Meilleures offres pour VolantexRC ASW28,1/8 120A ESC Brushless - Banggood France Achats en ligne

BG325401318

mon contenu: Tous les messages; Commentaires; Commentaires; réponses; Questions

Tous les messages

BG325401318 10/09/2020

The ASW 28 2.54m from Banggod is a cheap - but good flyer. I have not crashed it during 10+ flights. My less experienced friend DID crash it however. But the only damage from going inverted INTO a tree was: Some cuts into the wings, a fairly big crack on the outermost left wing, and finally one aileron was hanging by the servo rod. All fixed easily with tape and glue. She has run 4 flights since the crash. Good: sturdy flyer, easy to fly, very slow tipstall, good platform for heavy loads. Looks majestic in the air. Bad: nothing really. Recommended mods: remove wheel and put a piece of plastic to free up space so a bigger battery or other stuff for FPV can be placed further back. A longer plate to mount battery on inside fuselage. Tape the foam hinges as they are a little bit thin. Run it with a 12x4,5 prop on 3S or stock 10x5 prop on 4S for easy take offs. I use 4S 4000mAh and get easily 20 minutes of flying, with battery at storage when landed. Put connectors outside the fuselage when connecting the servo wires on ailerons and flaps. Or widen the hole where they are pulled through. The canopy is...rubbish I'm afraid. Drill out the small holes where the canopy fasteners are stuck into, o put screws instead. This canopy WILL break otherwise. The "hooks" that lock the wings into fuselage will probably have to be sanded to fit nicely. My left needed about 1mm to lock easily. For the price this plane flies very well. Cheers!

VolantexRC ASW28 ASW-28 V2 2540mm Envergure en Pente EPO Planeur Avion RC KIT/PNP

156,83€ 260,15€

4

Commentaires (0)

BG325401318 10/12/2022

Seems to work fine. Only installed and run it on the bench, but for this price it doesn't matter if it fails after ten runs.

ESC sans balais de 120A T/XT60 avec prise 5.8V/3A SBEC 2-4S pour pièces de voiture RC 1/8

28,59€ 34,86€

0

Commentaires (0)

BG325401318 23/08/2021

Have used this 3Amp 300VDC generator as a makeshift battery charger. Has worked very well. Sometimes it stops a few tenths of a Volt above your setting. E.g. stops at 126.3V when set for 126.0V. Otherwise does what it says. Fan comes on when the chassi is handwarm. Remember to use insulated gloves when working with live power above 50V. Also, when connecting to batteries start the machine and activate the output to within a few Volts to avoid arcing/sparks. E.g. Power on, output on, 180V+-2V when battery is at 180V.

WANPTEK Alimentation à découpage régulée CC programmable 0-300V 900W PWM à haute puissance Style châssis

339,90€ 353,33€

0

Commentaires (0)