napoleon_dim its the discharge rate of a battery. You multiply it by the mah of the battery to get the max current. 35c * 2200mah = 77000 mA = 77A

napoleon_dim Its 1-2mm longer. you take out the cover of the a959 stock servo and you cut two small plastic on one side. and it gets more wide. then it fits perfectly.

napoleon_dim Maybe its broken maybe not. The red motor cable goes with the blue. The yellow with the black. See if the jumper is set at F/B. Then you only have forward throttle and braking. Then, if your transmitter has the choice, reverse the throttle channel. My ax6s has a switch. I was pressing throttle stick forward and it went reverse. I found the answer on the internet and I fixed it. Read your transmitter manual. Try this solution.

napoleon_dim Yes. I guess its the blue one. I saw it on the third video. The first batch of these boats had a black defective esc. This blue is ok

napoleon_dim Its for the a959-b. The screw hole is 3.175mm. The a959 uses 2.3mm pinion gears...

napoleon_dim Its a 2.4 transmitter. I had the same question once..in you search the internet you will see that each 2.4 transmitter will bind to the receiver that is nearer. Then bing the other transmitter with the other receiver. You can use as many as you like. There are no channels in 2.4 transmitters...

napoleon_dim There are pictures in the reviews that shows that you can use them. See the pictures. You only have to buy the 12mm hex adaptors...

napoleon_dim There are images on internet that show that it will fit.