Meilleures offres pour Récepteur RC,Lunettes FPV,Batterie Lipo - Banggood France Achats en ligne

Schrauber601

mon contenu: Tous les messages; Commentaires; Commentaires; réponses; Questions

Tous les messages

Schrauber601 30/06/2021

The smallest RC receiver I know! The ExpressLRS system works really well on 2.4GHz and these tiny EP1 / EP2 can be updated using a phone with WiFi... Great. Putting 2 antennas with different length in the EP1 package is a great decision: So there is enough spare left and in the case of a T-antenna shortage: These receivers can be used with other 2.4GHz antennas (u.FL) too... There is a tiny lag of manual - there is none (June 2021), but all needed information are available (pinning, update process ...).

0,42 g Happymodel 2.4G ExpressLRS ELRS EP1 Nano récepteur RC longue portée ultra petite taille haute fréquence pour drone RC

20,96€ 24,18€

3

Commentaires (1)

Schrauber601 24/09/2018

I compared it with my EV100D and my Aomway Comander V1. This EV100D wears comfortable on my face with thick foam, but the faceplate is to wide to use the thin one - its wider in comp. to my other goggles. RHO lenses fits well. Complains: - Firmware! Button handling laggy - DVR enabling after every power-up - noisy internal fan (not cooling RX too) - 'CarDV' DVR image quality (black rims. brightness)

Eachine EV200D 1280*720 5.8G 72CH Lunettes FPV à vraie diversité HD Port en 2D/3D Enregistreur intégré avec boîtier de batterie 18650 pour drone RC

324,35€ 358,40€

3

Commentaires (0)

Schrauber601 05/11/2018

This powerful battery outperforms all my other pack I have... There I no voltage sag noticeable on the hole flight even at low temperatures. For comparison I own a Ahtech Infinity Race-Spec 4S 1500mAh (really good) and a Infinity RS-Force V2 (really bad) and several Infinity 70C batteries (better than expected + durable). This CNHL Ministar have ~ 40% less internal resistance than my relly good Race-Spec!

Batterie Lipo CNHL MiniStar 14,8V 1500mAh 4S 120C avec connecteur XT60 pour drones RC FPV Racing

20,98€ 36,33€

3

Commentaires (1)

Schrauber601 30/06/2021

I got this JR-Bay TX very early with a white case. This case is the reason for not rate it 5 stars... I designed and printed a alternative case with a lot better PCB mounting solution. Beside this downside the system itself works really well. Updates are easy using a phone and WiFi and there is an additional WiFi capable ESP µC (backpack) for future use-cases.

Module de Micro TX Happymodel ES24TX 2.4GHz ExpressLRS ELRS longue portée à faible latence et à reprogrammation élevée pour Drone RC

49,30€ 54,89€

0

Commentaires (0)

Schrauber601 14/08/2020

A decent camera with a good promotion price - BUT... I bought this 19mm cam in a promotion sale with 1.8mm lens for my race drone. Using 16:9 aspect it's difficult do get cameras with a large FOV. This one have a large 16:9 native sensor and with this lens it's provides a good FOV. The picture quality is really great (not tested in the dark jet). The menu is identical to some Caddx cams I own and this one looks like almost (with differences) like a Caddx Ratel from the back side (plastic cover). With this back side cover it's difficult to mount it in tight frames with a tilt below 50°. I bought two of them. After testing the settings with my 2nd one, I just want to go back to Factory Defaults... So I klicked "Reset" in the menu and after this, the picture suddenly goes to bright white with some psychedelic looking outlines. I tried everything to it back to normal... But with D-WDR feature enabled ("OPEN") the picture looks that way. The cam only delivers a picture without D-WDR, but this is not really usable for FPV... Before that happens, I was impressed how good the picture quality was.

Eachine White Snake Cmos 1500TVL PAL / NTSC 16: 9/4: 3 Mini caméra FPV HDR commutable avec carte OSD pour drone FPV Racing RC

24,74€ 37,95€

8

Commentaires (0)

Schrauber601 13/05/2020

A really easy to fly, lightweight model. I put all the iNAV + FPV electronics into the fuselage - it's small but manageable. With the original canopy there is no room for a usual 4S 1500mAh battery, but with 4S 1100mAh I got more than 15min flight time (17km traveled distance). It's efficient too. The very short manual isn't good if you are a beginner... The EPP is strong and supported by a plywood plate (fuselage). Even the packaging is robust. I have mine at 441g AUW (w/o FPV, GPS, FC there is a lot room for a really lightweight model).

Sonicmodell Skyhunter Racing 787mm Envergure EPP FPV Kits de course pour avions RC

70,61€ 73,68€

9

Commentaires (1)

Schrauber601 16/03/2018

This frame I bought for a spare quad (if I crash my main chameleon), but I was surprised about the performance. My build (photos) weights 326g - a ton lighter than my chameleon (-67g). I used not a single screw or bold from this kit. Part list: - FC+ESC's: Racerstar TattooF4S 30A - 4x RCX NK2204 2400KV FPV Racing Motor - RunCam Sparrow - VTX EWRF E709TM3 5.8G 48CH - Receiver FrSky XSR - Realacc UXII 5.8G 1.6dBi MMCX-90 Degree RHCP Antenna (was a total fail - I wait for a Foxeer pagoda with MMCX now) - Racerstar R5040X3 5040 3-blade propeller With this setup - esp. with the Racerstar propeller - I got a strong audible resonance at 215Hz, mostly at yaw. This a a bit con if you put a action cam on top: A bit jello and a strange sound is the result. I hope with other well balanced propellers this effect gets weaker but it is part of the frame design and my setting with the 5mm spacer. Pros: - not heavy, not fragile - thin arms, wide wheelbase for clean air - low profile, mass (battery) centered along the roll axis - good FPV camera protection, mount for standard cams - 2nd 30.5mm mounting position at the back for a VTX - very good battery position Cons: - strange 215Hz resonance (spacer-arm-spacer assembling) - approx 45° uptilt for a action cam - this frame isn't a racer! 25-30° are better here - no screws for 15mm height - no 28mm standoffs (only 25mm plus 3mm) - no additional "soft" parts like battery-pads, straps, stands... - need for 8mm M3 screws for the motors (5mm arms)! I didn’t crash it hard till today - so I can't tell anything about the robustness.

RJX 220mm Empattement 5mm Bras Fiber De Carbone RC Drone FPV Racing Cadre Kit 114g

28,31€ 33,98€

7

Commentaires (1)

Schrauber601 03/04/2020

Nice 8-inch tablet with full LTE / mobile phone capability. Very good high-resolution display. It's a pity that Chuwi don't offer an Android update. This device is still shipped with pure Android 8.0. The performance is decent - enough for the most apps and internet sides. Fully charged I can use it 2-3 days. A second one, bought by my friend arrives DOA - dead on arrival. No reaction, no charging - simply dead: -2 stars on quality.

Boîte d'origine EU Asia Frequency Version CHUWI Hi9 Pro 32GB MT6797D Helio X23 Deca Core 8.4 Pouces Android 8.0 Dual 4G Tablet

135,47€ 179,39€

0

Commentaires (1)

Schrauber601 20/09/2019

This Buzzers work well on any flight controller I tested. They are really loud - good for finding a lost RC model.

5 Pcs 5V Electromagnétique Ronfleur Actif Continue Bip en Continu

8,59€ 9,30€

0

Commentaires (0)

Schrauber601 18/09/2019

Very nice red. Simple standoff in many lengths.

Suleve ™ M3AR1 M3 en Alliage d'Aluminium Goujons Standoff 8-35mm Rouge Rond Espaceur de Bord PCB Standoffs 10pcs

8,59€ 9,30€

0

Commentaires (0)

Schrauber601 31/10/2018

Nothing more to say: A micro (19mm) camera with exceptional good low light sensitity, gread WDR and good color reproduction, wide angled, PAL-NTSC and aspect ratio switchable... It's a mater-piece! --- But I have cons: It's expensive - You can buy 2 Caddx instead. Using a M12 lens the weight is a bit more compared to M8 lens style cams. Finally: This cam has no microphone (ok only a few micro cams have it)

RunCam Micro Eagle 1 / 1.8 CMOS 800TVL Global WDR caméra FPV pour Drone RC

42,90€ 46,02€

0

Commentaires (0)

Schrauber601 31/10/2018

This frame is easy to build even with larger 4in1 ESC in the stack. It supports a 19mm micro camera that is a bit (not full9 protected. So a Runcam Swift Micro or a Caddx Turbo Micro F2 fits well - bit a Runcam Micro Eagle is (M12 lens) a bit too exposed for me. The frame is slightly streched-X (more true X) an comes with battery-strap and more addons. --- Cons: The arms are get soft (de-laminate) a bit to fast - I guss It's not the best carbon used here. A battery rubber pad is not included.

Realacc Tix 220 220mm 5 pouces RC Drone FPV Racing Kit Kit 5mm Bras W / 5V et 12V PDB

0

Commentaires (0)

Schrauber601 31/10/2018

With this package you got a complete whoop-class flyer for a low price. But there are some cons you should know: --- this painted frame is very fragile: I broke a duct by hitting a table-leg; the battery holder is broken too after falling down from ~1m (3ft) I use a BetaFPV 65pro frame now. --- the 3-blade props are not recommended because there have not enough power: Use 4-blade (a set is included) --- In the moment there is a Betaflight bug (still in 3.5.2) so the FC can suddenly freeze (maybe related to the telemetry) Test flight: https://www.youtube.com/watch?v=ye_-HC79wyM

Eachine US65 UK65 65mm Whoop FPV Racing Drone BNF Crazybee F3 Contrôleur de vol OSD 6A Blheli_S ESC

100,00€ 104,34€

1

Commentaires (0)

Schrauber601 16/10/2018

More and more new frames already prepared for mounting a 19mm micro camera appears. So for my new builds I need a decent FPV micro camera. In this format there is nothing better than a Runcam Micro Eagle, but this camera is much more expensive and with the M12 lens the risk to damage it is higher. A Runcam Swift Micro maybe is in the same price region, but the image is much lower quality. Pros: - really good quality image - 16:9 version available - internal microphone - stock settings looks nice Cons: - automatic white balance is too fast, better select manual in the OSD - connector is a 5 pin (+ OSD +Audio pin), not plug'n'fly if a Runcam was installed before

Caddx Turbo Micro F2 1/3

27,63€ 30,14€

4

Commentaires (0)

Schrauber601 25/09/2018

I bought this 4-in-1 to replace a faulty noname 30A ESC (causes flip-of-deaths) and I'm not disappointed. As I bought it, there was no review for it... It survived a lot of heavy crashes. Pros: - works even w/o the lowESR capacitor well on highkV motors (4S) - motors sounds smooth and I got very good response even with BF default PIDs - almost no FPV feed noise - has a good 5V buildin regulator - BLheli_32 and 50A current rating = future proof - should work on 6S (not tested) Cons: - no current-sensor nor ESC telemetry

Racerstar PG50x4 50A 2-6S Blheli_32 Proshot 4 en 1 Sans Balais ESC SBEC 2A/5V pour Drone RC FPV Courses

50,24€ 60,47€

0

Commentaires (0)

Schrauber601 24/09/2018

This VTX can be mount on a 30.5mm stack (half sized) and it offers all modern features (SmartAudio, build-in microfone, MMCX) a modern VTX should have. Great product.

Émetteur FPV Eachine TX805 5.8G 40CH 25/200/600/800mW avec écran LED TX, prise en charge OSD/Pitmode/Smart Audio

26,97€ 42,79€

0

Commentaires (0)

Schrauber601 24/09/2018

I bought this frame twice (one is still in shipping) using 30%-off coupon. Its a nice looking, lightweight racing frame. It offers 30mm height for a stack (both types: 30.5 and 20mm) and comes with a micro camera mount. The arm mount isn't ideal and the arm only offers almost none motor protection but that saves weight. Not so good: one arm on mine delaminate and got wobbly after minor crashes - the quality of the carbon could be better. Stiffness and vibration / resonance appearance are good. I hope I got my 2nd frame soon to have spare arms...

Realacc Tix 220 220mm 5 pouces RC Drone FPV Racing Kit Kit 5mm Bras W / 5V et 12V PDB

0

Commentaires (1)

Schrauber601 22/06/2018

This only 208g heavy 4S Lipo can store 2Ah? Really? Yes - it can! I charged it from 3.73V (not empty) and I put 1800mAh in it - nice. Power delivery at good temperatures are ok like other batteries - but this one costs 20% or more less than other 1500mAh packs! Nice work ZOP - better than my ZOP 1800mAh.

Batterie au lithium ZOP Power 14,8V 2000mAh 4S 65C avec prise XT60

29,00€ 30,70€

1

Commentaires (0)

Schrauber601 16/03/2018

My first of these boards died after a couple of power-cycles right after it was build in finally. The USB socked was a bit misaligned too. I god a replacement from banggood and I ordered a 2nd one as spare. Both of them works well since a couple of months. Using a AIO board isn't a optimal choice and for me it was necessary for my 3 inch RunCam Split 2 build. Beside the problems with the first (labeled Aug 2017) one, these boards emitting the same strong noise on the vbat power like the Racerstar 30A Tattoo ESCs I use. I prefer to add a low ESR capacitor to get a better FPV picture. Betaflight update with target LUXF4OSD recommended. Update to BLHeli32 FW32.3 strongly recommended. Pros: - MPU6000 - light and small - BLheli_32 ESC's (48kHz PWM) + DShot1200 - F4 with buildin OSD - current sensor - 16Mbit data flash for logging - maybe coated Cons: - very noisy ESCs even at 48kHz PWM - in my build I need to rotate -90° (motor remapping) -> USB at the front is impossible to use - no manual - tiny solder pads: not for beginners! - only SBUS (UART RX) + real UART (RX6/TX&) and one possible Softserial (LED strip pad) = one UART less than needed at my Runcam Split build

Racerstar TattooF4S 30A BLHELI_32 4en1 ESC 5V BECw / F4 Contrôleur de Vol AIO OSD Capteur Courant

71,87€ 85,26€

0

Commentaires (1)

Schrauber601 16/03/2018

I bought this clips for replacement on my Racerstar BR2205S because sometimes a motor bell rips of the motor in a crash. These clips a so fragile that it is not easy to reuse them after removing it from a shaft... They bend or crack.

10 PCS Racerstar Circulaire Anneau-U φ3mm pour BR2204/BR2205/BR2205S/BR2205 Moteur Pro sans Balai

6,44€ 7,43€

0

Commentaires (1)