bought for a portable emergency project.. needs heatsink .. light output is high.. can run with a 3 amp boost driver .

bought for a portable emergency project.. needs heatsink .. light output is high.. can run with a 3 amp boost driver .

bought for a portable emergency project.. needs heatsink .. light output is high.. can run with a 3 amp boost driver .

works well, very efficient when under run

works well, very efficient when under run

works well, very efficient when under run

Produto muito bom e bem acabado, recomendo este produto.

Produto muito bom e bem acabado, recomendo este produto.

Produto muito bom e bem acabado, recomendo este produto.

The description for this product says that it is suitable for 24V systems. However, if you connect it directly to 24VDC, it is VERY bright and draws a LOT of current. Best to use it with a current-limiting circuit, or 12VDC only.

The description for this product says that it is suitable for 24V systems. However, if you connect it directly to 24VDC, it is VERY bright and draws a LOT of current. Best to use it with a current-limiting circuit, or 12VDC only.

The description for this product says that it is suitable for 24V systems. However, if you connect it directly to 24VDC, it is VERY bright and draws a LOT of current. Best to use it with a current-limiting circuit, or 12VDC only.

bien

good

bien

excelent cob led strip to create appliques adding an appropriate heat sink or replacing alogen lamps

excelent cob led strip to create appliques adding an appropriate heat sink or replacing alogen lamps

excelent cob led strip to create appliques adding an appropriate heat sink or replacing alogen lamps

very good

very good

very good

Amazing Light performance. Cool white light.

Amazing Light performance. Cool white light.

Amazing Light performance. Cool white light.

Bright, gets warm fast. Need some heat radiator. Good stuff.

Bright, gets warm fast. Need some heat radiator. Good stuff.

Bright, gets warm fast. Need some heat radiator. Good stuff.

Good light but don't forget some cooling stuff (I used old Processor dissipator) because they become a bit warm (tested under 12V -> 1.7A)

Good light but don't forget some cooling stuff (I used old Processor dissipator) because they become a bit warm (tested under 12V -> 1.7A)

Good light but don't forget some cooling stuff (I used old Processor dissipator) because they become a bit warm (tested under 12V -> 1.7A)