not schema included. I upload it for help people

not schema included. I upload it for help people

not schema included. I upload it for help people

Got this to control a fan for a BBQ smoker and it works right out of the box without going into settings. I probably wouldn't buy this if you need to tweak what I would call the deep settings. Just hook up the thermocouple, hit set and input your target value (SV). I'm only going to use this for heating so I don't need to adjust anything else. I may do something with the alarm relay but I'll be right next to it as it works so its not like I need an audible alarm. The SSR supplied will only work with AC loads. I'm using a DC fan so I got the SSR-100 DD Solid State Module Solid-state Relay DC-DC from here.

Got this to control a fan for a BBQ smoker and it works right out of the box without going into settings. I probably wouldn't buy this if you need to tweak what I would call the deep settings. Just hook up the thermocouple, hit set and input your target value (SV). I'm only going to use this for heating so I don't need to adjust anything else. I may do something with the alarm relay but I'll be right next to it as it works so its not like I need an audible alarm. The SSR supplied will only work with AC loads. I'm using a DC fan so I got the SSR-100 DD Solid State Module Solid-state Relay DC-DC from here.

Got this to control a fan for a BBQ smoker and it works right out of the box without going into settings. I probably wouldn't buy this if you need to tweak what I would call the deep settings. Just hook up the thermocouple, hit set and input your target value (SV). I'm only going to use this for heating so I don't need to adjust anything else. I may do something with the alarm relay but I'll be right next to it as it works so its not like I need an audible alarm. The SSR supplied will only work with AC loads. I'm using a DC fan so I got the SSR-100 DD Solid State Module Solid-state Relay DC-DC from here.

Хороший полноразмерный (100 мм) терморегулятор в комплекте с твердотельным реле и термопарой в оригинальной заводской упаковке с инструкцией на английском. Единственное несоответствие, это термопара в комплекте на 400 градусов, а терморегулятор по умолчанию запрограммирован на термопару 999 градусов.

Хороший полноразмерный (100 мм) терморегулятор в комплекте с твердотельным реле и термопарой в оригинальной заводской упаковке с инструкцией на английском. Единственное несоответствие, это термопара в комплекте на 400 градусов, а терморегулятор по умолчанию запрограммирован на термопару 999 градусов.

Хороший полноразмерный (100 мм) терморегулятор в комплекте с твердотельным реле и термопарой в оригинальной заводской упаковке с инструкцией на английском. Единственное несоответствие, это термопара в комплекте на 400 градусов, а терморегулятор по умолчанию запрограммирован на термопару 999 градусов.

fast shipping good packaging

fast shipping good packaging

fast shipping good packaging

Good appearance, good price of the kit. But in this version of REX C-100 controller, it can only be used with thermocouple K up to 999 C °, and only in heating mode, also configure the parameters of the PID or use it in ON / Off with configurable band. It has a unique alarm configurable also that can be useful as a second relay output. The manual is in English, but it is for the original version of the REX C-100 and few functions of this, can be used in this version. It is configured in C ° and can not be changed, it can not add decimals to measure and only use three digits of the four that have the display. And I could not enable PID autotuning. It is a simple version of the REX C100 with limited utility, but at the price of the Kit with the SSR and thermocouple is useful if you are looking for a basic controller.

Good appearance, good price of the kit. But in this version of REX C-100 controller, it can only be used with thermocouple K up to 999 C °, and only in heating mode, also configure the parameters of the PID or use it in ON / Off with configurable band. It has a unique alarm configurable also that can be useful as a second relay output. The manual is in English, but it is for the original version of the REX C-100 and few functions of this, can be used in this version. It is configured in C ° and can not be changed, it can not add decimals to measure and only use three digits of the four that have the display. And I could not enable PID autotuning. It is a simple version of the REX C100 with limited utility, but at the price of the Kit with the SSR and thermocouple is useful if you are looking for a basic controller.

Good appearance, good price of the kit. But in this version of REX C-100 controller, it can only be used with thermocouple K up to 999 C °, and only in heating mode, also configure the parameters of the PID or use it in ON / Off with configurable band. It has a unique alarm configurable also that can be useful as a second relay output. The manual is in English, but it is for the original version of the REX C-100 and few functions of this, can be used in this version. It is configured in C ° and can not be changed, it can not add decimals to measure and only use three digits of the four that have the display. And I could not enable PID autotuning. It is a simple version of the REX C100 with limited utility, but at the price of the Kit with the SSR and thermocouple is useful if you are looking for a basic controller.

fast shipping, they do good job.

fast shipping, they do good job.

fast shipping, they do good job.

Provided with an easy-to-follow English manual this tiny (40 x 40 mm front panel) controller has enough user modifiable parameters to steer my 2 x 230 VAC, 5 kW DIY foundry/ hardening oven, even though I had to add another +1300 C K-type element (as the provided thermocouple maxes out at 300C). The solid state relay can handle with a heat sink 40 amps, even though my oven will just pull some 13 A. The 25 metres of 1,2 mm Kanthal A-1 Wire (actually mfg'd some 75 mi from my place) was more expensive here than this entire regulator kit from abroad... Amazing!

Provided with an easy-to-follow English manual this tiny (40 x 40 mm front panel) controller has enough user modifiable parameters to steer my 2 x 230 VAC, 5 kW DIY foundry/ hardening oven, even though I had to add another +1300 C K-type element (as the provided thermocouple maxes out at 300C). The solid state relay can handle with a heat sink 40 amps, even though my oven will just pull some 13 A. The 25 metres of 1,2 mm Kanthal A-1 Wire (actually mfg'd some 75 mi from my place) was more expensive here than this entire regulator kit from abroad... Amazing!

Provided with an easy-to-follow English manual this tiny (40 x 40 mm front panel) controller has enough user modifiable parameters to steer my 2 x 230 VAC, 5 kW DIY foundry/ hardening oven, even though I had to add another +1300 C K-type element (as the provided thermocouple maxes out at 300C). The solid state relay can handle with a heat sink 40 amps, even though my oven will just pull some 13 A. The 25 metres of 1,2 mm Kanthal A-1 Wire (actually mfg'd some 75 mi from my place) was more expensive here than this entire regulator kit from abroad... Amazing!

Товар качественный, получил за 2 недели.

Товар качественный, получил за 2 недели.

Товар качественный, получил за 2 недели.

fonctionne comme décrit.

works as described.

fonctionne comme décrit.

Ürün sorunsuz ulaştı teşekkürler.

Ürün sorunsuz ulaştı teşekkürler.

Ürün sorunsuz ulaştı teşekkürler.