RC_Dude No. Unless you install a gyro stabilizer or flight controller. Electronic components in PNP version are: motor 850kV, esc (for 3s battery), installed 6 servos.

RC_Dude Bad idea becouse you burn your ESC in fist flight. But you can use better ESC which can withstands higher current and 4s better than the original volantex ESC. For normal and safe use of a 4s battery I would recommend ESC with at least 50A 2-6s. With a 4s battery, you will probably break the propeller in mid air sooner or later.

RC_Dude Yes it has a low signal strength level alarm. You will probably need to enable SigS1 in the settings for this, a very useful feature anyway. It shows the current signal quality on a scale of 1 to 10 and from some point starts signaling maybe 4 and below I don't remember. Remember that carbon blocks radio waves and mount the receiver antennas correctly. In the air when there is direct visibility this transmitter can transmit up to 2 km and more, but on the ground in high and wet grass 100m max.

RC_Dude No. Actualy picture shows CW propeller but description says CCW. I need real CCW for pusher plane. Ewerywhere in e-shops cw means cw, ccw means ccw but here in BG ccw and cw is cw only. You can check it yourself if normal right thred bolt self lock on tractor (usual) configuration it means it's CW.

RC_Dude Maybe if that card supports 2G.

RC_Dude Under top cover on which written GF-22 and ON-OFF swith. But it's better to ask someone who understand things like this to insert the sim card and memory card because there is a chance that you will break the lock of the sim card. Anyway, everything is written in the instructions.

RC_Dude Need 2G sim card.

RC_Dude no