BG535461171
- mon contenu
- Tous les messages
- Commentaires
- Commentaires
- réponses
- Questions
réponses
Q: Whats the max output power on the video transmitterjQuery11130030540906817127844_1641416291906
demandé par BATAN sur 2022-01-05 14:59:28
Q: can it also take 3.5 inch Props?
demandé par mupfel11 sur 2021-05-15 16:26:19
BG535461171 No there is no space between the 3 props , but you can purchase the evan 3inchprops.
Utile (0)
Q: what is the range of remote
demandé par BG563942259 sur 2020-07-24 22:08:42
BG535461171 Normal range in CE Mode (Europe) is 0,7km . In FCC Mode (Notheern America) the range is about 4km. But there are second part Antennas on the market which have higher gain and give you more penetration and range of course.
Utile (0)
Q: can you use it without the goggles
demandé par fireforce sur 2020-07-25 06:43:56
BG535461171 Yes you can but you need the airunit of DJI where is the receiver installed.
Utile (0)
Q: Does the 10volt BEC require any link from the ESC to operate? I do not have any 10v to the VTX
demandé par beachdogger1 sur 2021-02-02 23:52:42
BG535461171 This FC has an 10 Volt output on the board so you need only the normal 5v connection from your esc.
Utile (0)
Q: Witch motor in included? Mfg xxx
demandé par BG244954351 sur 2021-03-22 15:18:19
BG535461171 Itwill come with the 1404 2750KV Motor installed that are really great for long time cruising cause they have an exellent " wirkungsgrad" that will give you long flight time.
Utile (1)
Q: works with fatshark attitude 6?
demandé par BG571754332 sur 2021-03-08 07:46:49
BG535461171 Sureit will work fine if you have a 5,8ghz rx module installed in your googles but that is normally the case.
Utile (1)
Q: if I get the r9mm reciever can you send it with the accst system? I have to old qx7 and r9m.
demandé par test 1 sur 2020-11-19 22:54:39
BG535461171 Does The r9mm reciever work with Taranis x7 Access and R9M 2019 Module and must it be flashed , and how to do?
Utile (1)
BG535461171 This is a 40 channel 600mw Vtx.
Utile (0)