Meilleures offres pour Nouvelle jauge à onglets améliorée,Endoscope sans fil,Travail du bois

BG223516120 15/12/2020

Nice piece. Bronze handle is solid brass and so heavy. A little bit sharp knurling, but it's OK. That little lock plate to precisely set angles at the end of the tool has quite sharp edges, probably not finished at all. Also teeth on the curved scale piece are sharp to touch. One completely loose screw, that tiny one to level the fence was completely free and roaming around the package, and thank god it was not lost during shipment. Same as with with fence I bought with this (https://www.banggood.com/Drillpro-30x60x450mm-Aluminum-Box-Joint-Jig-Kit-For-Miter-Gauge-Woodworking-Tool-p-1400439.html) On the tip of the rail guide there is a plate at bottom to prevent it from lifting up off the t-track, but there is no such plate at the back. Yes, there is a handle so I should be able to keep an eye on this. Will see how it will work. It just arrived so I haven't tested it yet (no T-Tracks yet in table). Generally nice tool.

Nouvelle poignée en laiton pour jauge de coupe mise à niveau de la table/scie de la jauge de coupe de routeur assemblage de la jauge de coupe de sciage

52,10€ 93,04€

2

Commentaires (0)

BlitzWolf BW-YPC110 Endoscope sans fil 8 mm 2.0MP 1200P HD Caméra d'inspection de serpent endoscope WiFi 8 lumières LED réglables pour tablettes de téléphones intelligents iOS et Android

32,23€ 33,49€

Q: Waterproof cap .. does it mean that camera is NOT waterproof without it? And so if the cap is on, then not other tool like hook/magnet can be on as well?

demandé par BG223516120 sur 2020-12-29 08:13:17

kostya1133 в воду нельзя

2021-11-13 10:53:29 Utile (1)

Soumettre

réponses (3)

BlitzWolf BW-YPC110 Endoscope sans fil 8 mm 2.0MP 1200P HD Caméra d'inspection de serpent endoscope WiFi 8 lumières LED réglables pour tablettes de téléphones intelligents iOS et Android

32,23€ 33,49€

Q: How rigid is (will be) the cable ?

demandé par BG223516120 sur 2020-12-29 08:14:13

Osmac X Hi, I haven't used it for length yet . It's a cable, not a rod . I assume he can handle short distances without support . And it is according to individual needs

2021-03-25 07:13:09 Utile (1)

Soumettre

réponses (3)

BG223516120 30/11/2020

Red elox aluminum looks good and I hope it will not fall and so stays true. Fits easily other rulers or straight edges, however not all. Slot is some 38mm wide, so my 40mm rulers do not fit :-( I used calipers + other metal rulers to check the scale of provided 30 cm (back side in inches) and it seems to be correct. Casted body seems reasonably square (inner) and in 45/90/225 angle. Enough for center finding or raw angle measurements for general woodworking/timber-framing, I would think twice for using it for precise cabinet making of other fine woodworking. Seems not suitable for precise metalworking but to be fair it is not meant to be that kind of tool/precision grade. Magnet is strong enough to keep ruler in, but allows it to be easily removed or position adjusted without risk of body/ruler falling off even without knurled knob holding ruler being tight.

YX-3 Travail du bois Magnetic Center Scriber Finder 45 90 Degrés Angle Ligne Calibre Règle Métrique et Pouce Bois Mesure Scribe Outil

25,11€ 30,70€

1

Commentaires (0)

BG223516120 30/11/2020

Just arrived and looks good. Writes good. Will see how long it will last, as one of my permanent markers is with me for more then 5 years, while others did not last more than a year and dried out. Point seems sharp enough, but actual footprint, drawn line, seems like 0.7+ in thickness (bit wider on softer materials so it soaks a bit). I'd appreciate thinner line, like 0.5 or even 0.3. But that is still fantastic pen because of long tip to write through templates, as broken pencils/micropencils are simply point-less ;-)

20mm multifonction travail du bois longue plume marqueur stylo matériel bois marqueur de profondeur stylos

8,59€ 9,30€

1

Commentaires (0)

Drillpro Inclinomètre numérique miniature en acier inoxydable à 360 degrés Boîte de niveau électronique Base magnétique Outils de mesure

26,97€ 42,79€

Q: Is it waterproof (what's IP rating) ?

demandé par BG223516120 sur 2020-11-30 01:13:16

BG852143701 Ithink isn't waterproof.

2021-02-26 04:57:14 Utile (1)

Soumettre

réponses (1)

BG223516120 15/12/2020

Thanks to aluminum profile and oval holes in miter it fits to miter gauge quite well. I was a bit worried about this and especially miter gauge and tip of it's rail guide rod as package was a bit squashed at the corner, but it seems OK. Few screws were way too loose and one completely free flying inside package. So assembly could be better and more careful.

Ensemble de gabarits Wnew pour joint de boîte en aluminium de 30x60x450mm, pour scie sur table de routeur pour outils de travail du bois

40,93€ 65,12€

3

Commentaires (0)

BG223516120 15/12/2020

Base is hair under 11cm, so it's more like ruler then square. Knurled nuts are a bit loose so it offers ability to make it true, but it's not true from factory, pay attention to it. Mine came with a bit sharp bend close to the end, see photos, not sure where it happened. Otherwise it is fine cut ruler, with tiny increments. Ballpoint 0.5 do not fit, but I use micro-pencils or knives anyway (knife might not be right option here).

Règle de positionnement de trou en acier inoxydable de précision Drillpro 200/300/400 mm. Règle de mesure pour le travail du bois. Outil de marquage.

16,74€ 22,32€

2

Commentaires (0)

BG223516120 11/11/2020

Looks well built and adequate to the price. Anodized aluminum slides well. Bronze curl knobs fit to fingers. Nothing too sharp to touch. Smooth precise surfaces and color coded sliders. Bonus, it came in little metal box with foam inlay. I'll just cut there two incline points for better grip when polling tool out. But it's good that I can cut/make them whenever it fits to me. Good tracking of the package. Enough info sent from shop about delivery statuses when they changed. Swift delivery from some local in-country storage (delivered in just 2 days). Tracking overshoot (came earlier then expected) delivery date (which was set with time precision to seconds :-) ), but it's far better then delayed delivery, for sure. Good service so far.

Drillpro Table Scie Ajusteur De Fente Outil Mortaise Et Tenon Outil De Bloc De Mesure Mobile De Travail Du Bois

26,66€ 33,01€

1

Commentaires (0)

Ensemble de 12 fraises en carbure de tungstène de 8 mm de diamètre pour travailler le bois, avec coffret en bois de Drillpro

32,23€ 33,49€

Q: What is the difference between Drillpro router bits in red, yellow, blue, green and black color ? Those seems to me pretty similar, so I'm a bit confused.

demandé par BG223516120 sur 2020-12-26 03:03:37

Katydid It's just the outer coating color is different, the material is no different.

2021-01-06 06:34:06 Utile

Soumettre

réponses (1)

Charnière dissimulée en acier inoxydable Charnière de porte en forme de bouche de poulet en forme de 7, matériel rotatif à 360 degrés

6,44€ 7,43€

Q: What are all dimensions of both L and S size?

demandé par BG223516120 sur 2020-12-29 08:37:52

Soumettre

réponses (0)

BG223516120 28/12/2020

Nice AL extrusions, expected quality. However I would recommend to seller to improve packing or to buyer to purchase those in a bigger quantities, so those will support each other in transit. As smaller t-tracks I purchased before had bubble-wrapped ends. But those bigger ones came just in tiny miralon + heavily wrapped to just plastic bag + tiny caps. Yes, thankfully, they had extra plastic thin end-caps, which probably saved them, as those end-caps came shattered partially and saved corners a bit. One another thing I'd like to is to purchase those in longer variant, as 1m seems to be a maximum, but with 1200mm there will be more useful offcuts from those. Otherwise it seems they came without any visual bending. Going to workshop to check and mount them into table.

Drillpro 100-1200mm Rainure en T pour gabarit de piste Raccord de rainure 30x12.8mm Pour scie sur table Table de routage Outil de menuiserie

11,16€ 12,09€

0

Commentaires (0)

BG223516120 21/12/2020

Looks solid and pretty adjustable (same as miter jig). Predrilled holes are threaded. Sliding disks on both ends to prevent mi jigs and sleds from popping out of track. Just arrived, and so not mounted into anything yet. but can't wait to do so.

Barre de glissière de fente en T 300mm 450mm pour scie circulaire de table en bois

15,04€ 15,81€

0

Commentaires (0)

BG223516120 15/12/2020

Nice finish and square according to DIN square.

VEIKO 2 Ensemble d'équerres de serrage de précision pour travail du bois avec support auxiliaire en forme de L

37,21€ 46,51€

0

Commentaires (0)

BG223516120 15/12/2020

Looks good and ordered in qty:3 in hope that they'll not come bended if bundled in pack. And it came OK.

ENJOYWOOD Rainure en T 300-1220mm T-Piste Boulon en T Gabarit de Fente 19x9.5mm Pour Scie sur Table Table de Routeur Outil de Menuiserie

11,16€ 18,60€

0

Commentaires (0)

BG223516120 10/12/2020

Finally and silently landed in my mailbox, today. Packed just in plastic bags and tiny bit of bubble sack. A bit rough grind on the facets of the reamer, but generally looks good. Not tested yet.

Outil de menuiserie Drillpro conique à six rainures pour chanfrein à main de 3-13 mm pour trou de fixation de pont à poignée en forme de T

11,81€ 13,02€

0

Commentaires (0)

Geekcreit® 2500W 48V 50A Module de Chauffage à Induction ZVS Haute Fréquence Machine de Fusion de Bobine Métallique Avec Alimentation Complète

246,10€ 306,11€

Q: Hi why the power supply even without load gives me the red light and has no power? Who can help me

demandé par BG215591013 sur 2020-12-01 05:02:52

BG223516120 I think I seen (nor big&red enough) warning in the text above to NOT turn power supply without any load, and some comments that it will not work OK and break itself.

2020-12-03 08:13:30 Utile

Soumettre

réponses (1)