Livrer à United Kingdom , USD
Top Avis positif pour %s sur Banggood, Achetez le meilleur %s avec le prix le plus bas sur Banggood. Parcourez l'avis positif le plus utile pour %s avant d'acheter., jouets rc, sports amusants, mode, électronique populaire
JPDuhen 11/01/2019
To flash, connect GPIO0 and GPIO2 to GND, remove the camera, power it with 3.3V, not 5V. The board needs to be programmed with ESP-IDF as explained in details in Github, https://github.com/donny681/ESP32_CAMERA_QR and there’s no Arduino IDE support. So if you’r not comfortable with using Espressif development framework better skip this board. The demo code takes a QR code, and outputs it as ASCII code in the serial console.
8
Commentaires (1)
Soumettre
  • Mark Hurley Ihad to power it with 5V to get the camera working properly. And this is compatible with Arduino IDE -- just be sure to add ESP setup beforehand.

    Répondre 08/05/2019
Enquête de Satisfaction

Téléchargez l'application pour obtenir une exclusivité 10% off coupon