Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (500)
  • Image (48)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(500)
    • 5 Étoile(454)
    • 4 Étoile(40)
    • 3 Étoile(3)
    • 2 Étoile(0)
    • 1 Étoile(3)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (France)
|
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 18/08/2015

    I used this module to build a variable power supply. I use an input voltage of 12 volts (from a computer power supply) and need this module to create a variable (settable via the potmeter) output voltage ca 1 - 30 volt. With output voltages over 12 volts everything works fine. In the step down mode (voltages below 12 volt) the output voltage is not stable. For instance if I set the output voltage to 5 volts and apply no or very little load, then the outputvoltage "swings" between 4.8 and 5.3 volt. This only stops if I apply a larger load that draws at least 500mA of current.

    Commentaires
    Afficher l'original
  • 24/05/2020

    Excellent produit. Je l'ai utilisé pour construire un banc d'alimentation avec 2 canaux variables et il fonctionne bien.

    Commentaires
    Afficher l'original
  • 09/05/2021

    Commandez à temps et bien emballé. Je l'ai testé avec ma source de comptoir et j'ai mis un multimètre à la sortie et je l'ai réglé pour une sortie à basse tension. Ça ne s'est pas réchauffé. Mais je recommande le plus grand soin de ne pas renverser les tensions d'entrée parce qu'elles peuvent donner lieu à des problèmes. Très petit et très compact. Je recommande cet article. Regarde les photos.

    Commentaires (1)
    Afficher l'original
  • Antonin
    FR
    11/07/2020

    Très bien, avec un sac antistatique. Le produit a été emballé correctement. Réglage de la ligne est bon, testé avec 5-30v en entrée, et 2A charge. Convient pour LED, ou pas de dispositif analogique sans filtre. La limitation actuelle fonctionne bien. Je suis un peu déçu du choix du condensateur. Il s'agit de 105 degrés, mais seulement 35V. Les 50v auraient permis une meilleure durée de vie.

    Commentaires
    Afficher l'original
  • 29/08/2017

    This is excellent step-up/step-down converter, that can be used for simple bench power supply. Replace variable resistors with these panel mounting 250 KOhm potentiometers ( http://bit.ly/2wOHvro ), add solid power supply ( http://bit.ly/2wOrJfY ) voltage/current monitor ( http://bit.ly/2wOrWjg ) and put everything in a nice box ( http://bit.ly/2wOHVOu )

    Commentaires
    Afficher l'original
  • 08/08/2017

    this converter can help you in solving many power supply problems. it is able to increase or decrese the voltage at its output terminal compared to the input voltage. the output is quite stable with the load change and the multi turns trims help you in adjusting the output voltage level and the max output current as per your needs. One of the thermal pad below the MOSFET was slightly out of position, but I solved this issue very quickly - check the pads before power up the circuit. good value for money. suggested questo convertiore permette di aumentare o diminuire la tensione in uscita rispetto al valore della tensione di ingresso. la tensione di uscita è stabile rispetto alle variazioni della corrente del carico. i trim multigiri permettono una buona regolazione della tensione e della massima corrente di uscita. Un MOSFET aveva il pad termico leggermente fuori posto, ma ho risolto velocemente il problema. suggerisco un controllo dei pad termici prima di dare tensione al circuito ottimo valore per il prezzo. suggerito

    Commentaires
    Afficher l'original
  • 24/10/2016

    Seems to work well. I will use it to have a portable power pack for all situations (recharge PC, drone Lipos, etc.). Will see how it hold up in time.

    Commentaires
    Afficher l'original
  • 05/07/2016

    Преобразователь из низкого напряжения от 1.5 вольт может заряжать аккумулятор 12-24 вольта,правда при этом достаточно сильно греется.

    Commentaires (1)
    Afficher l'original
  • 23/06/2017

    I am using this to boost battery voltage to supply power into a class D amplifier. Now I can use full volume without clipping.

    Commentaires
    Afficher l'original
  • 15/05/2019

    Works great and it doesnt heat up. Used a 12V SMPS with this and can only reach 1.1V - 29V. I hoped to reach 30V but this has the best value for buck boost converters here. 5 stars!

    Commentaires
    Afficher l'original
Show:

    Total 0 pages

    Aller à la page

    Vous pourriez être intéressé par

    recommendation for you
    • 12,66€
    • 6,88€
    • 6,42€
    • 7,41€
    • 10,43€
    • 7,34€
    • 6,42€
    • 9,17€
    • 6,42€
    • 4,58€
    • 5,50€
    • 8,25€
    • 31,55€
    • 5,50€
    • 35,05€
    • 4,58€
    • 3,38€
    • 22,90€