Tous les messages

Q: Is it possible to set the end voltage to 4.00V or 4.10V per cell?

demandé par Jeremy sur 2020-08-29 10:24:49

BG924383610 Yes,you could set the end voltage per cell between 3.85V and 4.35V, where 4.20V is default

2022-03-12 11:03:19 Utile (1)
Soumettre
réponses (3)

Jeremy It has a JST connector for 2S or 3S LiPo. the battery compartment is designed for 4 AA batteries, so the LiPo has to be thin. I'd recommend putting in 2 or 3 3.7V AA rechargable batteries and 1 or 2 "dummy" AA batteries that only act as a wire.

2021-04-23 12:04:36 Utile (0)
Soumettre
réponses (2)

Q: Distance between front and rear wheel centres.

demandé par jarndice sur 2020-06-21 03:58:41

Jeremy The wheelbase is (150 ± 2) mm

2021-03-19 02:18:15 Utile (0)
Soumettre
réponses (1)

Jeremy Yes, you can use several identical cars at the same time in the same place. Just turn on each car and controller together before turning on the next car or controller.

2020-09-04 06:33:19 Utile (0)
Soumettre
réponses (13)

Jeremy The Ch5 and Ch6 knobs are full potentiometers just like with the X6FG. They should give you standard full range of motion with a servo or ESC.

2020-07-30 06:27:11 Utile (0)
Soumettre
réponses (3)

Q: This servo fit on Wltoys 144001?

demandé par maurosantos sur 2020-05-29 10:44:55

Jeremy It's 1 or 2 mm wider than the original servo, but it should fit if you file the mounting bracket a bit. Make sure you have a receiver with standard connectors.

2020-07-06 09:44:22 Utile (0)
Soumettre
réponses (2)