Moteur brushless CW/CCW Flashhobby BX1306 1306 4000KV pour Multicoptère
Une partie de la critique a été traduite automatiquement.
Brought these as a replacement for the 3100kv motors same manufacturer, I wanted a bit more lift. (130mm frame, 50% throttle at 250grams on 2 blade 3045 props gets it off the ground). I found they got warm (not hot) o touch on 4s (same with the 3100s) after a minute long "test" fly around. Ran full throttle on 3s with 3045 no worries. Going to try 3 and 4 blade props
Ca transforme un 130 en missile ;-)
Silicone wires, smooth running, overall good build quality.. no complaints. And yes, there's always a pair of them in the box. Running them on 3S with DAL 3045 propellers.
I have a 130mm quad with these and running 3s batteries. Hold up well in crashes. No noticeable vibrations or issues.
Use them on my 150 mm quad with 3" props.
I use it for my dragon :) . good with mamba F405 mini
I'm using them on my 130 frame. they work well and perform well. I run them on 3s with out a problem. I highly recommend them.
These run great on 3S, but the T urnigy Nano-Tech 65C were too much and the magic smoke escaped on one before I could cut the power. Might be ok with 4S 25C batteries, but take care.
Runs fine with 3S and 3 inch props
Got these to mount on a 130mm frame. good quality and providing good thurst on 3S / 4S battery