BG445364424
mon contenu
Tous les messages
Commentaires
Commentaires
réponses
Questions

Tous les messages

BG445364424 13/08/2023
Arrived on time, partially charged. They were easy to fully charge and work as expected in a couple of torches and hand-held lasers. Have not taken the time to test the mAh rating.
2PCS 3.7V 5200mAh Batterie rechargeable protégée Li-ion 18650 pour le contrôleur radio RadioMaster Pocket Radio Transmitter
9,68€ 9,22€
0
Recommandations
Commentaires (0)
BG445364424 23/08/2020
Great little project for someone with a little experience since there were no directions. Works well and it just needs a good power supply. It was interesting that the LED frequency display shuts off after a few seconds, but it keeps the last tuned frequency when turned on and off with the switch. Would like to see a slightly better connection for the whip antenna for FM.
TEA5767 DC 4.5V-5.5V bricolage Mini Radio FM numérique 87MHZ-108MHZ 2W 8ohm Kit électronique de haut-parleur
12,75€ 22,07€
1
Recommandations
Commentaires (0)
BG445364424 24/09/2020
This DIY FM radio using the TDA5807 and LCD display has a much cleaner sound than the designs using the TEA5767. It does have digital controls for the volume where the lowest level, 0, is still audible. Like other FM kits, it only stops when it scans and detects a strong signal, so weaker stations may be missed. Increasing the volume allows the lights across the top to light up, and if sufficiently loud, the centre ones will start to change colour (curious when the installed LEDs are just two pins). Some written directions might have been helpful. To help secure the antenna, which was threaded, I used a M2x8mm bolt. The three lengths of bolts was a little confusing about where they should be used. In some places, I actually replaced the metal bolts with M3 x 12 mm nylon bolts. A headphone jack might be a nice addition.
Geekcreit® DIY Radio Electronic Kit Parts 51 Machine de son numérique FM à puce unique
21,21€ 22,13€
8
Recommandations
Commentaires (1)
BG445364424 29/09/2020
Seems to work as expected. The knob to adjust the voltage is a little hard to turn, and getting the voltage set to exactly 5.0, 6.0, etc, took a little patience. It was used to power a small kit radio and did not seem to affect the radio signals. It came with an adapter to convert the European plug to the local style plugs. It has only been tested for low power loads, so cannot comment on how much current it can produce.
KJS-1509 3-12V 5A Adaptateur secteur Adaptateur de tension réglable LED Affichage Alimentation à découpage
17,04€ 22,13€
0
Recommandations
Commentaires (0)
Kit d'imprimante 3D améliorée Creality 3D® Ender-3 V2 Taille d'impression 220x220x250mm Carte mère 32 bits ultra-silencieuse TMC2208/ Plate-forme en verre de carborundum/ Alimentation Mean Well/ Nouvel écran couleur 4,3 pouces
349,05€ 303,52€

Q: Can I print from PETG on this printer?

demandé par BG114738323 sur 2020-09-22 02:16:51

BG445364424 TheEnder 3 v2 is able to print with PLA, ABS, PETG and TPU. At this point I have only used PLA, but I hope to print with some PETG when I get some filament.

2020-09-25 04:40:18 Utile (0)
Soumettre
réponses (4)
BG445364424 24/09/2020
Gift for a friend who like to work with Arduino, so hopefully he can work out how to control this and make it into a radio project.
TEA5767 FM Stéréo Radio Module 76-108MHZ pour Arduino avec Antenne
13,84€ 14,75€
0
Recommandations
Commentaires (0)
BG445364424 24/09/2020
Batteries arrived on time, come in a nice little plastic case, and seem to work well.
4PCS SORBO Batterie AA Li-po rechargeable 1,5V 1200mAh avec recharge rapide en 1 heure via USB
23,33€ 27,67€
0
Recommandations
Commentaires (0)
BG445364424 24/09/2020
One USB A to four USB micro - very useful.
Câble de chargement micro USB ZNTER pour batterie rechargeable USB
7,45€ 8,29€
0
Recommandations
Commentaires (0)
BG445364424 24/09/2020
Love this little soap foam dispenser. Just make sure you use foaming soap refill. The smiling face that flashes for ten seconds is a great reminder to rub your hands together longer and it helps light up the sink at night.
[Version optimisée] Xiaowei 250ML Capteur intelligent Distributeur de savon moussant liquide à induction automatique Capteur infrarouge Équipement moussant
24,51€ 24,91€
0
Recommandations
Commentaires (0)
BG445364424 24/09/2020
This project went together rather easily (no directions, just pictures on the website), and seems to work well after some initial testing.
DIY AC 220V à DC 1.25V-12V LM317 Kit de module d'alimentation réglable avec boîtier
12,72€ 14,75€
0
Recommandations
Commentaires (0)
BG445364424 24/09/2020
Putting in all of the LEDs took some time, but the rest of the assembly went very smoothly and quickly. Now I just need to work on getting the settings worked out. After about 15 seconds the display scrolls to show other information such as the temperature, date and alarm setting.
Geekcreit® Quatrième Génération DIY EC1838B DS3231 Contrôle de la Lumière Rotation LED Kit Horloge Électronique Réveil Musique Avec Boîtier
15,49€ 17,52€
0
Recommandations
Commentaires (0)
BG445364424 16/09/2020
What arrived was a different brand but marked 600 mAh and charged and ready to use. Seem to do the job after an initial check.
Batterie lithium-polymère rechargeable USB ZNTER S19 9V 600mAh 9V
17,04€ 18,44€
0
Recommandations
Commentaires (0)
BG445364424 07/09/2020
Works well for surface mount components when you only need small amounts of solder.
0.4mm 63/37 fil à souder étain plomb colophane fil à souder 2% tube de bobine de flux
9,58€ 10,14€
0
Recommandations
Commentaires (0)
BG445364424 07/09/2020
It took some effort to do the initial levelling of the print bed, but otherwise it seems to print very well and is quiet when printing (other than the fan). Only tried PLA at this point.
Kit d'imprimante 3D améliorée Creality 3D® Ender-3 V2 Taille d'impression 220x220x250mm Carte mère 32 bits ultra-silencieuse TMC2208/ Plate-forme en verre de carborundum/ Alimentation Mean Well/ Nouvel écran couleur 4,3 pouces
349,05€ 303,52€
0
Recommandations
Commentaires (0)
BG445364424 07/09/2020
Other than one tiny surface mount component, this is a great little FM radio and pretty easy to solder together. Not sure why, but the one I ordered did not have a battery, but I bought version #1 and there are three other versions that can be purchased.
Kit électronique DIY Rechargeable FM Stéréo Numérique Radio DIY Pièces
15,97€ 11,98€
0
Recommandations
Commentaires (0)
BG445364424 07/09/2020
Amazing reception for a small hand-held radio. Shows the temperature, lets you select rechargeable or non-rechargeable batteries. Easy to program. Just wish I had an English version of the user manual (but it was relatively easy to find online).
TECSUN PL360 Portable AM ​​FM ondes courtes PLL DSP ETM SW MW LW Récepteur radio numérique de poche
72,46€ 70,11€
0
Recommandations
Commentaires (0)
BG445364424 25/08/2020
This was a challenging radio to assemble and tune, but was functional in the end. The fit of the molded plastic parts could be improved.
Diy portable am fm kit radio 76-108mhz 525-1605khz approprié pour l'enseignement et l'apprentissage électronique
6,45€ 9,22€
0
Recommandations
Commentaires (0)
BG445364424 25/08/2020
Package arrived on time, but I haven't had time to use the product yet.
Pâte à souder KSS S800 10CC pour la pose de SMD Bga sur fils
12,83€ 14,75€
0
Recommandations
Commentaires (0)
BG445364424 23/08/2020
Very challenging to assemble without instructions. Still not sure if the tuning mechanism for the display is assembled correctly and if the filter components (3-pin and 2-pin) are installed correctly on the circuit board. Currently it picks up some FM stations and only one AM station which is unusual for this area. Shortwave broadcasts are limited in this area and I don't have an external antenna to assist with SW reception. One really great thing with this radio is the connection to the batteries because the spring terminals mount directly and securely to the circuit board. Unfortunately, the battery compartment seems to open at the wrong end. It is nice to have a headphone output and input for external power. The radio seems to have potential but mine still has lots of issues.
DIY EDT-2902 Kit radio multibande Kit de formation à la production électronique
13,83€ 19,36€
0
Recommandations
Commentaires (0)
BG445364424 23/08/2020
Nice little AM radio kit with reasonable reception. Probably just needs to be tuned better to improve reception. No earphone connector, so just a small speaker for sound. Curious location for batteries next to the speaker so they are attracted to
Seven AM DIY Radio Kit d'Apprentissage Électronique
6,97€ 8,36€
0
Recommandations
Commentaires (0)

Vous êtes l'expert, pouvez-vous aider?

Nous vous invitons sincèrement à vous abonner à l'e-mail d'invitation à répondre!

Si vous vous abonnez, nous vous inviterons par e-mail à répondre aux questions des gens sur les produits. En vous abonnant, vous gagnerez également le «Badge utile»! Vous pouvez vous désinscrire à tout moment sur la page des paramètres de confidentialité.

Aidez les autres et soyez plus heureux!

  • S'abonner

À propos des badges

Les badges sont liés à la communauté et les utilisateurs le font en créant un contenu de qualité, en complétant des missions ou en participant à des activités spéciales. Les personnes spécifiques auront également leur propre badge exclusif.
Badge du PDG

L’insigne du PDG appartient uniquement au patron de Banggood.

Les badges que vous pouvez gagner arrivent bientôt
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe