Very good, works perfect for my skateboard. It fit perfect on my Paris trucks.

Very good, works perfect for my skateboard. It fit perfect on my Paris trucks.

Very good, works perfect for my skateboard. It fit perfect on my Paris trucks.

bien

good

bien

Need to use heaps of locktite 243 or stronger 15mm belt would be better, the 10mm one with this kit slips under large brake loads but is otherwise great. The 'aces' wheels from 'premierwheelco' in Australia fit perfectly with holes already there and drive cog outside dia the same as wheel inside dia. This style of wheel must have been used as the template for this kit. No affiliation just glad I lucked onto their site, cheap as well https://www.premierwheelco.com.au/product/aces/

Need to use heaps of locktite 243 or stronger 15mm belt would be better, the 10mm one with this kit slips under large brake loads but is otherwise great. The 'aces' wheels from 'premierwheelco' in Australia fit perfectly with holes already there and drive cog outside dia the same as wheel inside dia. This style of wheel must have been used as the template for this kit. No affiliation just glad I lucked onto their site, cheap as well https://www.premierwheelco.com.au/product/aces/

Need to use heaps of locktite 243 or stronger 15mm belt would be better, the 10mm one with this kit slips under large brake loads but is otherwise great. The 'aces' wheels from 'premierwheelco' in Australia fit perfectly with holes already there and drive cog outside dia the same as wheel inside dia. This style of wheel must have been used as the template for this kit. No affiliation just glad I lucked onto their site, cheap as well https://www.premierwheelco.com.au/product/aces/

The motor mount screws are not that great, I had to use a longer bolt and drill a hole in the axe and use metal epoxy to keep it secure, because it kept loosing up and fall. Fits a 5065 motor well. I`ve managed to fit it under a 80MM wheel but with some modifications. Kinda hard to find 70MM wheels with holes for the screws, so you will probably need to drill them out. Overall I`m pretty pleased for this, the belt didn`t break after some abuse.

The motor mount screws are not that great, I had to use a longer bolt and drill a hole in the axe and use metal epoxy to keep it secure, because it kept loosing up and fall. Fits a 5065 motor well. I`ve managed to fit it under a 80MM wheel but with some modifications. Kinda hard to find 70MM wheels with holes for the screws, so you will probably need to drill them out. Overall I`m pretty pleased for this, the belt didn`t break after some abuse.

The motor mount screws are not that great, I had to use a longer bolt and drill a hole in the axe and use metal epoxy to keep it secure, because it kept loosing up and fall. Fits a 5065 motor well. I`ve managed to fit it under a 80MM wheel but with some modifications. Kinda hard to find 70MM wheels with holes for the screws, so you will probably need to drill them out. Overall I`m pretty pleased for this, the belt didn`t break after some abuse.

I have a 6365 245 kV motor and the drivetrain is too small for this kind of power. Belt slip happens at full throttle and breaking hard. Belt tension is maximized. Required some 3D-printed parts to get the belt-pulley to sit nicely onto the wheel. My motor have to wide holes for mounting to fit the bracket, new ones had to be made. Plus for all extra screws that were included!

I have a 6365 245 kV motor and the drivetrain is too small for this kind of power. Belt slip happens at full throttle and breaking hard. Belt tension is maximized. Required some 3D-printed parts to get the belt-pulley to sit nicely onto the wheel. My motor have to wide holes for mounting to fit the bracket, new ones had to be made. Plus for all extra screws that were included!

I have a 6365 245 kV motor and the drivetrain is too small for this kind of power. Belt slip happens at full throttle and breaking hard. Belt tension is maximized. Required some 3D-printed parts to get the belt-pulley to sit nicely onto the wheel. My motor have to wide holes for mounting to fit the bracket, new ones had to be made. Plus for all extra screws that were included!

Pour moi c'était trop petit car j'ai une planche de montagne plus grande et je ne savais pas ce que je faisais mais pour un skateboard, je suis sûr que ce serait bien. Cependant, si j'étais vous, je gagnerais du temps et de l'argent et j'irais tout droit pour des ceintures de 5m au lieu de 3m

For me this was too small as I have a larger mountain board and didn't know what I was doing but for a skateboard I'm sure these would be fine. However if I were you I'd save time and money and go straight for 5m belts rather than 3m

Pour moi c'était trop petit car j'ai une planche de montagne plus grande et je ne savais pas ce que je faisais mais pour un skateboard, je suis sûr que ce serait bien. Cependant, si j'étais vous, je gagnerais du temps et de l'argent et j'irais tout droit pour des ceintures de 5m au lieu de 3m

Ça a l'air bien, pas encore utilisé.

Look good, not used yet.

Ça a l'air bien, pas encore utilisé.

Excellente performance et un produit authentique.

Excellent performance and a genuine product.

Excellente performance et un produit authentique.

Aa

Aa

Aa

bien

good

bien