Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (2848)
  • Image (469)
  • Vidéo (9)
  • Toutes les Étoiles
    • Toutes les Étoiles(2848)
    • 5 Étoile(2702)
    • 4 Étoile(134)
    • 3 Étoile(11)
    • 2 Étoile(1)
    • 1 Étoile(0)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (France)
|
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 20/11/2016

    I bought the FlySky FS-i6 for all my 10 drones. It supported the old AFHDS protocol for using mini RX receiver (DasMikro Ultra Miniature) and with AFHDS 2A I'm using all my RX receiver FS-iA6B. It come with USB cable for flashing or training on PC. The transmitter ist for beginner and for advanced aviators. With iBUS protocol you can use all the 4 buttons and two variable buttons on your quadcopter. Low cost and very, very good.

    Commentaires (1)
    Afficher l'original
  • 05/12/2016

    Fonctionne très bien, je l'utilise en I-bus sur une SP F3 racing de chez Bangood. A savoir : bien que vendues ensemble, il faut binder le récepteur avec la radio!

    Commentaires
    Afficher l'original
  • 03/05/2019

    Great Transmitter! Great Price! It was a bit of a challenge, as a newbie, to get all 10 channels to be enabled with the FS-A8S receiver. No firmware update is needed! I used two 16 channel converter modules, S2PW's, (each only has 8 outputs configurable for channels 1-8 (no red light) or 9-16 (red light active). The converter modules are setup, factory stock, to be channels 1-8. To enable channels 9-16 you need to press the button and hold it in while powering on those modules, then release. This only needs to be done once and they save their settings. The FS-A8S needs to be connected to the i.BUS input of the S2PW module configured for channels 9-16 (red light) when using more than 8 channels. The module, with the red lights output needs to be connected to the input of the second S2PW module configured as Channels 1-8 (no red light). At first, I had the A8S connected to the channel 1-8 module (no red light) and it did not allow channels 9-10 to get through to the second module. I then connected the A8S to the channel 9-16 module (red light) and everything works as expected with the 10 Channels of this radio. I included a Photo with how I set this up, the yellow wire between the two S2PW modules is the i.BUS signal. Red and black wires are power and ground wires. The transmitter "RX Mode" settings need to be set to output PPM on i.BUS. You also need to turn on all the AUX Switches. Save all settings and go into the "Display" mode of the transmitter, press UP/DOWN buttons to view channels 8-10. There is also a much more detailed manual on the manufacture website product page, there is no need to update the firmware to enable 10 channels and it may actually downgrade your radio to older firmware.

    Commentaires
    Afficher l'original
  • 19/02/2017

    1. cheap; 2. popular; 3. w/ i-bus included; 4.up-gradable (antenna/battery/firmware); 5. responsive; 6. even skins are available for this one!... It deserves to be choosen.

    Commentaires
    Afficher l'original
  • 03/04/2021

    Qualité acceptable, il ne semble pas jouet, mais pour le prix, bien adapté pour ceux qui ont commencé dans le RC, il a fallu moins que ce qui a été dit le début, jusqu'à 15 jours, j'espère pouvoir l'utiliser bientôt, mais avec des pratiques suffisantes! 😊

    Commentaires
    Afficher l'original
  • 27/04/2018

    ürün açıklamasında yazdığı gibi geldi. bu mesajı Türk kullanıcılar için yazıyorum. Gönül rahatlığı ile alabilirsiniz.

    Commentaires (1)
    Afficher l'original
  • 17/08/2020

    Reçu dans le temps et la forme, la qualité des matériaux est bonne, je ne dirais pas excellent mais pour le prix est plus que suffisant, je ne le goûte toujours pas vraiment, j'attends un autre article pour essayer, mais il est apprécié plus que bon, merci bangood

    Commentaires
    Afficher l'original
  • 20/10/2020

    parfait ! colis un peu abimé mais sa c'est les services postaux qui son pas soigneux sinon marche parfaitement ce qui est dommage c'est qui manque un manuel ( même en anglais) pour le récepteur fs x6b avec mais sa devrai ce trouvé sur internet, du coup, pas pu essayer le récepteurs encore . je recommande c'est un super ensemble pour ce lancé dans le fpv et comprendre comment raccorder un vrai récepteur qui a l'air vraiment plus puissant que le fsa8s.

    Commentaires (2)
    Afficher l'original
  • 28/02/2020

    Très bon émetteur 2,4 GHz 6-10 ch pour mes avions. Avec des capteurs d'altitude et de tension, vous pouvez surveiller la hauteur du plan et la capacité de la batterie. Et si vous mettez à jour le logiciel, vous pouvez surveiller RSSI.

    Commentaires
    Afficher l'original
  • eygll
    TR
    07/02/2021

    Fonctionnalité désirée à un prix raisonnable

    Commentaires (2)
    Afficher l'original
Show:

    Total 0 pages

    Aller à la page

    Vous pourriez être intéressé par

    recommendation for you
    • 70,10€
    • 259,81€
    • 9,17€
    • 31,08€
    • 15,83€
    • 126,26€
    • 35,80€
    • 76,01€
    • 10,55€
    • 143,67€
    • 4,58€
    • 22,09€
    • 28,50€
    • 33,04€
    • 10,55€
    • 198,30€
    • 62,65€
    • 386,51€