Meilleures offres pour Amplificateur,Soldering Station - Banggood France Achats en ligne

Arise

mon contenu: Tous les messages; Commentaires; Commentaires; réponses; Questions

Tous les messages

Récepteur FPV Eachine PRO58 RX Diversity 40CH 5.8G OLED SCAN VRX pour les lunettes FatShark

32,74€ 43,54€

Q: Is there a fee to upgrade pro58 to achilles?

demandé par BG122211120 sur 2021-07-09 09:14:49

Arise yes. is 10 euros if I remember right. if you want free then go for pirx firmware.

2021-07-10 07:40:24 Utile

Soumettre

réponses (3)

Arise 17/08/2018

Pictures with the shield removed. I can't measure the power with this thing, but I expect it to be over the EU limited less than 100mW (20dBm) of the RC transmitters. According to other people is capable of 200mW? It will not work (led will not go blue) unless the input antenna is connected to an input source. The marking on the chip is scrapped, but I believe is a SE2576L chip by Skyworks Solutions. Details about this chip here: http://www.skyworksinc.com/Product/953/SE2576L XQ-02A is a bi-directional signal amplifier module designed for the 2.4GHz band. Features automatic direction (send or receive) identification and switching. According to schematics, maximum output peak power is 2W, but I assume this is not the case of the current PCB. Maybe the voltages must be adjusted, judging by other reports this is doing about 200mW maybe? In my quick testing, connected directly to the TX, the chip is not getting hot, barely warm, so not sure if I need to do something else or the low temperature is maybe of the reduced power output.

Amplificateur de portée Lantian LT 2.4G DIY FPV 3-15V pour émetteur radio avec support d'extension de signal Wifi

24,70€ 26,04€

4

Commentaires (0)

Arise 21/06/2019

Very small, lightweight soldering iron. From time to time it can be snatched on various promotions for very good price. It supports custom firmware, but I feel the original works just fine for day to day task. The heat start up time is impressive, it can reach the desired 300 celsius in less than 15 seconds, but this depends on the power input source. It works only with DC5525 connector (I can use it with my laptop charger @19V or other chargers capable of 12V). Warning, DC5521 connectors - 2.1 internal diameter (which seems to be more usual) will not fit! In the package is only a sharp tip (not very useful for most tasks), a manual/leaflet, a small allen key, and the TS100 with a blue shell. Cons: You need to buy extra soldering tips. Those are not cheap. Considering you could end up buying about 3 extra tips, a holder, a sponge, charger/battery and a flexible silicone cable, you will end up paying its original value one more time.

MINI TS100 Interface programmable OLED numérique DC5525 Station de fer à souder Version saphir

60,13€ 69,25€

2

Commentaires (0)

Arise 21/06/2019

Very small (pocketable) multimeter. Nice to have in your tools bag. Cons: The beeper function is not on a dedicated rocker position. You need to do a button press to switch to beeping/continuity mode.

ANENG AN8008 Multimètre numérique à sortie d'onde True RMS courant alternatif et continu, tension, résistance, fréquence et capacité

22,04€ 31,63€

7

Commentaires (0)

Arise 26/06/2019

Small size LC Filter. The coil seems to be kinda small, so dont feel like to use it over 1A. Even 500mA, just to be safe.

2A 3-20V VTX LC Module Filtre de Puissance Pour Rotor Multi Rotor FPV RC

7,48€ 8,36€

2

Commentaires (0)

FS-RX2A Pro V1 2.4G Récepteur Compatible pour FS-I6 FS-I6X Émetteur FS-I6S FS-TM8 FS-TM10 FS-I10

17,19€ 18,60€

Q: is this compatible with Taranis QX7 ?

demandé par LONDONFOG sur 2019-06-20 03:49:49

Arise Rx2APro is a Flysky receiver, not a FrSky. The only way to make it work with a QX7 is using an external JR Bay module for Flysky installed in your transmitter, I suppose you don't have such thing in mind.

2019-06-24 12:53:54 Utile (1)

Soumettre

réponses (2)

Arise 17/08/2018

Active element about 26mm.

Antenne module FrSky 2.4G V8 Series 2dB

9,76€ 9,30€

1

Commentaires (0)

Arise 18/06/2018

Total capacitance: 327µF, there are 9 capacitors, each for approximately 36µF. Making the math between this (v1) and the other version with 10 caps (v2) gives 46µF which is way closer to the supposed 47µF per capacitor, so I assume maybe some of them are not that well within tolerances. But I would not consider this a problem in any way. MLCC caps are good for reducing noise in quadcopters, works best in conjunction with low ESR Electrolytic Capacitors. Instead of picking a huge ass 1000µF electrolytic, you can settle for a smaller one like 470µF electrolytic and a row of MLCC caps. I do not recommend going with MLCC only, always add an electrolytic.

Anti-parasite parallèle condensateur plaque capacitance support 1s-6s lipo pour mini esc

2,55€ 4,27€

4

Commentaires (1)

Arise 26/06/2019

1.13mm coaxial cable with Ipex connector. Useful to make your own antennas, size should be good for a lot of frequencies, including 868/915MHz.

Antenne réceptrice 10X 150mm 2.4G Port IPEX pour FRSKY JR

10,74€ 11,16€

0

Commentaires (0)

Arise 26/06/2019

Pigtail Ipex to SMA connector, decent length for most applications.

DANIU 5 pièces 15cm 5.9 pouces SMA vers IPEX RF câble adaptateur femelle avec capuchons rouges

9,66€ 10,23€

0

Commentaires (0)

Arise 26/06/2019

Small 0805 SMD capacitors, multiple values, useful for various projects and repairs.

720Pcs 0805 SMD Condensateur Céramique Assortiment Kit 1pF ~ 10uF 36 Valeurs 20 Chaque Kit D'Échantillons

7,43€ 14,88€

0

Commentaires (0)

Arise 26/06/2019

Small SMD capacitors, various sizes, useful for various projects and repairs.

320pcs 1206 SMD condensateur assorti kit 16 valeurs 20 chaque kit 10pF ~ 22uF échantillons Kit électronique Diy

0

Commentaires (0)

Arise 21/06/2019

Awesome diversity receiver. It can be used with any goggles that accepts external modules. Fast CPU inside, as a result it accepts custom firmwares like pirx and achilles.

Récepteur FPV Eachine PRO58 RX Diversity 40CH 5.8G OLED SCAN VRX pour les lunettes FatShark

32,74€ 43,54€

0

Commentaires (0)

Arise 21/06/2019

Small headers to make your own cables. Need to use an appropriate crimmper tool to make a perfect connection.

Connecteur femelle à tête longue Reed à broche femelle de 2,54 mm, 200 pièces

8,55€ 8,36€

0

Commentaires (0)

Arise 19/08/2018

You get the aluminium frame, the horizontal standoffs with the 2.5M screws, the bottom M2 screws, also in the bag is the LED bar (two leds on a tiny board, cant be bought separately), also the camera locking thing, it fits Runcam Micro Swift 1/2 and Micro Sparrow. This frame is for FPV Egg 136, it is not the same as the FPV Egg 100/130 which is supposed to work with smaller cameras like Runcam Nano only. This one will work with Micro Swift and Sparrow out of the box. Weight with original parts is 13g.

KINGKONG / LDARC FPV EGG 136mm RC FPV Racing Drone Pièce de Rechange 7075 En Aluminium Cadre Pièces

5,57€ 11,33€

1

Commentaires (0)

Arise 28/07/2018

A little bit unique 4 in 1 ESC, produced by FullSpeed. This company is focused on producing micro stuff, in 3 inch category or so. I don't trust this ESC to be capable of the 28A mentioned, but overall I like it because it has the battery pads on one side while the SH connector is on the other side of the board, so in some circumstances it could lead to a cleaner build. Also the battery pads are pretty generous, good contact, so for anybody that has problems soldering this should not be a challenge. Unlike other cheap 4 in 1 boards, this one also has a couple of ceramic capacitors (MLCC) to filter the noise. Obviously adding your extra low ESR electrolytic one can't hurt.

Full Speed FSD328 Flytower Partie 20x20mm 28A BLheli_S 2-4S DShot600 4 En 1 ESC Brushless pour Drone RC

39,75€ 41,86€

0

Commentaires (0)

Arise 28/07/2018

copper sheet, roughly cut with a metal scissor, could use some straightening.

0.5mm x 50mm x 50mm Copper Sheet Metal Plate

3,84€ 8,36€

0

Commentaires (0)

Arise 28/07/2018

copper sheet, roughly cut with a metal scissor, could use some straightening.

Feuille de tôle de cuivre pur à 99,9 % 1 mm * 100 mm * 100 mm

8,55€ 9,30€

0

Commentaires (0)