Banggood

Happy with what i received for the price, and excellent delivery time to the UK, 9 days from order placed until i had them. My lathe takes a maximum tool size of 16mm which these are and fitted fine with no fettling. Tracking number provided and pre warning of delivery date and time when it hit the UK by email from Royal mail. One small gripe is one of the mcnn tool holders is by a different maker and just isn't as well finished, small this like being marked with its tool code, and a duller blackening not that it matters. Overall i would order again, going by the short time i have the tools.

Well packed. Relatively quick delivery time especially regarding holiday season. Good build quality. But not used yet, so i cant say something about quality of cutting metal.

Very good quality for the price I will be ordering more

Excelente calidad

good and 1week

ТОпчик набор +пластинки годные. Для повсидневки годно. Обдирка, доводка. + еще можно доюзывать боковую часть ромба. Державки прям качественные, подходят советские ромбики (у меня их много) )))).

I ordered a set of four lathe tools with diamond shaped inserts. They arrived in reasonable time and three of them were really good. The inserts fitted well and clamped down firmly. Unfortunately the fourth tool , which coincidentally had a different manufacturer's logo, would not fit the tool properly. The Yueda tools in the picture (Yellow logos) are fine, but the HZSK tool (Blue Logo), which I photographed across the top of the tool boxes was not usable in the condition I received it. The pocket in the tool was not the same angle as the insert. Normally, you would loosen the top clamp and swing it aside, then loosen the pin with the support insert then fit the gold insert, push everything down, tighten the pin, then swing the clamp back over the insert and tighten it down. With the faulty tool, I could not fit the gold insert into the pocket at all, even withe the pin loosened as far as possible. In the end I had to machine out the pocket to allow the insert to fit. I doubt my machining is as good as a properly made tool holder, but it works and it was too much hassle to return the defective part for a replacement. I have had good luck with tooling I have bought from you in the past, but this is not an acceptable situation, poor quality control.

Looks okee ,ordered on 3feb arrived on 12 feb (not a one week delivery as advertised ) but other wise no complaints inserts where included and fit , they have all there own key ,slightly oiled and well packed happy customer

Good quality tools. I originally accidentally received 2x Left hand turning tools instead of a left and right. Banggood sent me a whole new set. Tool quality is up there with my sandvik tools.

Ha superado mis expectativas, las cuchillas son robustas y las plaquitas que pedi para ellas cortan muy bien. Lo recomiendo 100%, por poner alguna pega, son algo cortas, 100mm de longitud, pero en la descripción lo pone y a mi me sirven perfectamente