Commentaires

Hbra9774 Update...In the meantime tested. When starting up, a power supply of 12V -10A is required for the incandescent candidate for about 1 minute, then the current falls back to 150mA - 500mA depending on the fan speed. The consumption of fuel is very limited, especially if no too high room temperature is set, the fan speed is also adjusted. I was surprised that the incandescent coat is activated for about 1 minute when the device is switched off. I suspect that this is applied for the post -burning of the remaining fuel in the combustion chamber. Beautiful product !!

hansbraem 19/02/2023
0
Commentaires (1)

Hbra9774 Update... In the meantime I have tested this device with Nmh batteries, PB batteries, Li-ion batteries, lipo batteries, lifepo batteries with different charging and discharging flows. The characteristics for the different batteries are performed correctly. The security with possible incorrect charging also works perfectly. Good purchase !!

Hbra9774 14/03/2023
0
Commentaires (1)