I am not happy with this Item as it burnt out as soon as I plugged it in to power. I am also not happy with trying to send a picture of this item as it keeps saying that the picture file is too large so this is the only way that I can think of telling Banggood my problem. can you please get back to me with this problem as I do buy products from you regularly.

I am not happy with this Item as it burnt out as soon as I plugged it in to power. I am also not happy with trying to send a picture of this item as it keeps saying that the picture file is too large so this is the only way that I can think of telling Banggood my problem. can you please get back to me with this problem as I do buy products from you regularly.

I am not happy with this Item as it burnt out as soon as I plugged it in to power. I am also not happy with trying to send a picture of this item as it keeps saying that the picture file is too large so this is the only way that I can think of telling Banggood my problem. can you please get back to me with this problem as I do buy products from you regularly.

Temperature regulation in not very aacurate. But still usefull tool. Not much inside.

Temperature regulation in not very aacurate. But still usefull tool. Not much inside.

Temperature regulation in not very aacurate. But still usefull tool. Not much inside.

léger, bon en main, bon choix pour ce prix. Soyez prudent avec la tentation, "ce que vous définissez n'est pas que vous obtenez". Les valeurs à la fin des pointes sont de 50°C de plus! : ce n'est pas une température contrôlée mais une puissance contrôlée. Achetez avec le "4pcs 900M I IS K KU souder Tips Set" (https://www.banggood.com/4pcs-900M-I-IS-K-KU-Soldering-Iron-Tips-Set-Soldering-Station-Consumables-Kit-for-936-p-1207942.html?rmmds=search&cur_warehouse=CN ) J'ai un ensemble complet de conseils!!

light, good in hand, good choise for this price. Be careful with the tempeture, "what you set isn't that you get". Values at the end of the tips are 50 °C more ! : it's not controlled temperature but controlled power. Buy with the "4pcs 900M I IS K KU Soldering Iron Tips Set" (https://www.banggood.com/4pcs-900M-I-IS-K-KU-Soldering-Iron-Tips-Set-Soldering-Station-Consumables-Kit-for-936-p-1207942.html?rmmds=search&cur_warehouse=CN) I have a complete set of tips !!

léger, bon en main, bon choix pour ce prix. Soyez prudent avec la tentation, "ce que vous définissez n'est pas que vous obtenez". Les valeurs à la fin des pointes sont de 50°C de plus! : ce n'est pas une température contrôlée mais une puissance contrôlée. Achetez avec le "4pcs 900M I IS K KU souder Tips Set" (https://www.banggood.com/4pcs-900M-I-IS-K-KU-Soldering-Iron-Tips-Set-Soldering-Station-Consumables-Kit-for-936-p-1207942.html?rmmds=search&cur_warehouse=CN ) J'ai un ensemble complet de conseils!!

This iron heats up fast and is very similar to the Hako brand. The grip is very comfortable and the heat is adjustable from 200-450 deg Celsius. I got the US edition and it came with the US plug attached ready for 110V. 5 Extra tips are also included.

This iron heats up fast and is very similar to the Hako brand. The grip is very comfortable and the heat is adjustable from 200-450 deg Celsius. I got the US edition and it came with the US plug attached ready for 110V. 5 Extra tips are also included.

This iron heats up fast and is very similar to the Hako brand. The grip is very comfortable and the heat is adjustable from 200-450 deg Celsius. I got the US edition and it came with the US plug attached ready for 110V. 5 Extra tips are also included.

Quickly heats up. Temperature control but rather power works but the scale on the dial has nothing to do with reality.

Quickly heats up. Temperature control but rather power works but the scale on the dial has nothing to do with reality.

Quickly heats up. Temperature control but rather power works but the scale on the dial has nothing to do with reality.

It's not temperature adjustment, but power adjustment, but still it's good enough. It's plenty powerful I even need to use it only on 1/3 power and it heats up very quickly. I'm very happy with the tips they work very well. For sure great value for money. It feels bit flimsy (i hear wiggling something when I move my hand around), but works very solid. Probably the best budget soldering iron to start soldering with.

It's not temperature adjustment, but power adjustment, but still it's good enough. It's plenty powerful I even need to use it only on 1/3 power and it heats up very quickly. I'm very happy with the tips they work very well. For sure great value for money. It feels bit flimsy (i hear wiggling something when I move my hand around), but works very solid. Probably the best budget soldering iron to start soldering with.

It's not temperature adjustment, but power adjustment, but still it's good enough. It's plenty powerful I even need to use it only on 1/3 power and it heats up very quickly. I'm very happy with the tips they work very well. For sure great value for money. It feels bit flimsy (i hear wiggling something when I move my hand around), but works very solid. Probably the best budget soldering iron to start soldering with.

размер паяльника 18см. лёгкий, удобно ложится в руку.нагревается быстро.при включении загорается светодиод.регулятор нагрева работает нормально.качество материала на первый взгляд даже не плохое.в нагрузку к паяльнику положили переходник,хотя он вставляется в розетку и без переходника.я пока доволен.Спасибо!

размер паяльника 18см. лёгкий, удобно ложится в руку.нагревается быстро.при включении загорается светодиод.регулятор нагрева работает нормально.качество материала на первый взгляд даже не плохое.в нагрузку к паяльнику положили переходник,хотя он вставляется в розетку и без переходника.я пока доволен.Спасибо!

размер паяльника 18см. лёгкий, удобно ложится в руку.нагревается быстро.при включении загорается светодиод.регулятор нагрева работает нормально.качество материала на первый взгляд даже не плохое.в нагрузку к паяльнику положили переходник,хотя он вставляется в розетку и без переходника.я пока доволен.Спасибо!

Отличный паяльник. по очень хорошей цене. Я полностью доволен покупкой. В магазинах продают такой же за 1500 рублей. Здесь цена в 3 раза ниже. Рекомендую.

Отличный паяльник. по очень хорошей цене. Я полностью доволен покупкой. В магазинах продают такой же за 1500 рублей. Здесь цена в 3 раза ниже. Рекомендую.

Отличный паяльник. по очень хорошей цене. Я полностью доволен покупкой. В магазинах продают такой же за 1500 рублей. Здесь цена в 3 раза ниже. Рекомендую.

Chegou muito rápido, funcionando perfeitamente eu recomendo este vendedor. podem comprar sim. Obrigado.

Chegou muito rápido, funcionando perfeitamente eu recomendo este vendedor. podem comprar sim. Obrigado.

Chegou muito rápido, funcionando perfeitamente eu recomendo este vendedor. podem comprar sim. Obrigado.

It is nicely made with good quality plastic, metal and ceramic heating element. The only negative that i could find is that the tips does not fit snuggle to the heating element, there is a small gap, which actually reduce the initial heating ability, as my tests indicates (read below). I did the following tests with the following results: I set the temperature around 275 oC. After around 45 seconds i could see the solder starting slightly to melt (typical 60/40) and at 55 seconds it melt instantly. After 3 minutes i measured the temperature at the tip (with my multi-meter) and it was 379 oC. I put the temperature to the maximum and after few minutes i could see that the metals and the tip, changing color to black... clearly they were not happy at this temperature... i have measured 520 oC. Unplugged it and let it cool down to room temperature (19 oC). This time i have put the minimum temperature (less than 200 oC) and i measured the temperature when a saw the solder melting. It started to melt around 50 seconds later in the temperatures of 180 oC. After 5 minutes it has been stabilized in 336 oC. At this point i have measured the temperature to the plastic (the lowest point, very close to metal) and it was 67 oC and finally measured the rubber material at 37oC. During the whole process the top plastic part was pretty cool and the rubber material very pleasant to the touch, not hot at all even at 520 oC. I can see the extra temperature as a good sign, because when you start soldering the temperature rapidly decreases. I am VERY HAPPY and I HIGHLY RECOMMENCED this soldering iron. I don't know about durability, only time will tell.

It is nicely made with good quality plastic, metal and ceramic heating element. The only negative that i could find is that the tips does not fit snuggle to the heating element, there is a small gap, which actually reduce the initial heating ability, as my tests indicates (read below). I did the following tests with the following results: I set the temperature around 275 oC. After around 45 seconds i could see the solder starting slightly to melt (typical 60/40) and at 55 seconds it melt instantly. After 3 minutes i measured the temperature at the tip (with my multi-meter) and it was 379 oC. I put the temperature to the maximum and after few minutes i could see that the metals and the tip, changing color to black... clearly they were not happy at this temperature... i have measured 520 oC. Unplugged it and let it cool down to room temperature (19 oC). This time i have put the minimum temperature (less than 200 oC) and i measured the temperature when a saw the solder melting. It started to melt around 50 seconds later in the temperatures of 180 oC. After 5 minutes it has been stabilized in 336 oC. At this point i have measured the temperature to the plastic (the lowest point, very close to metal) and it was 67 oC and finally measured the rubber material at 37oC. During the whole process the top plastic part was pretty cool and the rubber material very pleasant to the touch, not hot at all even at 520 oC. I can see the extra temperature as a good sign, because when you start soldering the temperature rapidly decreases. I am VERY HAPPY and I HIGHLY RECOMMENCED this soldering iron. I don't know about durability, only time will tell.

It is nicely made with good quality plastic, metal and ceramic heating element. The only negative that i could find is that the tips does not fit snuggle to the heating element, there is a small gap, which actually reduce the initial heating ability, as my tests indicates (read below). I did the following tests with the following results: I set the temperature around 275 oC. After around 45 seconds i could see the solder starting slightly to melt (typical 60/40) and at 55 seconds it melt instantly. After 3 minutes i measured the temperature at the tip (with my multi-meter) and it was 379 oC. I put the temperature to the maximum and after few minutes i could see that the metals and the tip, changing color to black... clearly they were not happy at this temperature... i have measured 520 oC. Unplugged it and let it cool down to room temperature (19 oC). This time i have put the minimum temperature (less than 200 oC) and i measured the temperature when a saw the solder melting. It started to melt around 50 seconds later in the temperatures of 180 oC. After 5 minutes it has been stabilized in 336 oC. At this point i have measured the temperature to the plastic (the lowest point, very close to metal) and it was 67 oC and finally measured the rubber material at 37oC. During the whole process the top plastic part was pretty cool and the rubber material very pleasant to the touch, not hot at all even at 520 oC. I can see the extra temperature as a good sign, because when you start soldering the temperature rapidly decreases. I am VERY HAPPY and I HIGHLY RECOMMENCED this soldering iron. I don't know about durability, only time will tell.