These wheels worked for my wpl truck. 3d printed parts are not the best quality. Some of the holes were too big for the screws because of print quality. Came with all the hardware needed to install even screws. Overall good product. Would like to have 3d print files to reprint items that were not so great.

These wheels worked for my wpl truck. 3d printed parts are not the best quality. Some of the holes were too big for the screws because of print quality. Came with all the hardware needed to install even screws. Overall good product. Would like to have 3d print files to reprint items that were not so great.

These wheels worked for my wpl truck. 3d printed parts are not the best quality. Some of the holes were too big for the screws because of print quality. Came with all the hardware needed to install even screws. Overall good product. Would like to have 3d print files to reprint items that were not so great.

1. One of the 3D printed rear ear's broke off when I tried to install it. OK, checked the to see if there would be a clearances issue, if I super glued both of them on. No problem.... 2. Installed the front 3D parts, along with the front & back tracks. Releativly no problems. When I tried to test it, just made a bunch of noise. From the nylon axle hubs, just spinning inside the track hubs. I used Masking tape to wrap around the axle hubs. However, I have to remove it, to use the wheels.

1. One of the 3D printed rear ear's broke off when I tried to install it. OK, checked the to see if there would be a clearances issue, if I super glued both of them on. No problem.... 2. Installed the front 3D parts, along with the front & back tracks. Releativly no problems. When I tried to test it, just made a bunch of noise. From the nylon axle hubs, just spinning inside the track hubs. I used Masking tape to wrap around the axle hubs. However, I have to remove it, to use the wheels.

1. One of the 3D printed rear ear's broke off when I tried to install it. OK, checked the to see if there would be a clearances issue, if I super glued both of them on. No problem.... 2. Installed the front 3D parts, along with the front & back tracks. Releativly no problems. When I tried to test it, just made a bunch of noise. From the nylon axle hubs, just spinning inside the track hubs. I used Masking tape to wrap around the axle hubs. However, I have to remove it, to use the wheels.

Для замены обычных колес машинки WPL и повышения проходимости. Требует замены стокового мотора на более мощный

Для замены обычных колес машинки WPL и повышения проходимости. Требует замены стокового мотора на более мощный

Для замены обычных колес машинки WPL и повышения проходимости. Требует замены стокового мотора на более мощный

para mi wpl b1 y c24

para mi wpl b1 y c24

para mi wpl b1 y c24

lil

lil

lil

La piste est faite d'un caoutchouc très doux. Le porte-avions semble solide. Il y a des limiteurs qui empêchent la piste de tourner. Il semble que je vais avoir besoin d'apporter des modifications pour le faire correspondre. Je ne sais pas à quel point ils vont bien travailler et tenir le coup. Le temps nous le dira.

The track is made of a really soft rubber. The carrier seems sturdy. There are limiters that keep the track from spinning around. It looks like I will need to make modifications to get it to fit. I don't know how well they will work and hold up. Time will tell.

La piste est faite d'un caoutchouc très doux. Le porte-avions semble solide. Il y a des limiteurs qui empêchent la piste de tourner. Il semble que je vais avoir besoin d'apporter des modifications pour le faire correspondre. Je ne sais pas à quel point ils vont bien travailler et tenir le coup. Le temps nous le dira.

bien

good

bien

Ça a l'air bien. pas encore essayé

looks good. not tryed yet

Ça a l'air bien. pas encore essayé

Good for WPl crawlers

Good for WPl crawlers

Good for WPl crawlers

Cobbled together a half track

Cobbled together a half track

Cobbled together a half track