Meilleures offres pour GPS,GPS - Banggood France Achats en ligne

demandé par larrs sur 2017-12-08 07:12:37

BG331362113 yes it can

2022-03-19 10:02:53 Utile

Soumettre

réponses (1)

larrs 10/01/2020

The construction is solid, and the PCB design is sane. It's very similar to the wavebubble design, with two boards sandwiched with a header. Amplifier stages are OK. Unfortunately my unit had port 2 die rather soon. The antennas might come loose due to vibration. Because there is no open output protection the affected ports might die. Heat is also an issue, there isn't really enough ventilation for long term use. Still an OK and convenient purchase. Do not use these in open areas and especially without a license to transmit in the affected frequencies. Tested with a siglent spectrum analyzer :)

N8 GPS Portable Anti Tracker 8 Bandes CDMA GSM DCS 2G 3G 4G WIFI BD Divers Hertz Pays Personnalisé

93,94€ 140,04€

17

Commentaires (5)

larrs 10/01/2020

It does what it's supposed to do :)

Tracker de voiture portatif GPS N3 2G avec batterie intégrée, faible consommation d'énergie

18,78€ 38,31€

1

Commentaires (0)

Réglable AC 110 / 220V à 0-48V 10A 480W Commutateur d'Alimentation Pilote LCD Affichage pour Sangle de Lumière LED

49,91€ 52,60€

Q: How is the filtering for noise/emi/rfi?

demandé par larrs sur 2017-12-02 01:47:13

nicknameeeeee Don'thear any noise. about Emi, rfi don't know.

2020-05-16 12:23:46 Utile

Soumettre

réponses (1)

Alimentation à découpage LED RD6006/RD6006-W S-400W-48V/DC12V/24V/36V/60V 8.3A-33.3A. Prise en charge de la surveillance, de l'éclairage du transformateur

33,81€ 48,69€

Q: Can someone comment on how filtering looks like on this one?

demandé par larrs sur 2019-12-24 03:57:34

Umbratherios Dave on the eevblog made two videos on this power supply. on the first one he messed up, but on his secondary video he corrected his mistakes. it has about a 100mv peak to peak voltage, according to the comment he left on his first video.

2020-02-01 06:31:50 Utile (2)

Soumettre

réponses (2)

larrs I have some LEDs that are dim in mine... perhaps this is the culprit? They flash but extremely faint.

electroncraig 25/08/2017

Received my kit today and assembled it. Turned on tree and only the top light lit. After troubleshooting I found that the transistors they sent were 9012's which are PNP transistors, the kit requires 9014 transistors which are NPN. The schematic with the instructions has the 9014's as PNP's. The diagram is correct for NPN's. Fortunately I had NPN's in the parts drawer and after replacing them the Tree lit up beautifully. This is the first time I have had incorrect parts in a kit. It is made more difficult when the schematic has the incorrect parts listed. Anyway it was "fun" trying to figure out what was wrong.