Disclaimer: I received this set for evaluation from Banggood, and did not have to pay for it. However I have tried to be impartial in my judgement of these bits. Features: The set of 12 tap drills, 6 each in Metric and SAE sizes, comes with a bit holder which enables quick changes on your drill. The bit holder has a spring loaded catch which holds the drill bit once it is inserted. To release the bit you have to pull back on the ring. I found this to be a very practical feature. The Metric bits in my set seem to have a yellow coating on them, but the SAE bits do not come with any such coating. The set comes in a well made, sturdy plastic case, with good hinges and a sliding lock, all built to last. The bits and the case arrived undamaged, and without a hint of rust or dent damage. This was so even though a couple of the bits worked themselves loose from their cylindrical holders within the case. Usage: I have tried the bits out on Aluminium sheet, upto 4 mm thick, and also Aluminium rod, upto 25 mm in diameter, as well as Acrylic sheet. In all cases, the bits cut well, and the tapped threads were formed well too. With Aluminium I used WD-40 as a cutting lubricant, to increase the life of the bits and to control "sticking". I have not yet experimented with mild steel, but the bits look good enough to tackle at least thin sheet upto say 2 mm in thickness. I also used it on acrylic sheet and there too the results were decent. I note that other reviewers speak of using it on 3-d printed parts (PLA/PETG/ABS plastic), and I would imagine that to be an excellent application for this set. Overall: Overall, I think these are good value for money and a recommended addition to any workshop.

Disclaimer: I received this set for evaluation from Banggood, and did not have to pay for it. However I have tried to be impartial in my judgement of these bits. Features: The set of 12 tap drills, 6 each in Metric and SAE sizes, comes with a bit holder which enables quick changes on your drill. The bit holder has a spring loaded catch which holds the drill bit once it is inserted. To release the bit you have to pull back on the ring. I found this to be a very practical feature. The Metric bits in my set seem to have a yellow coating on them, but the SAE bits do not come with any such coating. The set comes in a well made, sturdy plastic case, with good hinges and a sliding lock, all built to last. The bits and the case arrived undamaged, and without a hint of rust or dent damage. This was so even though a couple of the bits worked themselves loose from their cylindrical holders within the case. Usage: I have tried the bits out on Aluminium sheet, upto 4 mm thick, and also Aluminium rod, upto 25 mm in diameter, as well as Acrylic sheet. In all cases, the bits cut well, and the tapped threads were formed well too. With Aluminium I used WD-40 as a cutting lubricant, to increase the life of the bits and to control "sticking". I have not yet experimented with mild steel, but the bits look good enough to tackle at least thin sheet upto say 2 mm in thickness. I also used it on acrylic sheet and there too the results were decent. I note that other reviewers speak of using it on 3-d printed parts (PLA/PETG/ABS plastic), and I would imagine that to be an excellent application for this set. Overall: Overall, I think these are good value for money and a recommended addition to any workshop.

Disclaimer: I received this set for evaluation from Banggood, and did not have to pay for it. However I have tried to be impartial in my judgement of these bits. Features: The set of 12 tap drills, 6 each in Metric and SAE sizes, comes with a bit holder which enables quick changes on your drill. The bit holder has a spring loaded catch which holds the drill bit once it is inserted. To release the bit you have to pull back on the ring. I found this to be a very practical feature. The Metric bits in my set seem to have a yellow coating on them, but the SAE bits do not come with any such coating. The set comes in a well made, sturdy plastic case, with good hinges and a sliding lock, all built to last. The bits and the case arrived undamaged, and without a hint of rust or dent damage. This was so even though a couple of the bits worked themselves loose from their cylindrical holders within the case. Usage: I have tried the bits out on Aluminium sheet, upto 4 mm thick, and also Aluminium rod, upto 25 mm in diameter, as well as Acrylic sheet. In all cases, the bits cut well, and the tapped threads were formed well too. With Aluminium I used WD-40 as a cutting lubricant, to increase the life of the bits and to control "sticking". I have not yet experimented with mild steel, but the bits look good enough to tackle at least thin sheet upto say 2 mm in thickness. I also used it on acrylic sheet and there too the results were decent. I note that other reviewers speak of using it on 3-d printed parts (PLA/PETG/ABS plastic), and I would imagine that to be an excellent application for this set. Overall: Overall, I think these are good value for money and a recommended addition to any workshop.

Grands produits recommandent l'achat

ótimos produtos recomendo comprar

Grands produits recommandent l'achat

I need to mention that I received this product for review. I have not received any money nor have I been advised on how I should review this product. All information is based on MY perception of the product! Package was well packed and nothing was received broken. Case: Well-built case with working latch. Decent hinges that will last. Tools: All Bits are sharp and is covered with a thin layer of oil/grease to keep it from rusting. There is no rust or "Pitting" noted on the bits. The set contains both Metric and SAE sizes. Very nice to have both. So for the tools work well in light metal and even tested in wood and plastic. Will definitely be using this with my 3d printed projects! Very useful 6.35 shank included for quick tool changes. Turn the tool SLOWELY while making threads especially if power tool is used for threading. Thanks Bang good for yet another good product on your list!

I need to mention that I received this product for review. I have not received any money nor have I been advised on how I should review this product. All information is based on MY perception of the product! Package was well packed and nothing was received broken. Case: Well-built case with working latch. Decent hinges that will last. Tools: All Bits are sharp and is covered with a thin layer of oil/grease to keep it from rusting. There is no rust or "Pitting" noted on the bits. The set contains both Metric and SAE sizes. Very nice to have both. So for the tools work well in light metal and even tested in wood and plastic. Will definitely be using this with my 3d printed projects! Very useful 6.35 shank included for quick tool changes. Turn the tool SLOWELY while making threads especially if power tool is used for threading. Thanks Bang good for yet another good product on your list!

I need to mention that I received this product for review. I have not received any money nor have I been advised on how I should review this product. All information is based on MY perception of the product! Package was well packed and nothing was received broken. Case: Well-built case with working latch. Decent hinges that will last. Tools: All Bits are sharp and is covered with a thin layer of oil/grease to keep it from rusting. There is no rust or "Pitting" noted on the bits. The set contains both Metric and SAE sizes. Very nice to have both. So for the tools work well in light metal and even tested in wood and plastic. Will definitely be using this with my 3d printed projects! Very useful 6.35 shank included for quick tool changes. Turn the tool SLOWELY while making threads especially if power tool is used for threading. Thanks Bang good for yet another good product on your list!

Un bon kit de perceuse à fileter. J'avais hâte d'y être. Jusqu'à présent, je n'ai utilisé que la taille M6x1.0, pour l'instant. Il a fait un travail parfait.

A good threading drill kit. I was looking forward to it. So far I have only used the M6x1.0 size, yet. It did a perfectly good job.

Un bon kit de perceuse à fileter. J'avais hâte d'y être. Jusqu'à présent, je n'ai utilisé que la taille M6x1.0, pour l'instant. Il a fait un travail parfait.

Kombinuotas grąžtas su sriegikliu. Aliuminiui, variui, plastikui. Išgręžia ir padaro sriegį per vieną operaciją. Supakuota gerai, greitas pristatymas.

Kombinuotas grąžtas su sriegikliu. Aliuminiui, variui, plastikui. Išgręžia ir padaro sriegį per vieną operaciją. Supakuota gerai, greitas pristatymas.

Kombinuotas grąžtas su sriegikliu. Aliuminiui, variui, plastikui. Išgręžia ir padaro sriegį per vieną operaciją. Supakuota gerai, greitas pristatymas.

Les mors sont super. La boîte qui les accueille est très intelligente et protège bien les embouts. Je ne peux pas tous les tester, mais ceux que j'ai testé ont très bien fait leur travail!

Os Bits são ótimos. A caixa que os acomoda é bem inteligente e protege bem os bits. Não consigo testar todos, mas os que testei fizeram muito bem o seu trabalho!

Les mors sont super. La boîte qui les accueille est très intelligente et protège bien les embouts. Je ne peux pas tous les tester, mais ceux que j'ai testé ont très bien fait leur travail!

Parfait! Complétera mes forets.

Perfeito! Vai complementar minhas brocas.

Parfait! Complétera mes forets.

Merci beaucoup. Je n'ai pas encore essayé

Köszönöm szépen. Még nem próbáltam. Tetszik

Merci beaucoup. Je n'ai pas encore essayé

Qualité décente, je recommande.

Достойное качество, рекомендую.

Qualité décente, je recommande.

Il a fallu trois semaines pour que la qualité soit normale.

дошло за три недели качество нормальное.

Il a fallu trois semaines pour que la qualité soit normale.