Livrer à United Kingdom , USD
Top Avis positif pour %s sur Banggood, Achetez le meilleur %s avec le prix le plus bas sur Banggood. Parcourez l'avis positif le plus utile pour %s avant d'acheter., jouets rc, sports amusants, mode, électronique populaire
rtrouvin 15/02/2017
Radio interference problem ! I modified the led lamp to have an effective electromagnetic shielding. Connect by welding a lead wire from the ground to the radiator and change the screw by a conductive screw by removing the paint on the heatsink. It's simple but should be done original!
Commentaires (4)
  • Holsen I've got massive interference, but only at low beam! So this could be very interesting knowledge, but to get it right I have a few questions.1: You've changed the small socket screw to a headed bolt and removed the paint underneath the head, to make contact between the "silver" unit containing the LED plus electronics and the heatzink?2: You've attached a wire from the ground connection on the 3 wire from car to bulb and soldered the other end to a screw jammed into the heatzink?

    Répondre 07/03/2017
  • romaniuk2 So do you have problem with buzz (hum) on radio and you solve it by this steps?

    Répondre 10/03/2017
  • rtrouvin Q1: yes yes

    Répondre 10/03/2017
  • rtrouvin Q1: yes as this: yes as this:

    Répondre 10/03/2017
Enquête de Satisfaction

Téléchargez l'application pour obtenir une exclusivité 10% off coupon