Livrer à United Kingdom , USD

Reviews des clients

4.33 sur 5
Ecrire un commentaire
  • Tous les Commentaires (6)
  • Image (0)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(6)
    • 5 Étoile(3)
    • 4 Étoile(2)
    • 3 Étoile(1)
    • 2 Étoile(0)
    • 1 Étoile(0)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
    • En général :
    • Prix:
    • Qualité:
    • Apparence:
    Produkt arraived

    2016-09-21 09:26:57

    After 2 week package arrived AT.

    Commentaires (1)
    • En général :
    • Prix:
    • Qualité:
    • Apparence:
    good

    2016-09-13 19:47:38

    good

    Commentaires
    • En général :
    • Prix:
    • Qualité:
    • Apparence:
    Get some new nozzles

    2016-06-21 17:13:47

    They keep clogging. Whatever the temp or feed rate. I tried to clean the nozzle to get rid of this problem. It broke during re-assembly. If you buy this printer, get some new nozzles, too.

    Commentaires
    • En général :
    • Prix:
    • Qualité:
    • Apparence:
    Not all Metal - Most Important Part - PLASTIC

    2016-02-03 10:06:17

    Overall this printer is looks great and performs well for now. It's very sturdy and all the parts are metal or acrylic...........except the X Axis belt bracket. The bracket for the Y axis is aluminum. Why they would make such an important part as a belt fastener behind two very hot extruders out of plastic is beyond me. The teeth are softening on the bracket that holds the belt ends from the heat and the X Axis belt slipped out once already. I've only printed three 2mm X 10mm square cubes. To

    Commentaires (6)
    • En général :
    • Prix:
    • Qualité:
    • Apparence:
    Quite nice for starters...

    2016-01-07 07:50:23

    Overall a good printer, needs some tweaking to get good results. Had to exchange both z-axis mounts, after about a month because the fixation for the bearings broke on both sides. Don't use the presets in the software from geeetech website, the results are bad. Look on youtube for a tutorial for Slic3r software and start experimenting. After half a role of fillament wasted results were pretty good

    Commentaires
    • En général :
    • Prix:
    • Qualité:
    • Apparence:
    Received my 3D printer correctly packed and fully workable.

    2015-12-14 05:02:18

    Sadly, the delivery was delayed because the ZIP code was wrong and not corresponding with the one I have on file by Banggood. It was not the first time this issue occured.

    Commentaires (1)
  1  

Vous pourriez être intéressé par

Enquête de Satisfaction

Téléchargez l'application pour obtenir une exclusivité 10% off coupon