https://youtu.be/imOo4wiVWpY super led for night fpv racing 2 leds wired in series

https://youtu.be/imOo4wiVWpY super led for night fpv racing 2 leds wired in series

https://youtu.be/imOo4wiVWpY super led for night fpv racing 2 leds wired in series

Nice Night Fly FPV Mod! Needs A large heat sink!!!

Nice Night Fly FPV Mod! Needs A large heat sink!!!

Nice Night Fly FPV Mod! Needs A large heat sink!!!

Ça vient d'une caméra de nid. Pas de lumière du tout. J'ai essayé d'utiliser des conducteurs en led, mais celui - ci en a tué 3. A dû se contenter d'un 10w 8.2 ohm résistant. Durée 3 à 5 min. Ils deviennent vraiment chauds. Joli ajustement à l'intérieur d'une lampe de poche Milwaukee M12.

This is from a nest camera. No light at all. I tried using led drivers but this led killed 3 of them. Had to settle for a 10w 8.2 ohm resister. Run time 3 to 5 min. They get really hot. Nice fit inside a Milwaukee m12 flashlight.

Ça vient d'une caméra de nid. Pas de lumière du tout. J'ai essayé d'utiliser des conducteurs en led, mais celui - ci en a tué 3. A dû se contenter d'un 10w 8.2 ohm résistant. Durée 3 à 5 min. Ils deviennent vraiment chauds. Joli ajustement à l'intérieur d'une lampe de poche Milwaukee M12.

Specs and practical does not add up. 10W at 5V should be 2A, but the specs say 1A. Tested give me 2,5A +- with Product ID: 1123527, 5V step down charger module. Will play with resistors to limit the current and see what I can work out

Specs and practical does not add up. 10W at 5V should be 2A, but the specs say 1A. Tested give me 2,5A +- with Product ID: 1123527, 5V step down charger module. Will play with resistors to limit the current and see what I can work out

Specs and practical does not add up. 10W at 5V should be 2A, but the specs say 1A. Tested give me 2,5A +- with Product ID: 1123527, 5V step down charger module. Will play with resistors to limit the current and see what I can work out

Power: 10W Forward Voltage:4.5V~5V Forward Current: 1000mA U*I=P 5V*1000mA= 5W

Power: 10W Forward Voltage:4.5V~5V Forward Current: 1000mA U*I=P 5V*1000mA= 5W

Power: 10W Forward Voltage:4.5V~5V Forward Current: 1000mA U*I=P 5V*1000mA= 5W

Selon l'annonce

De acordo com o anúncio

Selon l'annonce

Selon l'annonce

De acordo com o anúncio

Selon l'annonce

D'accord

ok

D'accord

Produit conforme état apparent neuf a tester ultérieurement prix très correct

Produit conforme état apparent neuf a tester ultérieurement prix très correct

Produit conforme état apparent neuf a tester ultérieurement prix très correct

Very bright LED, pay attention to the voltage! Optimal for night vision systems.

Very bright LED, pay attention to the voltage! Optimal for night vision systems.

Very bright LED, pay attention to the voltage! Optimal for night vision systems.