Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (54)
  • Image (2)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(54)
    • 5 Étoile(47)
    • 4 Étoile(5)
    • 3 Étoile(1)
    • 2 Étoile(0)
    • 1 Étoile(1)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (France)
|
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 14/09/2015

    My first order arrived with one end of the balsa pack broken through and so was unusable. Commendably Banggood Customer Service sent a new kit but unfortunately didn't use any better protection other than some soft foam wrapping and a plastic bag. It was also damaged in the post but I managed to build a plane from the good parts of the two kits. The packaging only needs a piece of stiff card either side of the balsa to protect it from bending and maybe a Do Not Bend sticker on the outside to solve this problem. I found that the kit went together really well. The parts are cut really accurately and without using any jigs, pins or tape, I was able to assemble the air-frame in a couple of hours just using super glue. And due to the good design of the interlocking parts, it is automatically square. My frame weighs 14.5g so I estimate with the electronics (a Hisky HW400 brick and motor/prop) the all up weight should be less than 30g. So I think it should fly OK. Probably only indoor or on very calm days outside. I would like to see Banggood stock more balsa kits if they can only sort out the packaging problem.

    Commentaires (1)
    Afficher l'original
  • 14/02/2017

    Everithing fits perfectly > it is easy to assamble. Just the picture in the manual are a bit small > take some time and line up the parts correctly (I had to cut of the motor mount plate again because I glued it 180' twisted. I am using a f939 elevtronic with a extra 1,7g servo (I will try to give the plane ailerons. With a servo in the middle and a z wire to the aileron). as motor I use the Gearbox and 7mm Coreless CW Motor For RC Models DIY which fits perfectly. I will see how the ailerons are working and maybe write a revew again.

    Commentaires (3)
    Afficher l'original
  • 28/12/2016

    Pretty challenging DIY kit. With some help from dad well suited for Kids. In our case the 10 year old son was able to assemble proudly a nice "old Fashion Wood kit". A perfect alternative in todays times with far too many Computer games in Kids lifes. A RC conversion might follow in the future. Here it would be helpful from Banggood to offer a complete set of electronics including everything.

    Commentaires (1)
    Afficher l'original
  • 31/07/2017

    This kit arrived in good shape. I'm still building it as you can see in the pictures. The parts are fitting well together. It's a pleasure to put together. No sanding is needed due to the good laser cut. The only downside is the motor/gear/propeller side which is hard to purchase...

    Commentaires
    Afficher l'original
  • 04/06/2017

    GREAT LITTLE BALSA AIRPLANE. BE CAREFUL WHILE BENDING TOP OF FUSELAGE, SOAK IT FIRST IN WATER 2 HOURS, DRY IT OFF, THEN IT WILL BEND EASILY. BE SURE TO LAY OUT WINGS SO YOU DON'T MAKE TWO LEFTS OR RIGHTS!!! GLUE ON RIBS THE WHOLE DISTANCE TO FORM WING PROPERLY, INSTALL SERVOS WHILE BUILDING FUSELAGE, HOOK UP LINKAGE, YOU CAN CUT IT DOWN LATER. THE CONTROL HORNS MAY NEED A LITTLE MORE BORING, DO THAT FIRST WITH A CONE SHAPED DREMEL BIT. THE LASER CUT MODELS ARE THE BEST. GUILLOW'S MODELS ARE LASER CUT TWO, MORE FOR YOUR MONEY...

    Commentaires
    Afficher l'original
  • 10/02/2017

    The air plane kit consist of four 1/32 balsa sheets, one 1/16th, and one lite ply with laser cut parts . The wood appears to be light weight and extra care needs to be given during the assembly process. The assembly instruction are downloaded from the Banggood website and appear to be adequate to finish the model. These picture instructions do include information mounting the motor, electronics and elevator and rudder control horns. The location of the Center of Gravity is lacking from the instructions and the builder will have to determine its location. Over all, it appears to be a great kit that should reward the builder with a fine flying model.

    Commentaires
    Afficher l'original
  • 04/04/2017

    I built and flew one last year and ordered 3 more as soon as they came back in stock

    Commentaires
    Afficher l'original
  • 09/09/2016

    Excellent great like park flyer ideal for those just starting out or the older generation great fun to be had from this amazing little plane

    Commentaires
    Afficher l'original
  • 12/01/2016

    After reading the reviews I thought they would have the packaging sorted as they state as much with other buyers that had the damage issue. why is there no support in the packing to avoid this! it is a very nice kit that would justify the use of cardboard to keep this from happening. Not real impressed as this is my first Banggood purchase.

    Commentaires
    Afficher l'original
  • 10/05/2017

    Look great and easy to put together... waiting on the electrics that I have just ordered.

    Commentaires
    Afficher l'original
Show:

    Total 0 pages

    Aller à la page

    recommendation for you
    • 17,47€
    • 20,74€
    • 18,38€
    • 74,49€
    • 67,13€
    • 66,21€
    • 68,05€
    • 15,92€
    • 164,63€
    • 31,72€
    • 114,95€
    • 100,25€
    • 68,05€
    • 110,36€
    • 82,76€
    • 77,25€
    • 64,37€
    • 62,44€