Une partie de la critique a été traduite automatiquement.
Well thought out kit with nicely cut parts. 3D printed motor mount. Would be a bonus if the stl file is available. Only negative is that the one sheet, photocopied instructions are only Chinese. The parts fit together well and will make a good sub 250g wing. Could easily fit an AIO FPV camera on the front. Recommended.
nice epp lots of carbon, only thing where is the COG?
Grande aile facile à monter très stable, si l'utilisation de la batterie 550 et 850 n'a pas besoin de rechercher CG et la batterie que j'utilise mouches beaucoup était avec cette batterie 550 et 850, juste prendre soin de ne pas voler où beaucoup de vent peut vibrer ou flambar, tou satisfait
Plan Exelent pour un débutant. La construction a pris 10 minutes. Ça a l'air plutôt solide. Utilisé un micro esc, 12a esc, 2280kv Racestar, 3 lame 4 pouces prop, 800mah 2s et il vole bien rapide et lent. mais un peu sous-alimenté. Couper l'aile avec un couteau pour réduire la traînée. Besoin de peindre un côté pour aider à l'orientation
Great little wing flys great as suggested although I have modded with an all in one Eachine TX06, smooth flying on an 1806 motor with a 5045 tri blade prop and a 20a esc powered by a 800mAh 2s lipo or a 550mAh 3s lipo 12-15 minute flight times with plenty of mAh to spare.all up weight well under the dreaded 250g, Its alot of fun and very inexpensive, a great way to spend a lazy afternoon to do some fpv cruising. I highly reccomend.
Very nice EPP plane, lots of carbon plus decent 3d printed mount. Properly painted to.
Perfekt parc volant lent, très robuste!
Bon emballage. Kit simple mais correct
https://www.youtube.com/watch?v=edviFjZatoE
Il s'agit de débutants amicaux avec un poids léger