Très bon.

Very good.

Très bon.

Not a bad option if the square layout works for you! I put on in a Esky Eagle and it's flying great! You'll need to get the firmware from CLRacing's site if you want to update to the latest version of iNav. For some reason it's not being compiled for this board in the normal releases. It's not hard to compile yourself also, all the code for the target is already in the source. I'm using one with a R9MM receiver using Fport, I needed to use a different UART pin that UART1, the TX pin for UART1 is not broken out on the board. (Confirmed by CLRacing, there's a mistake on the pinout on their site, at least at this time.) I have a build series for setting this up in the Eagle if you're interested: https://www.youtube.com/playlist?list=PL2cI_igmLd9YEz0e8PHR57pSYddi-SyGL BTW, it wasn't clear to me, or maybe I missed it, but this DOES include the GPS with the board which makes it an even better value.

Not a bad option if the square layout works for you! I put on in a Esky Eagle and it's flying great! You'll need to get the firmware from CLRacing's site if you want to update to the latest version of iNav. For some reason it's not being compiled for this board in the normal releases. It's not hard to compile yourself also, all the code for the target is already in the source. I'm using one with a R9MM receiver using Fport, I needed to use a different UART pin that UART1, the TX pin for UART1 is not broken out on the board. (Confirmed by CLRacing, there's a mistake on the pinout on their site, at least at this time.) I have a build series for setting this up in the Eagle if you're interested: https://www.youtube.com/playlist?list=PL2cI_igmLd9YEz0e8PHR57pSYddi-SyGL BTW, it wasn't clear to me, or maybe I missed it, but this DOES include the GPS with the board which makes it an even better value.

Not a bad option if the square layout works for you! I put on in a Esky Eagle and it's flying great! You'll need to get the firmware from CLRacing's site if you want to update to the latest version of iNav. For some reason it's not being compiled for this board in the normal releases. It's not hard to compile yourself also, all the code for the target is already in the source. I'm using one with a R9MM receiver using Fport, I needed to use a different UART pin that UART1, the TX pin for UART1 is not broken out on the board. (Confirmed by CLRacing, there's a mistake on the pinout on their site, at least at this time.) I have a build series for setting this up in the Eagle if you're interested: https://www.youtube.com/playlist?list=PL2cI_igmLd9YEz0e8PHR57pSYddi-SyGL BTW, it wasn't clear to me, or maybe I missed it, but this DOES include the GPS with the board which makes it an even better value.

Je vais essayer.

I w'll try

Je vais essayer.

bon équipement, transport complet, bonne sensibilité GPS

good equipment, complete transport, good GPS sensitivity

bon équipement, transport complet, bonne sensibilité GPS

looks good quality but not tested

looks good quality but not tested

looks good quality but not tested