Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (623)
  • Image (105)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(623)
    • 5 Étoile(593)
    • 4 Étoile(22)
    • 3 Étoile(5)
    • 2 Étoile(3)
    • 1 Étoile(0)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (France)
|
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 17/11/2017

    This is my first quad, I did not want to build a big quad like 450 nor a small racing drone. This frame is perfect for beginners. Good frame didnt see any wraps in arms. My setup is: 1) Motor : 2208 1400kv 2) Prop: 8045 3) ESC: Racestar 20A Opto ESC 4) Flight Controller: SP Racing F3 5) Battery : 2200mah 35C Gave me about 12-14min of flight time (hover) Total weight of the quad is 620 grams with above mentioned specs.

    Commentaires
    Afficher l'original
  • 15/11/2014

    Perfect: Sunnysky V2216-11 900KV on 4S and 9" (max prop for this frame size)

    Commentaires
    Afficher l'original
  • 29/12/2017

    Доставка 46 дней. Больше ожидаемого. Рама упакована компактно, Материалы качественные, винты хорошие. Собирается легко, Нижняя пластина с разводкой питания, что удобно. Вес 159 граммов. В собранном виде прочна, Для начального использования и тестов при этой цене отличный вариант! Рекомендую!

    Commentaires
    Afficher l'original
  • 21/05/2015

    Warped Plastic Part? Here’s how to fix it Seeing the reviews about this part, I was not shocked to receive one with a warped arm in the USA in early April. Thinking about the choices, I elected not to ask Banggood for another part, but chose to try to fix the one red arm that was warped. The offending arm had it’s motor mount at an angle of about 5 degrees to the base, where the other three arms had an angle of about 2 degrees (Pix A and B). I took a piece of lumber (Pix C) and cut it and added shims so it fit the correct arms properly (Pix D). Removing the good white arm and inserting the bad red arm in the fixture, we can clearly see how warped the bad one is (Pix E). Using the fixture, it is possible to force the red arm into the correct shape using two clamps (Pix F). I drilled a 1/16 hole in the warped arm and inserted a thermocouple in it in order to measure the temperature of the plastic (Pix G). Now the task is to heat the arm until it softens while in the correct position. To do this, the entire assembly of arm, fixture and clamps are placed in the preheated small oven and heated until the plastic temperature stabilized (Pix H). NOTE: Do NOT use an oven that is used for food preparation! Heating plastic often releases toxic gasses which can contaminate any other items placed in that oven. Use an oven devoted to heat treatments only. The melting temperature of plastic varies with the type of plastic being treated. In this case, we do not want to melt the plastic, we just want to soften it and allow it to cool in its’ new, correct shape. A temperature of 248 degrees F [120°C] was selected and the oven was turned on. The air temperature rose first (shown on the round dial inside the oven), and the temperature of the plastic (measured by the thermocouple) rose minutes later. When the plastic temperature stabilized at 225°F [107°C] in 10 minutes, the oven was turned off and the entire contents slowly cooled. The times and temperatures are shown in Pix H. Upon removing the contents and separating the red arm from the fixture, the arm now has the correct shape and can be used (Pix I)

    Commentaires
    Afficher l'original
  • 09/10/2018

    paket çok hızlı bir şekilde elime ulaştı ve iyi paketlenmisti bu bakımdan sorunsuz kargo urunnkalitesine gelince esnek bir malzemeden yapılmış buna rağmen mukavemetli görünüyor bir problem olacağını sanmıyorum olsa dahi fiyatı karbon fiber olan emsallerine göre gayet uygun sonuçta laza çarpma vs gibi durumlarda ne olursa olsun kırılmalar bukulmeler meydana gelebiliyor kısacası ucuz kaliteli ise yarar bir urun ve hizli kargo da eklenince gayet iyi bir alternatif.

    Commentaires
    Afficher l'original
  • 16/01/2019

    This frame went together easy. Sturdy and light. Perfect for my purpose. Since I had crashed and broke a bugs 3 frame. I thought it would be fun to transplant that hardware from my bugs 3 to the F330 frame. Worked out good.. Works better then expected!

    Commentaires
    Afficher l'original
  • 03/02/2018

    I like It because a good finish product and strong also

    Commentaires
    Afficher l'original
  • 08/01/2018

    im impressed!! very good for its price. holes doesnt aligh perfectly but atleast it works for its purpose! love it. i modded the arm. i remove the landing skid in the arm. im planning to put DJI phantom landing gear and drill some holes to fit. over all i like how it looks! great product for the price.

    Commentaires
    Afficher l'original
  • 31/03/2016

    Perfetto, si monta in un attimo, ha la pcb integrata e pesa meno di quello dichiarato nella descrizione . La diagonale da centro motore a centro motore di 340 mm ,il peso del telaio nudo è 150 g netti ed è rifinito molto bene. Unico difetto , se così si può chiamare, è che montato non è rigidissimo e i bracci si flettono facendo poca forza con le mani ma penso che in volo non dovrebbero esserci problemi di torsione. Di sicuro vale molto più di quello che costa, ottimo prodotto !!

    Commentaires
    Afficher l'original
  • 21/03/2021

    Excellent produit, très léger et très résistant. Beau design. 100% recommandé. Livraison rapide; en seulement 15 jours est arrivé de Chine

    Commentaires
    Afficher l'original
Show:

    Total 0 pages

    Aller à la page

    Vous pourriez être intéressé par

    recommendation for you
    • 89,20€
    • 7,42€
    • 10,11€
    • 15,26€
    • 52,41€
    • 6,36€
    • 13,34€
    • 24,82€
    • 11,62€
    • 35,04€
    • 19,30€
    • 10,58€
    • 44,14€
    • 7,35€
    • 7,39€
    • 6,75€
    • 6,34€
    • 15,63€