Following a review from Steve Jordan on YouTube, I gave one of these a try on my mill for dribbling cutting oil on the cutters. Easy control and install and able to drip or squirt oil where it's needed during machining.

Following a review from Steve Jordan on YouTube, I gave one of these a try on my mill for dribbling cutting oil on the cutters. Easy control and install and able to drip or squirt oil where it's needed during machining.

Following a review from Steve Jordan on YouTube, I gave one of these a try on my mill for dribbling cutting oil on the cutters. Easy control and install and able to drip or squirt oil where it's needed during machining.

The product is good n useful. thanks

The product is good n useful. thanks

The product is good n useful. thanks

An excellent manual oil pump made for motorcycles but can be used on all different types of machinery.I use mine to pump cutting oil on the lathe.

An excellent manual oil pump made for motorcycles but can be used on all different types of machinery.I use mine to pump cutting oil on the lathe.

An excellent manual oil pump made for motorcycles but can be used on all different types of machinery.I use mine to pump cutting oil on the lathe.

très bon produit. utilisé pour un système de lubrification de tour avec d'excellents résultats.

very good product. used them for a lathe lubrication system with excellent results.

très bon produit. utilisé pour un système de lubrification de tour avec d'excellents résultats.

Un fantastique système d'huile à commande manuelle. Je les utilise pour égoutter l'huile de coupe sur les pièces de travail et l'outillage lors de l'usinage sur mes tours. Le mécanisme de déclenchement est sensible et positif de sorte que l'on peut égoutter l'huile lentement ou rapidement lors de la coupe. Il ya quelques vidéos YouTube sur l'utilisation de ces sur les machines d'ingénierie et comment faire un grand système de coupe d'huile à faible coût avec eux. Un excellent kit.

A fantastic manually operated oil system. I use these to drip cutting oil on work pieces and tooling when machining on my lathes. The trigger mechanism is sensitive and positive so one can drip oil slowly or fast when cutting. There are some YouTube videos about using these on engineering machines and how to make a great low cost cutting oil system with them. An excellent piece of kit.

Un fantastique système d'huile à commande manuelle. Je les utilise pour égoutter l'huile de coupe sur les pièces de travail et l'outillage lors de l'usinage sur mes tours. Le mécanisme de déclenchement est sensible et positif de sorte que l'on peut égoutter l'huile lentement ou rapidement lors de la coupe. Il ya quelques vidéos YouTube sur l'utilisation de ces sur les machines d'ingénierie et comment faire un grand système de coupe d'huile à faible coût avec eux. Un excellent kit.

Got this to use on my lathe and mini mill to use as an oiler. good sturdy construction.

Got this to use on my lathe and mini mill to use as an oiler. good sturdy construction.

Got this to use on my lathe and mini mill to use as an oiler. good sturdy construction.

Great value for money, makes a handy oiler for parting off operations on a lathe. 1) Mount the reservoir at the back of the lathe. 2) Route the oil pipe up to the tool holder. position it over the parting off tool. 3) Mount the pump lever at the front of the lathe, then you can slowly pump with one hand as you part off with the other hand. A constant little trickle of oil will help to prevent the tool from jamming and breaking off!

Great value for money, makes a handy oiler for parting off operations on a lathe. 1) Mount the reservoir at the back of the lathe. 2) Route the oil pipe up to the tool holder. position it over the parting off tool. 3) Mount the pump lever at the front of the lathe, then you can slowly pump with one hand as you part off with the other hand. A constant little trickle of oil will help to prevent the tool from jamming and breaking off!

Great value for money, makes a handy oiler for parting off operations on a lathe. 1) Mount the reservoir at the back of the lathe. 2) Route the oil pipe up to the tool holder. position it over the parting off tool. 3) Mount the pump lever at the front of the lathe, then you can slowly pump with one hand as you part off with the other hand. A constant little trickle of oil will help to prevent the tool from jamming and breaking off!

Seen Steve Jordan on Youtube using this product with cutting oil on his lathe so i got one for mine.

Seen Steve Jordan on Youtube using this product with cutting oil on his lathe so i got one for mine.

Seen Steve Jordan on Youtube using this product with cutting oil on his lathe so i got one for mine.

high quality, fast delivery, thanks

high quality, fast delivery, thanks

high quality, fast delivery, thanks

สินค้าดี รอนานหน่อย มาทางเรือ

สินค้าดี รอนานหน่อย มาทางเรือ

สินค้าดี รอนานหน่อย มาทางเรือ