it's REALLY TINY. works fine with DSMX. p.s. only receives 5 channels.

it's REALLY TINY. works fine with DSMX. p.s. only receives 5 channels.

it's REALLY TINY. works fine with DSMX. p.s. only receives 5 channels.

I like these small and compact DSM2/DSMX receivers cause they work on 3.3 and 5 volt. Small for micro builds. The antenna could be secured a bit better and they can break off in a crash so mount the receiver well and protected. Over all great for the price and I have not had range issues on any of my micro builds

I like these small and compact DSM2/DSMX receivers cause they work on 3.3 and 5 volt. Small for micro builds. The antenna could be secured a bit better and they can break off in a crash so mount the receiver well and protected. Over all great for the price and I have not had range issues on any of my micro builds

I like these small and compact DSM2/DSMX receivers cause they work on 3.3 and 5 volt. Small for micro builds. The antenna could be secured a bit better and they can break off in a crash so mount the receiver well and protected. Over all great for the price and I have not had range issues on any of my micro builds

Best Receiver I’ve used 👍

Best Receiver I’ve used 👍

Best Receiver I’ve used 👍

Using this on a new Emax Babyhawk. Can't get it to bind as DSMX, my DX-8 only binds it as DSM2/22ms (1024) but this could be the DX-8, it is running 3.01 software. One tip is I had to hold the DX-8 about 2 metres away during binding. The MOY runs on 3.3 to 5.5V so connection is simple. In Betaflight you need to set it up as Spektrum 1024 and SBUS as the provider. Another tip is sometimes Betaflight doesn't seem to show the device connected in the receiver dialog. It shows the channels but not the bars. Trick here is to ensure that the Low/Mid/High values aren't zero, Set them to something like 1200/1500/1800 and the "bars" then appear. Range is good. I was flying ~50m away on FPV. Seems like good value.

Using this on a new Emax Babyhawk. Can't get it to bind as DSMX, my DX-8 only binds it as DSM2/22ms (1024) but this could be the DX-8, it is running 3.01 software. One tip is I had to hold the DX-8 about 2 metres away during binding. The MOY runs on 3.3 to 5.5V so connection is simple. In Betaflight you need to set it up as Spektrum 1024 and SBUS as the provider. Another tip is sometimes Betaflight doesn't seem to show the device connected in the receiver dialog. It shows the channels but not the bars. Trick here is to ensure that the Low/Mid/High values aren't zero, Set them to something like 1200/1500/1800 and the "bars" then appear. Range is good. I was flying ~50m away on FPV. Seems like good value.

Using this on a new Emax Babyhawk. Can't get it to bind as DSMX, my DX-8 only binds it as DSM2/22ms (1024) but this could be the DX-8, it is running 3.01 software. One tip is I had to hold the DX-8 about 2 metres away during binding. The MOY runs on 3.3 to 5.5V so connection is simple. In Betaflight you need to set it up as Spektrum 1024 and SBUS as the provider. Another tip is sometimes Betaflight doesn't seem to show the device connected in the receiver dialog. It shows the channels but not the bars. Trick here is to ensure that the Low/Mid/High values aren't zero, Set them to something like 1200/1500/1800 and the "bars" then appear. Range is good. I was flying ~50m away on FPV. Seems like good value.

Small, Campact and easy to use. Perfect for miceo Qwad builds and binds to my dx6e no problem!

Small, Campact and easy to use. Perfect for miceo Qwad builds and binds to my dx6e no problem!

Small, Campact and easy to use. Perfect for miceo Qwad builds and binds to my dx6e no problem!

Works Perfectly with 5V and Sbus protocol Be carefull, it doesn't works with 3.3V like Spektrum Satellite

Works Perfectly with 5V and Sbus protocol Be carefull, it doesn't works with 3.3V like Spektrum Satellite

Works Perfectly with 5V and Sbus protocol Be carefull, it doesn't works with 3.3V like Spektrum Satellite

don't bind with DSMX2, Spectrum DX8 Gen2 :-(

don't bind with DSMX2, Spectrum DX8 Gen2 :-(

don't bind with DSMX2, Spectrum DX8 Gen2 :-(

alles bestens, gerne wieder

alles bestens, gerne wieder

alles bestens, gerne wieder

MERCI

MERCI

MERCI

Danke Lieferung hat etwas gedauert aber alles OK

Danke Lieferung hat etwas gedauert aber alles OK

Danke Lieferung hat etwas gedauert aber alles OK