Tous les messages

OzarkChris 2020-01-06 12:45:10
1
Recommandations
Commentaires (0)

Les meilleurs critiques que vous pourriez aimer:

OzarkChris 2019-12-08 20:56:21
2
Recommandations
Commentaires (0)

Les meilleurs critiques que vous pourriez aimer:

OzarkChris 2020-06-09 00:17:30
0
Recommandations
Commentaires (0)

Les meilleurs critiques que vous pourriez aimer:

OzarkChris 2020-05-14 20:46:07
0
Recommandations
Commentaires (0)

Les meilleurs critiques que vous pourriez aimer:

Q: what type of belt is used on it?

demandé par f-romi sur 2019-01-28 09:51:32

OzarkChris It uses the standard rubberized nema belt

2020-05-06 09:20:03 Utile (0)
Soumettre
réponses (1)

Q: does it work for rust removal with the grinder?

demandé par marco94ct sur 2020-05-06 08:55:28

OzarkChris This mask "should work" for your application - of course it WOULD require that you purchase the appropriate filters. I'm not an expert, but I would think that either a standard cotton (1-5 micron) or a cotton+charcoal filter would be best. I use this kind of mask with 1 micron cotton filters for woodworking and as far as I'm concerned, works well to keep sawdust etc out if my lungs. Hope this helps!

2020-05-06 09:19:12 Utile (0)
Soumettre
réponses (2)

OzarkChris This tubing is magical! When you take it out of the package and stretch it straight it starts firming up! The more you play with it and gently caress it the "harder" it becomes. 🤣

2020-04-29 08:58:13 Utile (0)
Soumettre
réponses (1)

OzarkChris A restrição de tempo de 30 minutos é muito típica para esse laser de preço por várias razões: Primeiro, muito calor é gerado a partir do laser, o que não é bom para a eletrônica. Isso é agravado pelo fato de que, para esse fator de forma, o dissipador de calor precisava ser menor. Segundo, o laser do tipo "transistor" usado também é muito suscetível ao calor. Até quanto tempo entre as sessões de "30 minutos". Normalmente, espero pelo menos 10 a 15 minutos, mas talvez você consiga se livrar de 5 a 10, dependendo da temperatura ambiente. Lembre-se de que o uso constante desse tipo de laser reduzirá definitivamente sua expectativa de vida. Sugiro que, se você estiver pensando em usar isso em um aplicativo comercial ou semi-comercial, convém repensar. Você pode investir em uma unidade de CO2 (que seria de 5 a 10 vezes o valor). Espero que isto ajude!

2020-04-29 08:55:01 Utile (0)
Soumettre
réponses (1)

Q: is there have manual book?

demandé par hendrapin sur 2018-12-15 04:24:00

OzarkChris There are instructions on their WIKI page.

2020-04-29 08:38:33 Utile (0)
Soumettre
réponses (1)

OzarkChris This is a direct quote from the 3M site: "The filter works with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series or 3M™ Filter Adapter 603, and 3M™ Filter Retainer 501. The filter is NIOSH (National Institute for Occupational Safety and Health) approved for environments containing certain non-oil based particles. This filter has been rated N95, which means it filters at least 95% of airborne particles, but is not resistant to oil."

2020-04-29 08:37:45 Utile (0)
Soumettre
réponses (1)
OzarkChris 2020-04-27 22:58:47
0
Recommandations
Commentaires (0)

Les meilleurs critiques que vous pourriez aimer:

OzarkChris 2020-04-27 22:56:32
0
Recommandations
Commentaires (0)

Les meilleurs critiques que vous pourriez aimer: