Boîte de jonction étanche IP66 SONOFF® Boîtier étanche Coque résistante à l'eau
Une partie de la critique a été traduite automatiquement.
Je donnerais 6 étoiles à cette petite boîte si je pouvais ! Qualité EXCELLENTE, bien fabriqué, pas de défauts dans la finition, résistant aux intempéries et je ne trouverais jamais cela dans mon pays facilement, donc merci! Celui-ci va protéger ma station météo personnelle NodeMCU.
Boîtes solides de bonne qualité. Besoin d'un peu de soin d'ajuster le caoutchouc au couvercle: La longueur est correcte si elle est bien ajustée, mais si vous la trouvez un peu courte, il suffit de tirer et de réaménager avec une très légère tension. Les glandes s'adaptent à des câbles de 2,5 à 6 mm de diamètre.
Very nice box and well waterproof. It does hold the Sonoff basic with the housing although it could have been a bit larger. Especially if you use thick wires like I did. Nonetheless it suits the purpose and I could mount the switch in my garden!
I use it for my modules in damp rooms and it works great. it is too small for the Sonoff TH10 and TH16 modules but perfect for the DIY modules
Acheté pour l'utilisation dans le cadre de l'enseignement à mes enfants sur les énergies renouvelables. J'en ai eu 2 dehors dans le vent et la pluie depuis plus d'un mois sans aucun problème. Je rachèterai pour d'autres projets.
Excellent... 👍
i prodotti sonoff sono i migliori.
Nice box but did not expected that it is so small. For comparison I have a sonoff power module. I needed to remove it from case to fit it inside.
The overall quality is pretty good actually and I loved the addition of the silicone filler. The big problem is that it's extremely difficult to mount a POW/Dual/TH series board in this case as there is no room at the end for the incoming wires. I think the design could be improved by either lengthening the box to accommodate the wires or alternatively, locate the holes for the glands at the other end. I'm going to patch the pre-made existing holes and make new ones on the other end or even on one side.
If you use a 16A capable cable then the outer insulation won't fit inside the sealing tube. However you can always strip the outside insulation, this way the live, neutral and earth cables will tightly gripped by the box.