Meilleures offres pour Souris aérienne - Banggood France Achats en ligne

chenzo

mon contenu: Tous les messages; Commentaires; Commentaires; réponses; Questions

Tous les messages

chenzo 22/01/2021

I have had this light installed for a few weeks now, and it has been exposed to rain on a few occasions. The light continues to work very well. The sensor is excellent easily sensing people from a minimum of 5m away. It is now summer for me, and the solar cells receive minimum of 8 hours of strong sunlight. The lights do not get used very much, so I'm not sure how the light will work in winter time when there is less sunlight for charging. In the photos you will notice that the light has a rubber seal, and the solar panel does not have a seal. You can see for the light and the solar panel there is no evidence of water penetration, so I would say these are both waterproof. I have a photo of the screws and some have some surface rust, but still function ok. You can also see from the photos how bright the light is. I don't think it is 600 lumans, but it lights up an areas 5m x 5m with no problem. It is adequate for my application. The lithium battery is 3.7V. The specifications say the light is 30W. That means the battery will need to supply about 8 Amps. I don't think this type of battery can supply 8 Amps, so I don't believe the light is 30W. However, as the photos show it lights an area 5m x 5m no problem. This is a great product, and I hope it lasts many years. I will see how well the plastic casing resists the UV sunlight.

COB 100LED Lumière 30W 600Lumen IP65 Lampe Solaire Extérieure Parc Cour Jardin Lumière de Camping Lumière de Travail

12,33€ 18,75€

42

Commentaires (5)

chenzo 22/01/2021

In the few weeks the solar panel has been installed it has been exposed to rain on a few occasions. The light is installed under cover, away from the rain. The light continues to work very well. The sensor is excellent easily sensing people from a minimum of 2m away. The light do not get used very much, so I'm not sure how the light will work in winter time when there is less sunlight for charging. Currently it is summer, and there is plenty of sunlight for charging. In the photos you will notice that the light has a rubber seal, and the solar panel does not have a seal. You can see for the solar panel there is no evidence of water penetration, so I would say that it is waterproof. You can also see from the photos how bright the light is. I don't think it is 600 lumens, but it lights up an areas 1.2m x 10m with no problem. It is adequate for my application. The lithium battery is 3.7V. The specifications say the light is 30W. That means the battery will need to supply about 8 Amps. I don't think this type of battery can supply 8 Amps, so I don't believe the light is 30W. However, as the photos show it lights an area no problem.

COB 100LED Lumière 30W 600Lumen IP65 Lampe Solaire Extérieure Parc Cour Jardin Lumière de Camping Lumière de Travail

12,33€ 18,75€

2

Commentaires (0)

chenzo 09/05/2021

Items received as described. But, the packaging arrive damaged. There was no damage to the product, and all work ok. I'm unsure if the packaging was damaged from the factory or during transport/delivery. I could not tell if the packaging was damaged until I remove the products from the parcel. These are the water proof version. I have purchased other no-name brand of the same looking product and they were not water proof. These lights are not 30W. They are more like 6W, but they are bright enough to light up an area 5m by 5m to safely walk and carry out simple jobs under the light. They are perfect for lighting up the area in front of a gate or small courtyard area. I have also used these lights for inside my garage. The solar charging works great. The sensor is quite sensitive. I am very happy with this product. I have purchased 5 of them. What best is that it consumes no electricity. There is provision to add an additional lithium 18650 battery to make the light last longer. This may be particularly good during winter months when there is less sunshine to charge the battery. But, if the light does not get used much there is no need for an extra battery.

COB 100LED Lumière 30W 600Lumen IP65 Lampe Solaire Extérieure Parc Cour Jardin Lumière de Camping Lumière de Travail

12,33€ 18,75€

10

Commentaires (1)

chenzo 09/05/2021

This is the second one I have purchased. It works perfectly. Great to use to control your Android TV box and streaming services. Easily charges with USB mini cable. Lasts for several weeks with regular use. Led lights flash to indicate the remote needs charging. Great product Banggood. Thank you.

Wechip W1 Souris Senza Fili 2.4g Air Mouse Par Box Android / Mini PC / Télévision / Win 10

23,44€ 28,13€

1

Commentaires (1)

chenzo 09/05/2021

Product arrived as described. Packaged very well. No damage to product. I purchased this item specifically to convert 1 side of my Mankati 3D printer to print with 1.75mm flex filament. Now I can print with 3mm and 1.75mm filament. The extruder mounts perfectly to a nema 17 stepper motor. This extruder can work with flexible filament. When I first used it I had to change the e-steps value. Because this item is transparent it helps to see any problems. When I tried my first print the flexible filament was escaping between the rollers. After some trial and error I found that the original spring is too strong/stiff. NOTE: IF YOU WANT TO PRINT WITH FLEX FILAMENT YOU WILL NEED TO CHANGE THE SPRING. I used 2 springs from a bicycle quick-release skewer. These springs have much less strength than original spring. See photos. These worked perfectly. After some tuning of print speed and flow the print quality is excellent. Using the existing spring I expect that this extruder will work very well. I will continue to use the extruder with the new springs. Banggood, I would recommend you supply a weaker spring; maybe half the strength would be ok.

Extrudeuse TWO TREES® DDB Version transparente Extrudeuse à double entraînement pour imprimante 3D

18,33€ 19,69€

5

Commentaires (0)

chenzo 09/05/2021

Product arrived as described. Product is packaged very well. Quality seems very good. Some swarf found in-between the fins, but is easily removed. Not a real problem. The threads on either end are formed very well. No damage. I have purchased this as a spare part. I haven't used it yet. See photos for visual details of the product. I gave this 4 stars only because I haven't used it to check the performance.

Radiateur dissipateur de chaleur à distance en aluminium V6 Bowden avec tête J de 4,1 mm pour extrudeur d'imprimante 3D

7,57€ 8,43€

5

Commentaires (0)

chenzo 09/01/2021

Great sounding earpods. Excellent quality for listening to music and audio. Audio quality not as good for phone conversations. Sound is a bit muffled. Can is very compact, has a USB-C charging port at the bottom. But, earpods can be a bit difficult to remove from the case. Considering the price and quality this is not a problem. Touch control works great, but can take a few attempts to get used to it and learn the functions. Again, this is not a problem. Thank you Banggood. Great product.

NEW Lenovo LP1 TWS bluetooth Earbuds IPX4 Waterproof Sport Headset Noise Cancelling HIFI Bass Headphone with Mic Type-C Mise en charge

27,07€ 31,88€

7

Commentaires (0)

Extrudeuse Titan d'imprimante 3D améliorée + Kits de moteur pas à pas Nema17 pour V6 Filament Bowden 1.75mm à tête en J avec rapport de pilote Hotend 3: 1

23,83€ 20,27€

Q: What is the model number of the stepper motor?

demandé par chenzo sur 2021-03-23 05:06:50

Mrmartinc 34mm Nema 17 Stepper Motor

2021-04-06 06:19:43 Utile

Soumettre

réponses (1)

Extrudeuse Titan d'imprimante 3D améliorée + Kits de moteur pas à pas Nema17 pour V6 Filament Bowden 1.75mm à tête en J avec rapport de pilote Hotend 3: 1

23,83€ 20,27€

Q: Can the stepper motor work with 24V supply?

demandé par chenzo sur 2021-03-23 05:07:20

2021-04-06 06:19:38 Utile (1)

Soumettre

réponses (1)

chenzo 09/01/2021

Easy to use. I am using this on and Android TV box. Plug in the receiver into a spare USB port and no set up required. The product came already charged and worked right out of the box. Keyboard function work great. I have not tried the IR programming function yet. I don't need it at the moment. Thank you Banggood. Great product.

Wechip W1 Souris Senza Fili 2.4g Air Mouse Par Box Android / Mini PC / Télévision / Win 10

23,44€ 28,13€

4

Commentaires (1)

chenzo 22/01/2021

Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or replacement screws for other small projects. These are not stainless steel though. Check the label in the photo.

Suleve M2SP2 800Pcs M2 Kit de assortiment de vis autotaraudeuses à tête cylindrique cruciforme Phillips en acier inoxydable 4-20mm

11,90€ 13,12€

1

Commentaires (0)

Lampe de jardin solaire 30 W COB 100LED avec capteur PIR, étanche IP65, pour l'extérieur, la rue, le jardin, la cour, le camping et la lumière de projecteur

24,38€ 30,00€

Q: The photos of the product in the listing are not correct. The actual product has an on/off button, and the light does not have a rubber seal to make it waterproof. The photos are of the IPree product. When will you upload the correct product images for this product?

demandé par chenzo sur 2021-01-22 04:28:54

Soumettre

réponses (1)

chenzo 22/01/2021

Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or replacement screws for other small projects.

Suleve ™ M3CP1 500Pcs Vis M3 Phillips Kit d'assortiment de vis à bois à tête cylindrique en acier au carbone zinguée noire

11,90€ 13,12€

0

Commentaires (0)

chenzo 22/01/2021

Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or other projects.

Suleve ™ M3SP3 200 pièces M3 304 en acier inoxydable Phillips Pan / tête plate Kit d'assortiment de vis à bois autotaraudeuses

8,43€ 12,18€

0

Commentaires (0)

chenzo 22/01/2021

Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or other smaller projects. I don't these are stainless steel though. See the label on the photo.

Suleve M2SP3 800Pcs M2 Vis à tête plate cruciforme en acier inoxydable Kit d'assortiment de vis autotaraudeuses

12,99€ 14,06€

0

Commentaires (0)

chenzo 22/01/2021

Fast delivery. Well packaged. These will be great for 3D printed casings for my electronic projects or replacement screws for glasses etc. Thank you Banggood.

Kit de mini vis électroniques à tête ronde en acier au carbone Suleve ™ MXCP4 1000Pcs M1 M1.2 M1.4 M1.7

12,99€ 14,06€

0

Commentaires (0)

chenzo 09/01/2021

Product looks like excellent quality. All seem in working condition. Item received as advertised. Thank you Banggood.

5pcs USB à DIP tête femelle Mini-5P Patch à DIP carte adaptateur 2,54 mm

6,49€ 7,49€

1

Commentaires (0)

chenzo 09/01/2021

I used this bearing to convert my existing bearing for diameter 3mm filament to diameter 1.75mm filament. It fits and works perfectly. Thank you Banggood.

Roulement de poulie à gorge en U Anet® U604ZZ pour pièces de courroie de synchronisation d'extrudeuse d'imprimante 3D

6,49€ 7,49€

0

Commentaires (0)

chenzo 09/01/2021

I used this bearing to convert my existing bearing for diameter 3mm filament to diameter 1.75mm filament. It fits and works perfectly. Thank you Banggood.

Buse d'extrudeuse TRONXY® V6 0.2 / 0.3 / 0.4 / 0.5 / 0.6 / 0.8mm en laiton avec filetage M6 pour pièces d'imprimante 3D

6,49€ 7,49€

0

Commentaires (0)

chenzo 08/03/2020

The watch arrived on time and as expected, and in excellent condition. It seems to function very well, but I'm not sure about the accuracy of the blood pressure monitor. Other functions seems fine though. The phone app seems to function quite well and is easy enough to use. It's easy to connect the watch to the app. The watch does what it was designed to do, and is great for the price point.

Montre intelligente Goral S5 au design élégant avec écran couleur, messages visibles, rappel et lampe de respiration intelligente

16,67€ 25,31€

0

Commentaires (0)