Avis des clients

Ecrire un commentaire
  • Tous les Commentaires (149)
  • Image (9)
  • Vidéo (0)
  • Toutes les Étoiles
    • Toutes les Étoiles(149)
    • 5 Étoile(133)
    • 4 Étoile(10)
    • 3 Étoile(3)
    • 2 Étoile(2)
    • 1 Étoile(1)
Trier par:
Commentaire Top
  • Commentaire Top
  • Le plus utile
  • Le plus récent
Avis uniquement de votre pays (France)
|
Afficher l'original

Une partie de la critique a été traduite automatiquement.

  • 04/10/2017

    Utilisé avec un Uno,montage propre qui permet de superposer d'autres shields. Horloge temps réel OK avec la librairie RealTimeClockDS1307.h et gestion de la SD OK avec ChipSelect 10. Tests faits avec une micro SD 64Go + adaptateur; NB: pour les SD > 4Go, le programme CardInfo (fourni avec la lib) est à adapter car la variable volumesize utilisée pour donner la taille en bytes ne gère pas un nombre > 4Go. ReadWrite et Datalogger testés OK avec les exemples fournis avec la librairie SD.h (mettre CS 10 au lieu de CS 4) . Fichiers relus sans problème sur le PC Il va m'être très utile dans un projet de logging de températures et de tensions sur un ou plusieurs jours.

    Commentaires (1)
    Afficher l'original
  • 27/05/2022

    Bien emballé et reçu en bon état mais délai de livraison un peu lent (28 jours calendaires à partir de la commande). L'alimentation 3V3 intégrée et le changement de niveau facilitent l'ajout d'une carte SD à un 5V UNO. l'horloge en temps réel et la zone de prototypage sont un joli bonus. Je suis heureux de recommander ces boucliers.

    Commentaires
    Afficher l'original
  • 01/03/2018

    Monta le memorie SD ed è solido e valido per il suo uso. Lo consiglio vivamente a tutti!!!

    Commentaires
    Afficher l'original
  • 25/07/2016

    I used this with an Arduino Mega R3 . I was collecting data samples from a photovoltaic charging system; which also provided the power. I used a fresh clock battery as the one supplied seemed a little low. The SD card was a 1GB which I had already formatted on a PC as FAT32. The clock software is standard library for the 1307. For the SD card I used the Adafruit SD library which is easier to use than the standard library.. The SD libraries are big so the smaller Arduinos might be tight if your code is large too. The shield works well and the clock keeps excellent time. I will use more of these for sure.

    Commentaires
    Afficher l'original
  • 12/02/2022

    Funcionando bem. Tudo certo.

    Commentaires
    Afficher l'original
  • 14/05/2019

    Premium quality, fast delivery. It is a cool product to log datas of my arduino.

    Commentaires
    Afficher l'original
  • 08/07/2017

    Saubere Verarbeitung und voll Funktionstüchtig.

    Commentaires
    Afficher l'original
  • 14/12/2016

    Alguno de los pines venia ligeramente doblado a pesar de que estava bien protegido e insertado en espuma tal como se aprecia en la imagen

    Commentaires
    Afficher l'original
  • 25/01/2016

    I received the device without the crystal that appears in the original picture. Despite the lack of the element the board worked, but it did not keep accuracy of the clock; so I had to install the crystal and then it worked better.

    Commentaires
    Afficher l'original
  • 30/12/2018

    J'ai reçu mon shield logger en bonne état. Pas de pin de croche. Reçu rapidement avec l'option de transport accéléré. La batterie est dans un petit sac donc elle devrait être bien chargée. Le look est pareil à la photo. Cependant il ne faut pas s'attendre à obtenir des fichiers librairie pour le faire fonctionner!

    Commentaires (2)
    Afficher l'original
Show:

    Total 0 pages

    Aller à la page

    Vous pourriez être intéressé par

    recommendation for you
    • 47,37€
    • 26,90€
    • 16,91€
    • 6,34€
    • 7,92€
    • 6,43€
    • 7,81€
    • 7,96€
    • 3,67€
    • 7,42€
    • 6,43€
    • 2,75€
    • 3,67€
    • 5,51€
    • 15,15€
    • 14,87€
    • 14,86€
    • 20,17€