are very good in quality and functionality . Out of the whole stuff , i am only not sure about whether the de-magnetizer works after magnetizing the bit./ Or maybe i am not using it correctly , this being not a very big issue. All in all , a highly recommended product. Justifies its price. and very very useful. You will love owning it for sure. Go for it !!!
Xiaomi Wowstick 1F+ 64 en 1 Tournevis électrique de haute précision avec chargement USB, éclairage LED et 56 embouts en acier allié. Idéal pour les bricolages et les réparations à domicile.
39,66€ 73,80€
0
Recommandations
Commentaires (0)
10 embouts de forage en alliage dur en acier tungstène Drillpro DB-P1 pour circuits imprimés PCB
7,42€ 10,14€

Q: Can these bits MILL hole in pcb?

demandé par souravg009 sur 2018-10-03 01:01:56

BG101163880 Yes, they are meant for that only

2020-06-02 12:11:03 Utile (0)
Soumettre
réponses (3)
BG101163880 16/03/2020
Very useful component of your armentarium in PCB making . Sharp and strong . I just wish the laser markings for size were dark and clearly visible . I would have preferred the size to be printed on the colored stoppers. I am sure there are very few who remembers the size with its color coding .
10 embouts de forage en alliage dur en acier tungstène Drillpro DB-P1 pour circuits imprimés PCB
7,42€ 10,14€
0
Recommandations
Commentaires (0)

Vous êtes l'expert, pouvez-vous aider?

Nous vous invitons sincèrement à vous abonner à l'e-mail d'invitation à répondre!

Si vous vous abonnez, nous vous inviterons par e-mail à répondre aux questions des gens sur les produits. En vous abonnant, vous gagnerez également le «Badge utile»! Vous pouvez vous désinscrire à tout moment sur la page des paramètres de confidentialité.

Aidez les autres et soyez plus heureux!

  • S'abonner

À propos des badges

Les badges sont liés à la communauté et les utilisateurs le font en créant un contenu de qualité, en complétant des missions ou en participant à des activités spéciales. Les personnes spécifiques auront également leur propre badge exclusif.
Badge du PDG

L’insigne du PDG appartient uniquement au patron de Banggood.

Les badges que vous pouvez gagner arrivent bientôt
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe