Reviews des clients

4.94 sur 5
Ecrire un commentaire
  • Tous les Commentaires (17)
  • Image (5)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(17)
    • 5 Étoile(16)
    • 4 Étoile(1)
    • 3 Étoile(0)
    • 2 Étoile(0)
    • 1 Étoile(0)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
  • Justin
    2020-07-06 14:42:35

    Excellent little plane! This is my second one as I have bought two for both sons to learn to fly. It goes together great. The first one I used all the recommended accessories but I found the 5G recommended servos did not fit the plastic servo tray without major cutting and sanding. For the second plane I used the recommended motor and ESC but for the servos I purchased a pair of K-power P0043 4.3g servos. They dropped into the mount easily without any cutting or modifying. They are slightly smaller

    Commentaires (1)
  • 2020-06-04 20:16:16

    the plastic parts are 3D printed not molded. the main piece that holds the servos is a horrible design. no 5g servo will fit without significant cutting and hacking. the rest of the plane went together well, there are no instructions. I found some picture instructions for it on another site selling it. the CG is too far aft. By the 30% chord rule the cg should be 2 5/16” from the leading edge which balances perfectly with a 2s 1000 and the recommended motor. I have not flown it yet because I’m

    Commentaires (1)
  • 2020-07-26 22:43:00

    IT IS OK

  • 2019-10-27 10:22:34

    Great little plane. Using a Detrum RXC7 Receiver, a Sonic 1806 2400kv motor, a Flycolor Fairy 30 amp ESC and a Tartu 800mAh 2 cell 45c battery, total overkill but but works great.... check it out.

    Commentaires (1)
  • 2019-08-17 09:49:47

    super avion pour débuter

  • Justin
    2020-06-05 12:48:08

    Great little plane to build. really accurate and easy to do. took me less that 2 hours. I purchased the recommended servo’s, ESC, motor and props. The only issue I found was that the recommended servo’s don’t fit out of the box! I had to cut away at the servo mount quite a bit to get them sorted. This took more time than the whole aircraft to build! Either the servo box needs modifying or the correct servo’s recommended. Otherwise a great little plane but I have not got to fly it yet.

  • Bud
    2020-03-29 16:04:49

    Easy kit to build except the recommended servos are too big to fit the servo tray. Had to cut down the servos and the plastic tray to install the servos. The pushrod wires were too stiff and too large to fit inside the carbon rod fuselage. Had to install one pushrod outside the fuselage

  • Wiktor
    2020-10-21 03:44:06

    Arrived undamaged. As models go this one looks quite primitive, lika something you could build yourself. But it's pretty thought out. The wing area is pretty big compared to it's size, so in a light build it should be a really nice, slow flyer.

  • 2020-05-26 13:47:44

    maybe a fc will fit 90 degrees ? nice little plane strong small will fpv. see tommyboytomsters YouTube coming soon review video

  • 2020-10-02 13:18:09

    Ware in Ordnung. Danke


    Go to page


    Vous pourriez être intéressé par

    recommendation for you
    • 22,94€
    • 17,46€
    • 59,48€
    • 36,19€
    • 19,46€
    • 57,99€
    • 20,39€
    • 64,57€
    • 48,43€
    • 35,70€
    • 48,35€
    • 81,49€
    • 58,63€
    • 19,97€
    • 117,27€
    • 61,95€
    • 106,14€
    • 8,49€