Avis sur Module de charge de batterie Li-ion USB de version 3.2V/3.7V/4.2V avec fonction de protection - Achats en ligne Banggood Français

Module de charge de batterie Li-ion USB de version 3.2V/3.7V/4.2V avec fonction de protection

6,38€
~~7,37€~~
Acheter maintenant

Avis des clients

4.96 sur 5

Voir tous les 93 commentaires

5 étoile
89 (95.7%)
4 étoile
4 (4.3%)
3 étoile
0 (0%)
2 étoile
0 (0%)
1 étoile
0 (0%)

Ecrire un commentaire Obtenez le double des points de revue si vous votre revue est l'une des 3 premières publiées !

Tous les Commentaires (93)
Image (12)
Vidéo (0)
Toutes les Étoiles
- Toutes les Étoiles(93)
- 5 Étoile(89)
- 4 Étoile(4)
- 3 Étoile(0)
- 2 Étoile(0)
- 1 Étoile(0)

Trier par:

Commentaire Top

Commentaire Top
Le plus utile
Le plus récent

Avis uniquement de votre pays (France)

|

Afficher l'original

Une partie de la critique a été traduite automatiquement.

bodoo69VIP3
RO
23/07/2018

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged

1 OUT + This pins outputs the positive voltage from battery. It should be connected to the circuit which has to be powered by the battery 2 B + Outputs positive voltage from USB cable to charge to battery. It should be connected to the positive of the battery 3 B - Outputs negative voltage from USB cable for charging battery. It should be connected to negative of the battery 4 OUT - This pin outputs negative voltage from battery. It should be connected to the ground of circuit which has to be powered by the battery 5 IN + Should provide +5V can be used if charge cable not available 6 IN - Should provide ground of the +5V supply can be used if charge cable not available 7 LED Red This LED turns on while the battery is charging 8 LED Green This LED turns on after the battery is fully charged
3

Commentaires

Afficher l'original
SbvosetaVIP1
IN
20/07/2019

Good

Good

Good
1

Commentaires

Afficher l'original

Show:

Total 0 pages

Aller à la page

Aller

Vous pourriez être intéressé par

recommendation for you