Meilleures offres pour Module TX - Banggood France Achats en ligne

DuMOHsmol

mon contenu: Tous les messages; Commentaires; Commentaires; réponses; Questions

Tous les messages

DuMOHsmol 26/02/2018

Well, the camera works, but actually isn't a CCD camera at all! And even more, the picture quality is worse than on cheaper and lighter micro cams! The stock lens has a narrow angle, the colors are washed out, and the picture is full of oversharping artifacts. Take a look my comparison with Kingkong mini camera. The Eachine is clearly inferior here, and the picture is even worse in movement because of oversharping. Do not recommend!

Eachine 1000TVL 1/3 CCD 110 Degrés 2.8mm Lentille Large Tension 5-20V Mini Caméra FPV NTSC PAL Commutable

9,44€ 21,21€

8

Commentaires (1)

IRangeX IRX4 LITE CC2500 NRF24L01+ A7105 CYRF6936 Module TX multiprotocolee 4 en 1 pour Frsky X-lite

31,63€ 59,54€

Q: Is it compatible with BetaFPV LiteRadio 3 Pro?

demandé par DuMOHsmol sur 2022-09-11 10:22:15

Mauro yesit is copatible

2022-09-21 02:38:47 Utile (1)

Soumettre

réponses (1)

DuMOHsmol 26/02/2018

These are the most aggressive 3mm props for 11xx motors that I could find. They work great with 2S-3S battery and 1106-6000KV motor.

2 Paires d'hélices Gemfan 3035 3X3.5 BN à 3 pales, avec trou de montage de 1.5mm, pour moteur 1104 1105 Drone RC FPV Racing

7,51€ 8,36€

1

Commentaires (0)

DuMOHsmol 26/02/2018

Great value for the price. I like how this frame can fit "larger" components normally used on 250mm quads, like a 600mw transmitter or 35x35mm flight controller. Here are some build tips: 1. The stock standoffs are pretty short, you might need longer ones. The standoffs here are for m2.5 screws. 2. The stock camera plate is for cameras with M12 lens, it doesn't hold a micro camera. Also, this plate will obviously not work with longer standoffs. Eventually, I had to 3D-print a camera holder. 3. There is a little PDB included (which is great!), but the 12V output does not provide 12V at all! I've even had 4.6V on nearly-discharged 2S battery (instead of 12V!). Do not use this PDB output at all, connect your 12V-demanding components directly to the battery voltage. The 5V outputs works fine.

KINGKONG / LDARC 130GT cadre de course en fibre de carbone FPV 130mm w / 5V 12V PDB pour RC Drone

10,34€ 13,25€

4

Commentaires (2)

DuMOHsmol 12/10/2018

The bundled screws were too long. They damaged the windings and three of four motors have stopped working. I did not expect that the screws lying in the same bag with motors would need shortening! A complete disappointment!

4X 1102 11500KV 1-2S Moteur Brushless & 4 paires 1535 hélice pour RC Drone FPV Racing

18,60€ 37,54€

0

Commentaires (2)

DuMOHsmol 12/10/2018

I was pleasantly surprised to find that it has mounting holes for both 16x16 and 20x20 FCs.

Happymodel Toad90 90mm Micro 3K Fiber De Carbone FPV Cadre Racing Kit avec CNC Caméra Aluminium Mont pour RC Drone

13,27€ 19,89€

1

Commentaires (0)

DuMOHsmol 12/10/2018

Bought them for 90mm quad, but did not have chance to test because of broken motors.

4 paires d'hélices à 3 pales Gemfan Hulkie 2040 2.0X4.0 PC CW CCW pour moteur 0806-1105 de drone de course RC FPV

3,90€ 9,30€

0

Commentaires (0)

DuMOHsmol Ooop, I guess I'm really late. My setup is:Frame: Kingkong 130GTMotors: D1106 6000KVESCs: Racerstar RS11APropellers: Gemfan 3035 3X3.5 BN 3-bladeBattery: ZOP Power 7.4V 850mah 70C 2SFlight controller: SP Racing F3 EVOHere is some fpv footage: https://www.youtube.com/watch?v=hzK-0hkHZpE

DuMOHsmol 26/02/2018

Great value for the price. I like how this frame can fit "larger" components normally used on 250mm quads, like a 600mw transmitter or 35x35mm flight controller. Here are some build tips: 1. The stock standoffs are pretty short, you might need longer ones. The standoffs here are for m2.5 screws. 2. The stock camera plate is for cameras with M12 lens, it doesn't hold a micro camera. Also, this plate will obviously not work with longer standoffs. Eventually, I had to 3D-print a camera holder. 3. There is a little PDB included (which is great!), but the 12V output does not provide 12V at all! I've even had 4.6V on nearly-discharged 2S battery (instead of 12V!). Do not use this PDB output at all, connect your 12V-demanding components directly to the battery voltage. The 5V outputs works fine.

KINGKONG / LDARC 130GT cadre de course en fibre de carbone FPV 130mm w / 5V 12V PDB pour RC Drone

10,34€ 13,25€

4

Commentaires (2)

DuMOHsmol 26/02/2018

Works fine on Kingkong Q100 frame. However, It doesn't fit stock mounting latches on this frame, so I had to cut latches off and use the two-sided sticky pad.

Eachine vol brossé panneau de contrôle basé sur F4 Revolutio pour micro cadre fpv Openpilot CC3D 32bits

0

Commentaires (0)

DuMOHsmol 26/02/2018

Perfect for PCB mounting in quadcopters. There is also a nice plastic box with detachable sections.

Sulève™ M3NH1 M3 Nylon Vis Noir Hex Vis Écrou Nylon PCB Standoff Assortiment Kit 300pcs

11,81€ 13,02€

0

Commentaires (0)

DuMOHsmol 26/02/2018

I couldn't find black ones in the shops around me, but banggood has rescued me once again.

100pcs Câble en Nylon Attaches Rapides Fil de Serrage Câble Auto-Verrouillage

0

Commentaires (0)

DuMOHsmol 26/02/2018

It does glow in the dark, but it's dim and fades quickly! I've expected something a little bit longer and brighter.

Dancingnail Halloween Fluorescent Neon Pure Candy Color Luminous Vernis à ongles Non toxique Glow In Dark

0

Commentaires (0)

DuMOHsmol 26/02/2018

OK-ish syringes with extremely useful tips. I use these for soldering flux dispensing.

20CC-30CC seringue SMT SMD PCB pâte à souder adhésif colle liquide distributeur

8,59€ 9,30€

0

Commentaires (0)

DuMOHsmol 26/02/2018

Bought this to make an upgrade for my EV800 goggles. Works fine!

Eachine ProDVR Pro DVR Mini Vidéo Audio Enregistreur pour FPV Multicopters

14,93€ 19,64€

0

Commentaires (0)

DuMOHsmol 26/02/2018

But be careful with the landing legs! Not every frame will fit these. Kingkong 130GT doesn't, so I've had to cut the landing gear off.

4 PCS KINGKONG / LDARC Protection de capot de moteur universel avec pignon d'atterrissage pour les moteurs de la série 11 RC Drone

2,89€ 3,47€

0

Commentaires (0)

DuMOHsmol 26/02/2018

At first I was really skeptical about these rubber standoffs, but they do work indeed! Once I've mounted my FC on these, the gyroscope has finally stopped from getting mad on Z-axis. I only wish there were some cheaper bulk offers, I would rather buy more of these in one time!

4 PCS Realacc M3*7+4.5 Contrôleur de Vol Anti-Vibration Vis Fixées pour FPV de Course

8,59€ 9,30€

0

Commentaires (0)

DuMOHsmol 26/02/2018

None of the reviews does mention the weight, so here it this. This PDB turned out to be a little heavy for my 130mm build, so I haven't used it yet. The soldering quality seems to be fine.

Platine de distribution d'alimentation Lantian PDB avec sortie BEC 5V 12V 3A pour la version améliorée CC3C Naze32 pour drones RC de course FPV

10,74€ 11,16€

0

Commentaires (0)

DuMOHsmol 26/02/2018

Well, after replacing one broken motor, I found that these motors are quite fine! I still can't decide whether it was broken from the factory, or it was my fault, so I can't comment anything on the quality here. These motors seem to play fine with 3035x3 propellers and 3S battery, getting only slightly warm (but I haven't tested on full throttle yet, though). They also provide enough punch on 2S to make flying fun. Some people say that the shaft of these motors may back out, so I suggest drilling out the center hole on your propellers (a 1.6mm drill works perfectly). This way you won't apply force to the shaft when putting your props on and off.

Realacc Orange85 FPV Racer Pièce de Rechange 1106 6000KV 1-3S Moteur Brushless for RC Drone FPV Racing

8,36€ 8,97€

1

Commentaires (1)

DuMOHsmol 26/02/2018

The protectors are fine, but I wish there were no holes on the sides, as they clearly decrease the mud protection!

Protection noire pour moteurs universels KINGKONG/LDARC, 4 pièces, pour drones RC de la série 11

7,51€ 8,36€

0

Commentaires (0)