Mbrownson This motor would be for big 7” setups. If you want a freestyle rig, go with a 5” drone and 2208-2307 size motor. Preferably over 2000+kv

Mbrownson Go with 1300kv for 6s. The 1500kv will get super hot and burn right out on the first crash.

Mbrownson I also use 50A 4in1. I added 35v caps to the power lead and the esc . You kinda need to protect the motors from voltage spikes. Crashing or bouncing off objects.

Mbrownson If your going to use 6s. I recommend adding some 35v caps. One on the 4in1 and 1 on the power lead just to help from voltage spikes that will burn your motor out. Been there with these motors.

Mbrownson Use the Mr.steele prints for this frame. They all fit. See my frame on insta @digimartfpv

Mbrownson No. You’ll need a 10-12 inch dc motor propellar. You may need a mount as well. There are combo kits available. You’ll have to do a google search for 775 dc motor propellar. See what comes up

Mbrownson Yes, use short standoffs and it should be no problem. You can also use bigger and or custom standoffs for this frame

Mbrownson Its foam face plate that is cushion instead of the rubber face plate. I recommend 3d printing a shim for light leaks with this foam face plate.