DroneMapper
mon contenu
Tous les messages
Commentaires
Commentaires
réponses
Questions

Tous les messages

DroneMapper 11/01/2018
no problem with range. got smart audio with Omnibus F4 FC. I use the 5V BEC onboard to power my FC with no problem of overheating.
EWRF E709TM3 5.8G 48CH 25mW 200mW 600mW Réglable AV Transmetteur w/ Trou de Montage for Contrôleur de Vol
US$16.60 US$18.08
1
Recommandations
Commentaires (0)
DroneMapper 23/10/2018
Great value for a great frame. Carbon was very clean. frame feels solid. very easy to assemble. Just enough space for a micro camera. the fuselage is shorter than the flosstyle's. the standoffs are 20mm which gave me enough room for a stack of three 30.5x30.5 boards (AIO ESC, FC, and VTX). Had it in a couple of average crashes with no damage, not sure what will happen in a bad crash. The pdb is a great add-in; already used it in another project. BEWARE: you can't use the 20x20 holes in the back as they're blocked by the arms.
URUAV CX240 240mm 5 pouces Kit Cadre en Fibre de Carbone 5mm Epaisseur Bras W / Matek PDB-XT60 pour RC Drone
US$30.33 US$36.39
2
Recommandations
Commentaires (0)
DroneMapper 16/10/2018
the tips melted when in use, didn't even touch the soldering iron.
Brucelles antistatiques en acier inoxydable Brucelles pointues non conductrices
US$8.07 US$8.99
0
Recommandations
Commentaires (1)
DroneMapper 16/10/2018
tough
Suleve™ M3CH5 M3 Acier Au Carbone Allen Bolt 4-25mm Kit d'Assortiment de Vis à Tête Hexagonale 125pcs
US$13.85 US$14.99
0
Recommandations
Commentaires (0)
DroneMapper 16/10/2018
Banggood sent an expired item but it's ok. I thought the plunger comes with it but no. I just scoop some amounts out of the backend for soldering. It does help with soldering.
Pâte à souder KSS S800 10CC pour la pose de SMD Bga sur fils
US$13.91 US$15.99
0
Recommandations
Commentaires (1)
DroneMapper 16/10/2018
these are stiffer than dal props so they break easier but bend less in crashes. as long as you crash on grass they're ok, but once you hit concrete/asphalt they disintegrate easily. they feel more flowy and smooth than three bladed props for both fpv and los.
10 Paires Racerstar 5040 4 Lames FPV Racing Hélice 5.0mm Trou de Montage pour FPV Cadre de Course
US$6.37 US$8.00
0
Recommandations
Commentaires (0)
DroneMapper 16/10/2018
got these on sale for a good price.
Moteur brushless Racerstar Racing Edition 2306 BR2306S 2700KV 2-4S pour X210 X220 250 RC Drone FPV Racing
US$13.79 US$19.99
0
Recommandations
Commentaires (0)
DroneMapper 16/10/2018
got these on sale.
Moteur brushless Racerstar Racing Edition 2306 BR2306S 2700KV 2-4S pour X210 X220 250 RC Drone FPV Racing
US$13.79 US$19.99
0
Recommandations
Commentaires (0)
DroneMapper 03/04/2018
Durable. grreat for free style.
Gemfan Windancer 5042 Hélice PC 3 pales de 5x4,2 pouces Trou de montage de 5 mm 2 CW et 2 CCW pour Drone RC FPV Racing
US$6.60 US$7.99
0
Recommandations
Commentaires (0)
DroneMapper 03/04/2018
solid build, I like the closed bottoms as they prevent dirt and gaungue getting into the motors. wish they had screws at the bottom instead of the C-clips
Moteur brushless Racerstar Racing Edition 2306 BR2306S 2700KV 2-4S pour X210 X220 250 RC Drone FPV Racing
US$13.79 US$19.99
0
Recommandations
Commentaires (0)
DroneMapper 03/04/2018
One of the best antennas for close-range racing and free styling practice. tested it till about 200m with ok reception; doesn't do well in treed areas. with stood many crashes.
Original MMCX 5.8GHG 3dBi FPV Antenne pour PandaRC VT5804 VT5804PRO VT5804V2
US$2.56 US$3.16
0
Recommandations
Commentaires (0)
DroneMapper 03/04/2018
easy to mount. This vtx uses TRAMP protocol instead of smart audio.
VTX5848 LITE 48CH 5.8G 25/100/200/400/600mW Commutable FPV Drone RC VTX Transmetteur Vidéo Module OSD Contrôle
US$21.61 US$25.70
3
Recommandations
Commentaires (1)
DroneMapper 03/04/2018
good picture. feels solid. I believe 3D printed mounting solutions are best for these cameras ( check pic ).
Caddx Turbo Micro F1 1/3
US$17.99
0
Recommandations
Commentaires (0)
DroneMapper 03/04/2018
pros: easy to put together. light, roughly 88g fully assembled. i have 2306 motors on it, top mounted battery, 35A AIO ESC and it flew great with pitch/roll locked in. no vibrations into the FC but i also have it soft mounted. caveats: the motor holes on the end of the arms are a bit tight, but work ok. I had the bottom plate stacked on top of th e arms and the cross-brace on the bottom to increase the stack height. this way I managed to have a three board stack with good clearance for wires, ventilation, and bat strap on top. use a mini/micro camera on this frame; there's really no space for full size cameras here. I'm guessing the arms will snap after a hard crash at the weak point which is where they attach to the bottom plate. buyer be ware.
A-MAX X215 215mm Empattement 4mm Bras Cadre En Fiber De Carbone Kit 89g pour RC Drone FPV Racing
US$32.99
0
Recommandations
Commentaires (0)
DroneMapper 03/04/2018
Durable great for free style practice.
2 Paires Dalprop Cyclone T5050C 5X5 CW CCW Hélice à 3-lames 5mm Trou de Montage
US$3.08 US$3.99
0
Recommandations
Commentaires (0)
DroneMapper 03/04/2018
Great reception: tested it to about 500m with no issues. durable: withstood a few crashes so far. flexible: as seen in the pic
Realacc UXII 5.8G 1.6dBi MMCX-Droite / MMCX-90 Degrés RHCP TX RX FPV Antenne pour RC Drone
US$7.90 US$17.04
0
Recommandations
Commentaires (0)
Connecteur de fiche et câbles de fil 6 broches Mini Micro JST 1.5mm ZH de Excellway® 15cm 10 ensemble
US$13.64 US$16.99

Q: Is this soft wire/insulation?

demandé par 1337flite sur 2017-11-06 03:49:48

DroneMapper no it's not the soft insulation.

2018-03-15 01:24:30 Utile (0)
Soumettre
réponses (2)
DroneMapper 09/02/2018
Tried these on a 2205 motors LOS light weight build over grassy areas, and they took some beating well. they're lesser quality than Dal-cyclones, but they're ok for a basher. much better than kingkong's. they are light, flexible, low noise, and balanced.
10 paires d'hélices GEPRC 5040 V2 5 pouces à 3 pales de couleur transparente pour drone de course RC Multirotor FPV
US$10.34 US$17.98
0
Recommandations
Commentaires (0)
DroneMapper 09/02/2018
Got these on sale; can't go wrong with such a deal. shipping was three weeks to Canada. good packaging. comes with all the relevant sizes for the hobby.
Sulève™ M3NH1 M3 Nylon Vis Noir Hex Vis Écrou Nylon PCB Standoff Assortiment Kit 300pcs
US$12.69 US$13.99
0
Recommandations
Commentaires (0)
DroneMapper 11/01/2018
great for racing and free style practice. Signal reception is clean.
Realacc RHCP Super Mini UXII Stubby 5.8GHz 1.6dBi Antenne pour TX RX Fatshark Lunettes RC Drône
US$18.47 US$19.19
0
Recommandations
Commentaires (0)

Vous êtes l'expert, pouvez-vous aider?

Nous vous invitons sincèrement à vous abonner à l'e-mail d'invitation à répondre!

Si vous vous abonnez, nous vous inviterons par e-mail à répondre aux questions des gens sur les produits. En vous abonnant, vous gagnerez également le «Badge utile»! Vous pouvez vous désinscrire à tout moment sur la page des paramètres de confidentialité.

Aidez les autres et soyez plus heureux!

  • S'abonner

À propos des badges

Les badges sont liés à la communauté et les utilisateurs le font en créant un contenu de qualité, en complétant des missions ou en participant à des activités spéciales. Les personnes spécifiques auront également leur propre badge exclusif.
Badge du PDG

L’insigne du PDG appartient uniquement au patron de Banggood.

Les badges que vous pouvez gagner arrivent bientôt
  • OK

About Badges

Badges are related to the community, and users earn badges by creating quality content, completing missions, or by participating in special activities.

Helpful Badges

The Badge is awarded to users who are subscribed to the Invite Answer email and signifies their gratitude to help others. The badge appearance upgrades as the user helps more people.
  • OK

Thank you for subscribing! You have also earned a badge!

  • View It

Thank you! Your answer will help ###name### and ###num### other people!

Check awaiting answers to see more people who need help.

  • OK

Thank you! Your answer will help ###name### and ###num### other people!

Subscribe to "Invite Answer"emails and help others with product questions will earn you "Helpful Badge"!

  • Subscribe

Are you ready to help?

We invite you to subscribe to our Invite Answer email!

Subscribe and you’ll be invited to answer product’s question by email, which will also earn you a "Helpful Badge"! You can cancel any time on the privacy settings page.

  • Subscribe