Tous les messages

Q: Hola se puede usar con un puente h y baterias 18650?

demandé par BG425444512 sur 2020-08-19 09:07:56

gmeunier Sì : usar 2x 3.7v baterias = 7.4V (bien!)

2020-08-19 10:14:12 Utile (1)
Soumettre
réponses (3)

Q: Does it work with 2s lipo?

demandé par BG443716541 sur 2020-06-16 03:25:06

gmeunier yes it does work with 2S lipos. There are three scales to support anywhere between 1S and 5S. I don't think it supports 6S.

2020-06-17 06:12:06 Utile (1)
Soumettre
réponses (3)

Q: 4 bladed props for this model please?

demandé par kileak sur 2020-05-05 09:49:11

gmeunier You can use the 4-bladed props from the Eachine E010. Search for this item: Eachine E010 E010C E010S E013 RC Quadcopter Spares Parts Blades

2020-05-05 11:08:40 Utile (0)
Soumettre
réponses (3)

Q: can I use this motor for plane

demandé par rohitkumarcool6 sur 2018-09-06 11:50:20

gmeunier Not recommended! You are much better with an out runner motor for airplane. (Car motors are in-runners)

2020-04-30 06:35:37 Utile (0)
Soumettre
réponses (2)

Q: Is the VTX antenna on this RHCP or LHCP?

demandé par Ben Hutchings sur 2020-03-16 03:38:57

gmeunier Neither Rh or LH. It’s a whip antenna, so not polarized. You can use any antenna on your goggles.

2020-03-16 05:08:57 Utile (0)
Soumettre
réponses (1)

gmeunier Hi, I have a few Tattu 1550’s which are the same size as your RDQ pack and the 86mm tube works fine. The tube is 86mm wide when folded flat. I hope this helps!

2020-01-13 06:07:38 Utile (0)
Soumettre
réponses (1)

Q: Have you tried this with Nissan Leaf and LeafSpy app?

demandé par gmeunier sur 2019-10-04 11:22:33

xiangjinhua I have not tried it, but it works for Nissan.

2019-11-05 04:19:31 Utile (0)
Soumettre
réponses (1)

Q: Have you tried this with Nissan Leaf and LeafSpy app?

demandé par gmeunier sur 2019-10-04 11:22:58

xiangjinhua I have not tried it, but it works for Nissan.

2019-11-05 04:19:10 Utile (0)
Soumettre
réponses (1)

gmeunier Itsounds like you need to use the "Impusle RC Driver Fixer". Most win-10 PC's need it...

2019-08-25 05:46:03 Utile (0)
Soumettre
réponses (1)

Q: would they fit on the Happymodel Larva- X?

demandé par Quadnerd sur 2019-08-25 01:19:54

gmeunier Yesthis prop is compatible with the Happymodel Larva- X. However, two screws are required on each prop and the length may not be the same... The Genfan prop requires a pair of M2x7mm screws. As with most brushless motors, going with longer screws represents a risk of damaging the motor windings...

2019-08-25 05:43:14 Utile (0)
Soumettre
réponses (1)

gmeunier It's1S only as far as I know... I don't think that the included ESC's can handle 2S voltage.

2019-08-25 05:36:21 Utile (0)
Soumettre
réponses (1)

Q: will this fit 2010 subaru forester???

demandé par gmeunier sur 2018-11-28 02:07:05

medggomez ok,Thank you. Mr. Guillermo Antonio. Spain.

2019-08-25 04:36:24 Utile (0)
Soumettre
réponses (1)
gmeunier 2019-03-11 11:13:57
0
Recommandations
Commentaires (0)

Les meilleurs critiques que vous pourriez aimer:

gmeunier 2019-03-11 11:14:01
0
Recommandations
Commentaires (0)

Les meilleurs critiques que vous pourriez aimer: