Une partie de la critique a été traduite automatiquement.
Total capacitance: 373µF (not 470µF like they say on the back), there are 10 capacitors, each for approximately 37µF. Making the math between this (v2) and the other version with 9 caps gives 46µF which is way closer to the supposed 47µF per capacitor, so I assume maybe some of them are not that well within tolerances. But I would not consider this a problem in any way. MLCC caps are good for reducing noise in quadcopters, works best in conjunction with low ESR Electrolytic Capacitors. Instead of picking a huge ass 1000µF electrolytic, you can settle for a smaller one like 470µF electrolytic and a row of MLCC caps. I do not recommend going with MLCC only, always add an electrolytic.
Basic capacitor for quadcopter builds. Heatshring is provided and also nice silicone wires. I can recommend.
Ustensiles
выглядит хорошо в работе не пробовал
Waste of money, better buy low ESR standard capacitor.
J'ai remplacé mon condensateur et c'est parfait. Aucun parasite dans l'OSD. C'est plat et plus facile à positionner qu'un condensateur.
Livraison rapide, pas de voie par le rf. Je prends une deuxième fois, je travaille très bien sur l'aile et dans l'avion
Not tested yet
Should be good replacement for bulky caps but supplied wires are really thin so I need to check if one is as good as regular low esr cap.
Does really as low esr cap with an awesome size. As good as a 1000uf cap