Meilleures offres pour Sans balais,Avion RC - Banggood France Achats en ligne

Brunswick83

mon contenu: Tous les messages; Commentaires; Commentaires; réponses; Questions

Tous les messages

Brunswick83 18/08/2020

Good motor, but who designed the mounting bracket so that the screws that go into the firewall are blocked by the body of the motor? Ridiculous.

Moteur brushless RC Racerstar BR4250 800KV 3S-7S Support 11*5,5 Hélice pour avion RC à aile fixe et drone

22,37€ 32,63€

7

Commentaires (1)

Brunswick83 25/02/2020

The quality of the kit is very high, with accurately cut parts and well designed structure. All the parts referred to in the instructions are included (in fact a couple left over eg two surplus wheel spokes). However: It is very intricate and hence time consuming to build. Probably not recommended as a first model aircraft build project. Bending the balsa around the fuselage is difficult and much of the time there is no convenient way of clamping the pieces. Also, some of the cross members are extremely fragile (see first photo) and very easily broken. They can be glued together again though. The instructions are pretty good, but the build still requires careful planning eg don't fit the cowl until the motor is installed, as the motor mount offsets the motor to the right and the cowl has to match that angle. Also, the spinner and cowl come as one piece and the instructions don't give any guidance on how to separate them. On the issue of the spinner, I bought a 2216 motor, but it is way too long and there is a big gap between the spinner and cowl. With a 2212 and a small prop adaptor, the gap is still there, but much smaller. A photo of the finished model is included. I haven't flown it yet as I'm waiting for perfect weather for a maiden flight. I'm very pleased with how it looks. It might end up as a non flying display model.

Dancing Wings Hobby Deperdussin Monocoque 1000mm Envergure Balsa Bois RC Avion Kit

114,32€ 119,29€

14

Commentaires (2)

Brunswick83 27/03/2021

Very simple, but works well and is a lot cheaper than some similar products.

Testeur d'équilibrage d'hélice magnétique universel plus long pour modèles RC

25,99€ 27,00€

0

Commentaires (0)

Brunswick83 27/03/2021

Good product. The mounting bracket fits the Ender-3 V2, cable is long enough to reach the mainboard and it works well. I used Smith 3d firmware and had the installation complete and working in about an hour.

Kit amélioré Creality 3D® Ender-3 V2 avec capteur de nivellement automatique BL Touch pour imprimante 3D

50,90€ 56,26€

0

Commentaires (0)

Brunswick83 07/01/2021

Parcel was delivered to my neighbour by Aramex, despite being correctly addressed. I was home when it was delivered, but didn't know it was there until I happened to see it on the neighbour's front porch. Lucky it wasn't stolen. Haven't built the model yet. Banggood processed the shipment quickly and competently.

Avion biplan PT-17 Hookll avec une envergure de 1200 mm en kit/pnp. Modèle réduit d'avion à ailes fixes agrandi

269,63€ 281,36€

0

Commentaires (0)